I have a user control 'UserControl1'.
Which is in update panel of ajax.
Now i want to use trigger in update panel.
Then what should i write in eventname of trigger
<Triggers>
<asp:AsyncPostBackTrigger controlid=" UserControl1 " eventname="????" />
</Triggers>
I have a very simple application that works almost all the time. I am using an UpdatePanel. My script manager is configured to enable partial rendering. My UpdatePanel is configured for conditional update mode. My asynchronous trigger is a timer that runs every 3 seconds. I track unhandled exceptions in the database. I am not getting any unhandled exceptions. Nor am I getting managed exceptions. Now, I had two users side by side running the application today. I had one record in the data queue. The first user did not get updates; her grid did not update. The second user did get updates. The only difference was that the first user was logged in for a long period of time. The second user logged in just before the test. I reviewed the IIS log file and both users were polling the page every 3 seconds for the same data. So why didn't the first user's grid update? The code follows.
<asp:ScriptManager ID="ScriptManager1" runat="server" AsyncPostBackTimeout="30" EnablePartialRendering="true"></asp:ScriptManager>
[Code]....
In my code behind I have the following timer logic. [Code]....
I'm using context menu control
[URL]
<asp:UpdatePanel ID="updateVisor" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<cc2:UIControlMenuContextual ID="menuVisor" runat="server" Width="200px" ForeColor="Black"
AutoHide="False" OnItemCommand="menuVisor_ItemCommand">
<cc2:ContextMenuItem CommandName="poner" meta:resourcekey="mc_poner"/>
<cc2:ContextMenuItem CommandName="sacar" meta:resourcekey="mc_sacar"/>
[code]....
I have an ASP.NET page with the following controls on it.
<asp:UpdatePanel ID="UpdatePanel3" UpdateMode="Conditional" runat="server">
ScriptManager exist in MasterPage. I registered trigger by timer.I want to update color of rectangle in Map.aspx. but It is not update. If use Label instead of Image Control, update is done. - structureDefault.aspx have table. table have cell. cell have usercontrol. usercontrol have updatepanel.updatepanel have image control. image control have Draw.aspx in ImageUrl.- Code Sample1. MasterPage behind Code
protected void Page_Load(object sender, EventArgs e) { ToolkitScriptManager1.RegisterAsyncPostBackControl(Timer1); }
protected void Page_Load(object sender, EventArgs e)
[code]...
I have an update panel that has a timer set as the AsyncPostBackTrigger.In this Update Panel I have a repeater and in the repeater I have a few buttons which have on click events.The on click of these buttons does not appear to fire until the timer has tickedI have tried debugging and this is what seems to be happening, either way it takes ages for the button click to actually fire.
View 3 RepliesIn my web page, i have user control inside update panel, user control refreshed every time update by update panel.
View 3 Repliesmy problem is it that i when loaded usercontrol in Updatepanel dynamically,so can not execute javascript or jquery code in second usercontrol.
"EconomicBongah.ascx" UserControl work correctly, because that this usercontrol loaded in Page_Load Event for the first time.
when i click on the btn_Article,"EconomicArticleMarket.ascx" UserControl Get loaded, but with the first user control code will interfere,and therefor Javascript or jquery code in second usercontrol can not execute, and encounter with error in Jquery-1.4.4.js file.
i loaded usercontrol dynamically in this case:
[Code]....
Using ASP.NET 3.5 / C#. Have a page with a UpdatePanel, and a UserControl inside the UpdatePanel. When calling ScriptManager.RegisterClientScriptBlock(this, typeof(UpdatePanel), Guid.NewGuid().ToString(), script, false); the script appears to fire (have tried it with a JS alert), but the resulting script also disappears immediately afterword. I am trying to create a JS function via the script, and it is not in the Page Source after the Page is rendered. i have tried many variationsRegisterClientScriptBlock with no luck.
View 8 RepliesI've a ASP.Net page (Default.aspx) which will load UserControl (ucontrol.ascx) dynamically into an UpdatePanel. By using UpdatePanel, we believe we're able to prevent the entire page to be posted-back.
My problem is, within the UserControl, we have some form controls, such as inputs and buttons; after the UserControl is loaded, clicking on any button inside the UserControl will cause the UpdatePanel to be blanked. During the investigation, I found that, breakpoints within the Button1_Click() in the code-behind for the UserControl is never reached. Please reference to the code below, this references to [REFERENCE]1.
[code]....
I have a UserControl that is Added dynamicatlly into the page using UpdatePanel. That user control has an extender that does not work.
