I have a Tab Container in my page and it has 6 tab inside,when i try to add 7th tab and add inside that a TextBox It Shows me nothing.,
I can't see my textbox inside 7th panel .All i see is its header.It sounds weird to me.why is that?!!!!
P.S: i have no problem with other tabs!!!!!
I have an ajax tab container in an aspx page. Earlier I had 2 tab panels in the tab cotnainer. Now I want to add third tab panel. I could add the third panel but I am able to access the third panel, i.e. When I click on third panel, the panel is not shown(I didnt even get the handy cursor when i place the cursor on the third tab panel name).
View 1 RepliesI have a problem doing a partial page post back with an update panel within a tab container.
I am adding the control programmatically as follows
[Code]....
The controls are added to the tab container but the button now causes a full page postback. The button_click event is no longer called. Is there something I am missing here.
I have a ajax tab container that has a gridview inside one of the tab panels. I set the width of the grid view to less than the width of the tab container, but the gridview is not inside the tab panel. It goes outside the tab panel lines. How do I keep it inside the tab panel and have the horizontal and vertical scrolls bars for when it is larger than the tab panel?
View 3 RepliesThis is the question, how to open a modalPopup from a Asp:Link button inside a Tab panel?
Runtime error is Asp:Link ID not found, and thats because its in Tab Control, whats the work around?
I have implemented a collapsible panel which works properly. It collapse and it extends the content panel when the link corresponding to the information panel is clicked. Within the content panel I have an HTML table control containing several rows and columns. Within one of these columns I have added a container (a <DIV> tag) holding a Google map. Here is the issue:
The map does not properly show up within the container when the content panel is extended. It appears to be shifted to the left, not centered as it should be. Therefore, any attempt to place a point mark on the map (centering the map over that point mark) is unsuccessful since the map doesn't show properly in the container so the point mark is not visible. Even if I drag the map with the mouse within the container, it always reposition at a bad location. If I comment out the extender, leaving the panel as is, the maps shows properly within its container. It is the collapsible panel extender which makes the layout to be incorrect.
I have created a backend that allows me to update my site content. I am using fckeditor to pull the data from my table in the database. The problem I am having is this: i need to create paging of content so that when the height restriction is met a next btn or numbering system displays to allow the user to click to the next page of content.
View 3 RepliesI have a usercontrol which has a combobox inside it.
This UserControl is the inside an asp panel - and when the panel is visible, the dropdownlist within the control binds to its datasource and behaves itself.
When the panel visibility is set to false, the dropdownlist within the usercontrol is empty.
I have a button within a TabPanel and i have a button click function written in Jquery that is not executing when i click the button. If i remove the tab panel and container it works, but i would like to use the tab panel/container functionality. See code below:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
[code]...
I have set Private Memory limit of 200mb in IIS 7 for an application pool. The Private Working Set memory(Task Manager) for the application is always below 125mb but the number of page faults have increased a lot and application cache is getting cleared frequently after setting the limit.
I haven't set any limit on Virtual Memory.why the cache is getting cleared even when the Private memory used is below the allocated memory?
I am trying to use tab control with Ajax toolkit. I want to use my master page which is plain page and I want to show the tab function of gridview. I want to give the tab control only the gridview page partically on master page. If it is possible, I am going to put other gridview at this page. That means tab control ONLY gridview. Is it possible?
[Code]....
I have a tab container on a web page, in which several panels are loaded with heavy peice of data, what i do, i only load the defualt tab data on page load, and the rest of data(i.e data in other tabs) loads behind the screen(i.e using asynchronous request), just to speed up page rendering. now when the page completely rendered(with only default tab data) the load event of javascript fires and it start populating data into other tabs, in this situation when i click any other tab immediately after rendering, it shows the half rendered panel(i.e the data is rendering in panel or the back process is running), which looks awkward sometimes.
So i need to stop the click of any tab until the data into that panel(or in all the panels) fully rendered, by displaying a wait or progress bar image, and then opens up that panel. i need whenever user click on a tab, a wait image should display on the tab header until the panel fully rendered, and then panel will opens up, none of the panel displays half or no data.
I'm new to ASP.NET, and I'm self-taught. I suspect that's the cause of my problem, but here goes. I'm using .NET 3.5 and have installed the toolkit. I want to add a Tab Container to an AJAX Webform. When I drag the control from the toolbox to the Webform, nothing happens. I saw that someone was having this problem with extenders, but I don't believe the Tab Container is an extender. If I'm wrong, let me know, but shouldn't I be able to place the tab container directly on the webform?
