I have an ajax tab container in an aspx page. Earlier I had 2 tab panels in the tab cotnainer. Now I want to add third tab panel. I could add the third panel but I am able to access the third panel, i.e. When I click on third panel, the panel is not shown(I didnt even get the handy cursor when i place the cursor on the third tab panel name).
View 1 RepliesI have a Tab Container in my page and it has 6 tab inside,when i try to add 7th tab and add inside that a TextBox It Shows me nothing.,
I can't see my textbox inside 7th panel .All i see is its header.It sounds weird to me.why is that?!!!!
P.S: i have no problem with other tabs!!!!!
I have a problem doing a partial page post back with an update panel within a tab container.
I am adding the control programmatically as follows
[Code]....
The controls are added to the tab container but the button now causes a full page postback. The button_click event is no longer called. Is there something I am missing here.
I have a ajax tab container that has a gridview inside one of the tab panels. I set the width of the grid view to less than the width of the tab container, but the gridview is not inside the tab panel. It goes outside the tab panel lines. How do I keep it inside the tab panel and have the horizontal and vertical scrolls bars for when it is larger than the tab panel?
View 3 RepliesThis is the question, how to open a modalPopup from a Asp:Link button inside a Tab panel?
Runtime error is Asp:Link ID not found, and thats because its in Tab Control, whats the work around?
I have implemented a collapsible panel which works properly. It collapse and it extends the content panel when the link corresponding to the information panel is clicked. Within the content panel I have an HTML table control containing several rows and columns. Within one of these columns I have added a container (a <DIV> tag) holding a Google map. Here is the issue:
The map does not properly show up within the container when the content panel is extended. It appears to be shifted to the left, not centered as it should be. Therefore, any attempt to place a point mark on the map (centering the map over that point mark) is unsuccessful since the map doesn't show properly in the container so the point mark is not visible. Even if I drag the map with the mouse within the container, it always reposition at a bad location. If I comment out the extender, leaving the panel as is, the maps shows properly within its container. It is the collapsible panel extender which makes the layout to be incorrect.
I have a usercontrol which has a combobox inside it.
This UserControl is the inside an asp panel - and when the panel is visible, the dropdownlist within the control binds to its datasource and behaves itself.
When the panel visibility is set to false, the dropdownlist within the usercontrol is empty.
I am using master page, and there is an image on top
<div
id="header"><a
href="http://www.google.com"><img
src="image.jpg"
alt="abc"
style
="border :0px; height :80px;"
/></a></div>
There is content page where I have grid, when I click on it, I am displaying modal popup. Everything works fine. The only problem is: I have close button on top of the modal popup window. If modal displays on top of the image, and if I click on close button, then close button event will not fire, insted it redirect to google.com. All other controls besides image are not accessible. If image is not behind of modal (if I scroll down the page), then close button event works fine.
I have a button within a TabPanel and i have a button click function written in Jquery that is not executing when i click the button. If i remove the tab panel and container it works, but i would like to use the tab panel/container functionality. See code below:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
[code]...
I am trying to use tab control with Ajax toolkit. I want to use my master page which is plain page and I want to show the tab function of gridview. I want to give the tab control only the gridview page partically on master page. If it is possible, I am going to put other gridview at this page. That means tab control ONLY gridview. Is it possible?
[Code]....
After much research, no solution can be found to do what I want by combining these two controls. Currently, I have a repeater control which, in page_load, takes the querystring and queries the database accordingly, puts the resulst in a datatable, and binds the datatable to the repeater. Everything works fine, no problem there. It's just that I have many columns coming from the query and there are many rows as well. So, I thought it would be easier to incorporate the accordion, so that the header of each accordion pane would show some unique fields (name, whatever...) as the header, and the rest of the many fields in the content. This way, there would be many closed accordion panes showing the name from the row returned. If the pane is clicked, the pane would open and show the rest of the results.
The problems I've had are that the repeater is not accessible from the code behind if it is inside the accordion. But I'm sure I wasn't doing it right anyways. I'm just trying to have an accordion that has as many panes as there are results from a datasource. If there is something other than a repeater that you can suggest, or the correct way to incorporate the repeater in the accordion to do what I want, suggest whatever! I just need to format how the results display how I want, unlike a gridview (I used tables in my normal repeater, and that worked fine, I just need to get that repeater to work inside of the accordion).
(and I know this isn't the section to ask about the accordion, but what is the AccordionExtender? It's not in the toolbox, and I can't find much online. It won't be recognized by Visual Studio, so I don't know what to do. If I could get that, I feel like it could solve my problem, as I found a possible solution online) I don't need to post my code, as it's a simple repeater, and trying to integrate it within the accordion isn't working no matter which way I try since I can't DataBind() in the codebehind. And yes, I tried to FindControl within the accordion but it wouldn't find the repeater.
I have a tab container on a web page, in which several panels are loaded with heavy peice of data, what i do, i only load the defualt tab data on page load, and the rest of data(i.e data in other tabs) loads behind the screen(i.e using asynchronous request), just to speed up page rendering. now when the page completely rendered(with only default tab data) the load event of javascript fires and it start populating data into other tabs, in this situation when i click any other tab immediately after rendering, it shows the half rendered panel(i.e the data is rendering in panel or the back process is running), which looks awkward sometimes.
So i need to stop the click of any tab until the data into that panel(or in all the panels) fully rendered, by displaying a wait or progress bar image, and then opens up that panel. i need whenever user click on a tab, a wait image should display on the tab header until the panel fully rendered, and then panel will opens up, none of the panel displays half or no data.