View 4 RepliesI have a list of news summary in a repeater control and I want to show the detailed news in a Modal Popup without post back. review the steps I am doing to achive this functionality:
I have list of News Summary on my page in a repeater control, bind with SQL database.
[code]....
I have a user control with both an UpdatePanel and a ScriptManager.
Some pages in the system have a ScriptManager of their own, and need to include the UserControl.
This throws the "You can only have 1 ScriptManager" exception.
If I remove UserControl's ScriptManager, I'll get 'UpdatePanel1 requires a Script Manager" exception.
I've tried to modify the UserControl to dynamically include it's own script manager if none exists. But all the methods I've used before involve adding a delegate to Page.OnInit-- which won't work, since the UserControl Init fires first.
Because the system designers here like making my life difficult, I can't create a MasterPage, or a BasePage for the system in inherit off of. I'd be stuck going to each page an adding a ScriptManager before the UserControl on each of them. Is there any way of, in the UserControl, detecting if the page has a ScriptManager, and if not, adding it dynamically in a way that makes the UpdatePanel happy?
my page is using an UpdatePanel to do some ajax function after a button click. So here is what I got.
I have a textbox and a button.. The button clicks and the animation fires... But i dont want that, I want to validate the textbox and if everything is ok then fires Animation. Here is the code. My question is how can I fire this animation after all validations are ok?
[Code]....
I have an ASP.NET Label on my form, which is wrapped in an UpdatePanel. The UpdatePanel has two AsyncPostbackTriggers which reference two DropDownList controls. Based on the combination of selected items in both DropDownLists, I'm updating the Label. I also have a FilteredTextBoxExtender referencing an ASP.NET TextBox that's, by default, only allowing numbers. Now, along with updating the Label based on the combination of selected items from both DropDownLists, I'm also changing the FilteredTextBoxExtender's FilterType to Custom | Numbers and ValidChar to a hyphen, to allow both numbers and a hyphen (for phone numbers). Remember that I have both DropDownLists as AsyncPostbackTriggers for the UpdatePanel. This works perfectly fine doing a regular postback, but if I add those two DropDownLists as AsyncPostbackTriggers, the FilteredTextBoxExtender is not working properly based on the FilterType and ValidChar properties. It only allows just Numbers, which is the default. Is there anyway around this without having to do a regular full postback?
View 3 RepliesI'm dynamically creating image buttons and want their click event to update an image in the update panel where only the panel updates- not the whole page.
I have created the image buttons click event and got it so that it updates the image in the update panel, but I can't seem to create the triggers- I keep getting the error 'Multiple Controls with the same ID' and I can't understand why.
Here's my code:
[Code]....
I am converting an old payment page from classic ASP to ASP.NET. The page includes three radio button options (credit card, purchase order, bill me). The old page uses javascript to enable/disable the appropriate input fields depending on which payment option is selected. For example, if the payment selection is changed from "credit card" to "purchase order", the credit card fields are disabled, and the PO number field is enabled.
I want to mimick this behavior using ASP.NET + server-side AJAX, so I created RadioButtonList for the payment options, and put all the data input controls (credit card number, purchase order number, etc.) within an UpdatePanel. The UpdatePanel has an AsyncPostBackTrigger with ControlID set to the RadioButtonList, and an EventName specified which tries to enable/disable the appropriate input fields depending on which payment option is selected. This doesn't seem to work because changing the radio button selection doesn't seem to fire this trigger.
Is it possble to utilize AsyncPostBackTrigger with a RadioButtonList control? If not can you suggest a way to handle this scenario for dynamically enabling/disabling form inputs?
I want to try and use an updatepanel. So I have surrounded this code with an updatepanel.
Now I need to put "LinkButton57" as AsyncPostBackTrigger. It seems that I cant put that in the HTML code in the Trigger tags as the updatepanel only searches for parenting controls.
This LinkButton57 is located deeper in the control hiearchy as you can see here. So I am trying to put this programatically in the Page_Load event.
Now if I run the below code, I get this exception(Object reference not set to an instance of an object) and wonder if I could be thinking right here and just miss some details perheps? Will be happy for answer.
[Code]....
AsyncPostBackTrigger doesn't work on server?
View 4 RepliesIn updatepanel we can use triggers with two methods AsyncPostBackTrigger and PostBackTrigger so I want to know what is different between these two as well how can we decide we need to go for which one.
View 3 RepliesI have a TabContainer with a few TabPanels. Inside the first TabPanel there is a GridView that have a LinkButton called "Subject".
Now when this "Subject" is clicked I want to change the TabIndex to another TabPanel so I have created a clickevent for this below.
I want to change TabIndex using an UpdatePanel to not have to do a fullpage postback.
