AJAX :: UpdatePanel AsyncPostBackTrigger And Gridview Not Updating?
Mar 8, 2011
I have a very simple application that works almost all the time. I am using an UpdatePanel. My script manager is configured to enable partial rendering. My UpdatePanel is configured for conditional update mode. My asynchronous trigger is a timer that runs every 3 seconds. I track unhandled exceptions in the database. I am not getting any unhandled exceptions. Nor am I getting managed exceptions. Now, I had two users side by side running the application today. I had one record in the data queue. The first user did not get updates; her grid did not update. The second user did get updates. The only difference was that the first user was logged in for a long period of time. The second user logged in just before the test. I reviewed the IIS log file and both users were polling the page every 3 seconds for the same data. So why didn't the first user's grid update? The code follows.
I have a TabContainer with a few TabPanels. Inside the first TabPanel there is a GridView that have a LinkButton called "Subject".
Now when this "Subject" is clicked I want to change the TabIndex to another TabPanel so I have created a clickevent for this below.
I want to change TabIndex using an UpdatePanel to not have to do a fullpage postback.
So I need to put the "Subject" in the AsyncPostBackTrigger but it says it cant find the control so I wonder how I would do this for this LinkButton "Subject" ?
I have an update panel that has a timer set as the AsyncPostBackTrigger.In this Update Panel I have a repeater and in the repeater I have a few buttons which have on click events.The on click of these buttons does not appear to fire until the timer has tickedI have tried debugging and this is what seems to be happening, either way it takes ages for the button click to actually fire.
I have a couple of dropdowns inside an Ajax Update Panel. When I try to rebind the controls or set the selected index of the drodowns inside the panel, they don't respond.
For example, I update the database records and need the dropdowns to display updated data. I set the data source for the dropdowns, rebind them and update the UpdatePanel, but it still shows the old data.
this is my first post in this forum, even though I often search for helps and clarifications over its threads. And many times they are definitely useful!!I had a <asp:ScriptManager> in may MasterPage, wich was used to manage various UpdatePanels I have either in Content pages or in MasterPage.Today I inserted a CalendarExtender, so I had to replace the ScriptManeger with the AJAX ToolkitScriptManager.
At the beginning it seemed to work fine (the calendar pop up and others controls got updated properly). Then I noticed that the nodes in various TreeView are not expanding any more. The TreeViews objects are placed inside an UpdatePanel, in order to expand each node without refreshing the whole content page. And, while a node expands, an UpdatePanel containing a GridView in the content page gets updated.Now, with the new ScriptManager they do not expand, but when clicking on a single node the GridView is updated properly.Here some pieces of code:
[Code]....
Controls registered as triggers.I know I can use only one script manager per page,
I am creating a web part, which is loading an ASCX file. This ASCX contains an Updatepanel and linkbutton inside the update panel.
When i click on the link button for the first time, there is a request going to the server, but the UI is not getting updated. and if you click on it for teh second time, there is not even the request going to the server.
I tried using a button also, but there was no luck, the results were same, first time request fires, but the UI is not updated. and the second time even the request is not fired.
I have put the code for both below. i am using Sharepoint 2007 and My master page contains a Script manager as well.
I have an updatepanel with a radiobuttonlist, which looks like this in my markup code:(also, I tried specifying the AsyncPostBackTrigger with the specific eventname "OnSelectedIndexChanged" - no succes either).
[Code]....
In code behind, loads of things happends. But the primary important thing is this method which is being called:
[Code]....
Now, in each postback this is set as a datasource (it is not loosing its datasource because of some timer).What my problem is: Even though the Page_Load event is being fired and I can see the datasource has changed, the content I see in the radiobuttonlist stays the same!
I develop an ASP.NET web application. The server side receives a stream of image data (JPEG frames as byte arrays).
It should processes them and send the images to the client side periodically.
For displaying these images on the client side I tried to use an approach similar to this described in the post "Improve your Image(s)" (http://steveorr.net/articles ImproveYourImages.aspx) by using an auxiliary ASP.NET page for the purposes of the server side image processing.
When I used a client side button to request the image ocntrol (imgCameraCapture) update with its URL pointing to the processing page (GenImage.aspx, as in the above post), everything worked fine (with exception of the whole page re-rendering on each button event). The image was updated.
For a periodic update of the client image control on the main page I put in an ASP.NET AJAX UpdatePanel andset it to update conditionally by triggering to an ASP.Net AJAX timer (10 seconds) event in order to achieve a partial page update (just the image).
II used the timer tick event handler to update the image by invoking the separate ASP.NET image data processing page there as in the button click event handler. But in the timer tick event handler the processing page was not invoked and the image was not updated.
This is the C# code behind executed in the button clik and timer tick event handlers:
I either don't understand or I'm not using AJAX right. I'm running a long report. I'd like to have a label to show the user that the "Report Running", then, that the report has finished. But, when the user runs another report, I'd like to have the label that shows "Report Finished!" to clear so that you don't have "Report Running!" and "Report Finished!" on the screen at the same time. But, the label will not clear???? I get both lables showing. What am I doing wrong?