I'm new to ASP.NET, and I'm self-taught. I suspect that's the cause of my problem, but here goes. I'm using .NET 3.5 and have installed the toolkit. I want to add a Tab Container to an AJAX Webform. When I drag the control from the toolbox to the Webform, nothing happens. I saw that someone was having this problem with extenders, but I don't believe the Tab Container is an extender. If I'm wrong, let me know, but shouldn't I be able to place the tab container directly on the webform?
View 5 RepliesI have two tab panel for a tab container. And I have some button that perform some function in tab 1. But when I click any button in tab 1. After finished the function, it will automatically change to tab 2. What's wrong with my code? My code is as follows:
<%@ Page Language="C#" AutoEventWireup="true" MasterPageFile="~/MasterPage.master" CodeFile="Testing.aspx.cs" Inherits="Testing" %>
<asp:content ID="content" ContentPlaceHolderID="MainContent" runat="server">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" [URL]
<html>
<head >
<title></title>
</head>
<body>
<form id="form1" >
<div>
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<ajaxToolkit:TabContainer ID="TabContainer1" runat="server" ActiveTabIndex="1">
<ajaxToolkit:TabPanel runat="server" HeaderText="Search by Date" ID="TabPanel1">
<ContentTemplate>
<div>
<asp:Panel ID="Panel1" runat="server" Height="171px">
<asp:GridView ID="grdHeading" runat="server" AutoGenerateColumns="False"
onselectedindexchanged="grdHeading_SelectedIndexChanged">
<Columns>
<asp:BoundField DataField="courseID" HeaderText="Course ID"
SortExpression="courseID" />
<asp:BoundField DataField="courseName" HeaderText="Course Name" ReadOnly="True"
SortExpression="courseName" />
<asp:CommandField ButtonType="Button" ShowSelectButton="True" />
</Columns>
</asp:GridView>
<br />
<br />
</asp:Panel>
</div>
<br />
<br />
<br />
<br />.........................
I am using the ajax control toolkit - Tabcontainer. I wonder how to refresh the latest data inside the tab. For example, I have two tab. The first tab is a add form. After I add the form, I prompt out a successful message. Then I click on the second tab which is my gridview listing of the inserted record. But when I click on the second tab, it seem not binding the gridview to show the most latest record I have inserted.
View 2 RepliesI need to change the order of some tabs in a tab control, how can achieve this?
View 4 RepliesI have a web page with two tabs, "Release Inventory" and "Recreate Pull Sheet". I am using a tab container and tab panels. It looks fine in the design view but as soon as I view it in a brower the tabs don't show up. All I see is the Header text for the tabs. It looks like this:
"Release InventoryRecreate Pull Sheet"
You can click "Release Inventory" or "Recreate Pull Shee" and you will see the information in the tabs, but the actual tab appearance is not showing up.
Here is my code:
[Code]....
What am I missing here; this should be straight forward, but when I attempt to access the "get_activeTabIndex()" method on my Tab Container's ID, I get the following error:
"Object doesn't support this property or method"
This is using VS.NET 2010 with the AJAX Control Toolkit built for Framework 4, but I don't think anything was deprecated so this should not be an issue. I extract the ID of the control using serverside script variables, then attempt to access the method, but it fails. Take a look:
[Code]....
Value 'tabCtrl' does indeed have value, as I can see it registers as an object (not NULL or Nothing) and ClientID resolves to the following:
ctl00$ContentPlaceHolderMyApp$AJAXTabContainerNumData
in my application i have tab container with several tabs, inside everyone of them
i have textboxes, dropdowllists etc. i want to get those values filled by the user,
how can i do this, the intelisense don't recognize them.
have a tabcontainer, where I put a radio button list having two button. If i select the second radio button then some fieds will not display.Now the problem is I gave the size to the first panel 300px, and I placed all the buttons at the below. Now whenever the fields are not displaying, then a vacant plce is created. If now I change the tab panel height then the buttons are cut away.So can I dynamically incresed the size of the panel?
View 3 RepliesIn my application I am using Tab Container Control. But this Control is not displaying at runtime.Following is the Design Code:
<asp:Panel runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager> [code].....
When work with seadragon control it works fine.but when put seadragon control in tabcontainer it is not displaying.code
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<cc1:TabContainer Visible="true" lefr-margin="200px" Width="1000px"
[code]....
I am trying to find a textbox control within the tabpanel of a tab container of the source page. I have been searching the forums but have been unable to find the right example. Can someone help me or point me in the right direction. The source page is as follows:
[Code]...
does anyone happen to know how to access controls such as textboxes on tab containers?
View 4 Replies I am using the ajax control toolkit tabcontainer with 5 tab panels inside of it. Each tab contains areas where one must input information. The page also contains add, edit, and delete buttons with gridviews above them. What I am trying to do is to make the user save or cancel changes when they change the activetab. I am using a javascript confirm box but I need to try to retrieve the value of what is pressed from the javascript box to decide whether to discard the changes or stay on the page and make the user finish the input. Is there any way to save the value from the javascript box into a variable so or must i try something else?
PS I wasnt sure whether to post this in the javascript section or the asp.net section since im using asp.net with c#.This is kinda what im using but would like to turn it into a confirm box and pull the true or false value.
protected void TabContainerContent_ActiveTabChanged(object sender, EventArgs e)
{
if (TabContainerContent.ActiveTabIndex != 0)
[code]....