View 5 RepliesI have two tab panel for a tab container. And I have some button that perform some function in tab 1. But when I click any button in tab 1. After finished the function, it will automatically change to tab 2. What's wrong with my code? My code is as follows:
<%@ Page Language="C#" AutoEventWireup="true" MasterPageFile="~/MasterPage.master" CodeFile="Testing.aspx.cs" Inherits="Testing" %>
<asp:content ID="content" ContentPlaceHolderID="MainContent" runat="server">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" [URL]
<html>
<head >
<title></title>
</head>
<body>
<form id="form1" >
<div>
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<ajaxToolkit:TabContainer ID="TabContainer1" runat="server" ActiveTabIndex="1">
<ajaxToolkit:TabPanel runat="server" HeaderText="Search by Date" ID="TabPanel1">
<ContentTemplate>
<div>
<asp:Panel ID="Panel1" runat="server" Height="171px">
<asp:GridView ID="grdHeading" runat="server" AutoGenerateColumns="False"
onselectedindexchanged="grdHeading_SelectedIndexChanged">
<Columns>
<asp:BoundField DataField="courseID" HeaderText="Course ID"
SortExpression="courseID" />
<asp:BoundField DataField="courseName" HeaderText="Course Name" ReadOnly="True"
SortExpression="courseName" />
<asp:CommandField ButtonType="Button" ShowSelectButton="True" />
</Columns>
</asp:GridView>
<br />
<br />
</asp:Panel>
</div>
<br />
<br />
<br />
<br />.........................
I am using the ajax control toolkit - Tabcontainer. I wonder how to refresh the latest data inside the tab. For example, I have two tab. The first tab is a add form. After I add the form, I prompt out a successful message. Then I click on the second tab which is my gridview listing of the inserted record. But when I click on the second tab, it seem not binding the gridview to show the most latest record I have inserted.
View 2 RepliesI need to change the order of some tabs in a tab control, how can achieve this?
View 4 RepliesI have a web page with two tabs, "Release Inventory" and "Recreate Pull Sheet". I am using a tab container and tab panels. It looks fine in the design view but as soon as I view it in a brower the tabs don't show up. All I see is the Header text for the tabs. It looks like this:
"Release InventoryRecreate Pull Sheet"
You can click "Release Inventory" or "Recreate Pull Shee" and you will see the information in the tabs, but the actual tab appearance is not showing up.
Here is my code:
[Code]....
What am I missing here; this should be straight forward, but when I attempt to access the "get_activeTabIndex()" method on my Tab Container's ID, I get the following error:
"Object doesn't support this property or method"
This is using VS.NET 2010 with the AJAX Control Toolkit built for Framework 4, but I don't think anything was deprecated so this should not be an issue. I extract the ID of the control using serverside script variables, then attempt to access the method, but it fails. Take a look:
[Code]....
Value 'tabCtrl' does indeed have value, as I can see it registers as an object (not NULL or Nothing) and ClientID resolves to the following:
ctl00$ContentPlaceHolderMyApp$AJAXTabContainerNumData
in my application i have tab container with several tabs, inside everyone of them
i have textboxes, dropdowllists etc. i want to get those values filled by the user,
how can i do this, the intelisense don't recognize them.
have a tabcontainer, where I put a radio button list having two button. If i select the second radio button then some fieds will not display.Now the problem is I gave the size to the first panel 300px, and I placed all the buttons at the below. Now whenever the fields are not displaying, then a vacant plce is created. If now I change the tab panel height then the buttons are cut away.So can I dynamically incresed the size of the panel?
View 3 RepliesIn my application I am using Tab Container Control. But this Control is not displaying at runtime.Following is the Design Code:
<asp:Panel runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager> [code].....
When work with seadragon control it works fine.but when put seadragon control in tabcontainer it is not displaying.code
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<cc1:TabContainer Visible="true" lefr-margin="200px" Width="1000px"
[code]....
I am trying to find a textbox control within the tabpanel of a tab container of the source page. I have been searching the forums but have been unable to find the right example. Can someone help me or point me in the right direction. The source page is as follows:
[Code]...
does anyone happen to know how to access controls such as textboxes on tab containers?
View 4 RepliesWhat is the best way of limit the size of an Accordion Pane when it contains a lot of data? I have an Accordion defined in the ASP which I'm building dynamically in the code behind,at present I'm just adding Literals to the pane (basically records from the db) The data I'm using generates four panes which contain 86, 4, 500 & 132 rows each. I was wondering if it's feasible to limit the rows being displayed by the Accordion Pane when the rows are greater than 20 but below that number have the size set to auto?
[Code]....