I have webpage and a master page.In master page I defined a Label and ContentPlaceHolder :
[Code]....
In my webpage I have an updatepanel and a button that updates the Label.[Code]....
[Code]....
If the button is inside updapanel, nothing happens when I click the button (Label is not displayed), but if I move button outside the panel it works. (Button must be inside updatepanel and ofcourse no PostBackTrigger)
I'm using ASP.Net 2008 and C# and Ajax. I have wired up my ajax updatepanel to update the buttons within them in the gridview control's RowCommand event. However, at the end of this event, I call the Response.Redirect(commandArgs[2]); to open either Word or Adobe docs that user selected. And this line of code stops my Ajax updatepnael to update my 2 buttons' enabled properties. I thought maybe there is another way to open docs that won't interfer with my Ajax updatepanel and what will that be?
GOAL: on a web page (vb.net) content in a placeholder will refresh with a different .ascx (user control) every 30 seconds (rotating 3 in total) and of course i dont want to refresh the whole page, just the placeholder.
I'm new at AJAX (that's my first problem - lol)
I set the timer up to call a function, but not sure how to go about refreshing the placeholder with a different ascx file. I'm sure i'll be using UpdatePanel to do this, but haven't been able to figure this out. Easy to replace a value in a label using AsyncPostBack trigger, but nothing on how to achieve this.
Problem is the lblname1, lblphone1 and lblemail1 do not update on the page with the new values, if I step into the routine I can see the values and a success asssignments but on the page I get NO values. I removed from code the updatepanel and I get the values on page.I also tried conditional updatemode with no success but again I get NO values.
I have a radiobuttonlist control in an AJAX tabpanel, which I would like not to postback whenever the selected item is changed. But I do want to modify the text in a textbox, that is within a separate updatepanel, to be the text of the new selected item.
I have a asp.net listbox server control that is connected to a jquery plugin that can handle a client side click event for each of the checkboxes it renders.
Whenever I click on a checkbox the click event gets triggered and I make a call to
__doPostBack("UpdatePanel1", ""); so that i can update the updatepanel and rebind the checkboxlist inside it.
is it possible to do the rebind first, and then update the updatepanel? how do i do that? because now, the rebind happens on the second time i click on the checkbox.
I have a gridview in one UpdatePanel and a FormView in another UpdatePanel.
The FormView UpdatePanel refresh is triggered when the GridView SelectedIndexChanged event fires. This then displays the FormView. However when a user navigates to another page in the GridView or sorts the data then the GridView is refreshed and the SelectedIndex is changed to nothing in the code behind via the GridView DataBinding event.
The FormView UpdatePanel does not refresh to reflect this. I have to manually set the FormView datasource to null and update the FormView UpdatePanel in the code behind.
My question is why doesn't my FormView UpdatePanel update when the SelectedIndex of the GridView is altered in the code behind.
I have a list of news summary in a repeater control and I want to show the detailed news in a Modal Popup without post back. review the steps I am doing to achive this functionality:
I have list of News Summary on my page in a repeater control, bind with SQL database.
I have a page that has a updatepanel around a gridview control that is within my modalpopup. So you land on the page, there is a link that when clicked will open the model popup. Initially the gridview merely displayed saved records you personally choseto save, well when you selected one, the popup would close and the data from that row would be passed to the gridview within the page to display details.. no issue when it was setup that way.. well eventually it was decided to add a delete option within themodal popup gridview so now when viewing the records you can delete it if not needed. works well.. but now with the updatepanel surrounding the gridview when i click on my "select" link it doesnt execute my
my page is using an UpdatePanel to do some ajax function after a button click. So here is what I got.
I have a textbox and a button.. The button clicks and the animation fires... But i dont want that, I want to validate the textbox and if everything is ok then fires Animation. Here is the code. My question is how can I fire this animation after all validations are ok?
I have an ASP.NET Label on my form, which is wrapped in an UpdatePanel. The UpdatePanel has two AsyncPostbackTriggers which reference two DropDownList controls. Based on the combination of selected items in both DropDownLists, I'm updating the Label. I also have a FilteredTextBoxExtender referencing an ASP.NET TextBox that's, by default, only allowing numbers. Now, along with updating the Label based on the combination of selected items from both DropDownLists, I'm also changing the FilteredTextBoxExtender's FilterType to Custom | Numbers and ValidChar to a hyphen, to allow both numbers and a hyphen (for phone numbers). Remember that I have both DropDownLists as AsyncPostbackTriggers for the UpdatePanel. This works perfectly fine doing a regular postback, but if I add those two DropDownLists as AsyncPostbackTriggers, the FilteredTextBoxExtender is not working properly based on the FilterType and ValidChar properties. It only allows just Numbers, which is the default. Is there anyway around this without having to do a regular full postback?