So I need to put the "Subject" in the AsyncPostBackTrigger but it says it cant find the control so I wonder how I would do this for this LinkButton "Subject" ?
[Code]....
have update panel that content check box, textbox, 3 DropDownList with CascadingDropDown extender. When I checked the checked box it should do a AsyncPostBackTrigger and it is working ok but the problem that if I select any thing from DropDownLists then check the box it would clear the DropDownLists after doing AsyncPostBackTrigger for the the check box.
any advice how to separate these controls inside update panel for doing AsyncPostBackTrigger??
I have a page with an UpdatePanel with a UserControl in it. That UserControl contains a GridView with a nested UserControl that seems to disappear when the parent UserControl is rebound. I cannot for the life of me figure out why the child UserControl disappears. The code works beautifully on the first load, but any partial postback causes the "Pick" UserControl to disappear.
[Code]....
So I'm trying to dynamically load a usercontrol into a placeholder in another usercontrol inside a updatepanel.
basically I've got this markup:
<asp:UpdatePanel ID="upPopup" runat="server">
<ContentTemplate>
<UC:Popup runat="server" ID="UC_Popup" />
</ContentTemplate>
</asp:UpdatePanel>
And then this markup inside that usercontrol (Popup):
<div id="modal">
<asp:PlaceHolder ID="phPopupPlaceholder" runat="server"></asp:PlaceHolder>
<asp:Label ID="lblModal" runat="server"></asp:Label>
</div>
In the codebehind of the popup usercontrol I have:
public void Show(UserControl control) {
this.phPopupPlaceholder.Controls.Add(control);
this.lblModal.Text = "Loaded";
}
And I call this show method elsewhere with:
Popup.show(new MyUserControl());
Nothing loads into the placeholder though.
But in the show method I can load regular server-controls fine like this:
this.phPopupPlaceholder.Controls.Add(new Label(){ Text = "Label!" });
Can anyone explain to me why regular controls are loaded fine, but my usercontrol isn't loaded?
I'm having few UpdatePanels on my master page. And then, I have RadTreeViewcontrol on the page, that should cause partial postback each time node is clicked. Everything works fine there. Since I'm using the same tree on some other pages, I moved this functionality to UserControl. Stuff I've done before, so no problem. Moved some code to ascx, created some events. Everything always worked for me well. But not now. RadTreeView is nested inside UserControl, and this control on master page with update panels, see below:
<asp:Panel ID="pnlContentWrapper" runat="server" CssClass="ContentWrapper">
<div id="HeaderBreadCrumb">
<asp:ContentPlaceHolder ID="HeaderBreadCrumbContent" runat="server" />
</div>
<div id="HeaderMenu">
<asp:UpdatePanel ID="upnlTreeMenu" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="HeaderMenuContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</div>
<div id="TreeDiv">
<fp:ProductTree ID="treeProductTree" runat="server" />
</div>
<asp:Panel ID="ContentDiv" ClientIDMode="Static" runat="server">
<asp:UpdatePanel ID="upnlTreeContent" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="TreePageContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</asp:Panel>
</asp:Panel>
And the user control is really simple:
<%@ Control Language="vb" AutoEventWireup="false" CodeBehind="ProductTree.ascx.vb"
Inherits="ProductTree" %>
<div>
<telerik:RadTreeView ID="treeProductTree" ClientIDMode="Static" runat="server" EnableDragAndDrop="false"
SkinID="CustomSkin" CssClass="MasterProductTree" DataFieldID="NodeId" DataFieldParentID="NodeParentId"
DataTextField="NodeName" DataValueField="NodeId" />
</div>
And some code behind:
Imports Telerik.Web.UI
Public Class ProductTree
Inherits System.Web.UI.UserControl
Public Event NodeExpand As EventHandler(Of ProductTreeNodeExpandEventArgs)
Public Event SelectedNodeChange As EventHandler
Protected Sub ProductTree_NodeExpand(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeExpand
Dim nodeId As Integer = CInt(e.Node.Value)
Dim evetArgs = New ProductTreeNodeExpandEventArgs(nodeId)
RaiseEvent NodeExpand(Me, evetArgs)
//'some logic
End Sub
Protected Sub ProductTree_OnNodeClick(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeClick
RaiseEvent SelectedNodeChange(Me, New System.EventArgs())
End Sub
End Class
What I don't know is: why is this causing full postback instead of partial? I suspect that it may have something to do with raising my for SelectedNodeChange, but I don't know how to deal with it other way. I need to let other components know, that node selection changed. How can I improve this to make it work with UpdatePanels?