i have used modalpopupextender in my project .. in that i have dropdownlist .problem is that when i want to select any item from the list by arrow keys the control goes from modalpopup to vertical scrollbar of the main screen and whole screen get scrolling when i use up and down arrow key...
i don't want it , i want when i use up and down arrow key the control should be on the modalpopup..
I am quite new to asp.net. I would like to ask for some advice on how this scenario can be achieved. Here is the problem:
I have a 5 gridviews on my page. In each gridview, I have two important columns. They are SellerID and BuyerID. Because I already have too many gridviews on the page, I want to load a webuser control with a modalPopupExtender when either SellerID or BuyerID is clicked. That is to say if a user select a SellerID, the details information about that SellerID should be loaded with DetailView from the user control and if the buyerID is click, the details information about that buyer should be loaded with another detailview
from the user control as well.
My problem is I do not know how to get the Selected Value from the gridView since the DetailView is in the WebUserControl. One more thing, both SellerID and BuyerID are in the same GridView, so how can we distinguish when a user select a SellerID or vice versa.
i made user control which represnt a modal pop up
this is my user control
[Code]....
i want to user this modal popup at many page as user control but i cant treat with show() method of modalpopup
I have a user control that contains a modal popup extender.
I am using the user control inside of a repeater so it could be shown multiple times on a page.
Everything works fine if the repeater only contains one item.
When there are multiple user controls on the page I get the following error:
"Microsoft JScript runtime error: Sys.InvalidOperationException: Two components with the same id 'PosAdjPopup' can't be added to the application."
How do I get my user control to work with the modal popup extender when it will be used multiple times on a page?
Can I keep the modal popup extender in the user control or do I have to put it on my aspx page and trap the event on the button click?
I have three modal popups that are working properly because I test it the controls with simple plain text.
I placed a form view and a datalist in the first two modal popups and everything seems to be okay.
I need to place a user control in the third modal popup but everytime I place the user control I get a javascript error for that particular modal popup.
When I copy paste the same modal popup on a blank page and place the user control inside of the panel then the modal popup works perfectly fine.
I basically copy/paste the same code back where the other two modal popups are then I get the same JavaScript error.
The modal popup crashes first on:
this._popupElement.parentNode.appendChild(this._foregroundElement);
I am using a modal popup control which contains an UpdatePanel. There are one combo and few text boxes and Calendar control in it. When I select any item in combobox, then it's selection change event is fired and there iI set the values of other controls and finally I call update method of update panel. Functionality wise it works properly but it takes a time to update the panel.Here combobox contains around five thousands of items. But when it contains 100s of items it works good.
View 4 Repliesin the following code, value of list box - lstHrs, is not getting recognized on
btnBlock_Click event.
<asp:UpdatePanel ID ="updatepanel1" runat="server">
<ContentTemplate>
<DayPilot:DayPilotCalendar ID="DPCal" runat="server" BusinessEndsHour="22" Days="5"
[code]...
I have a flash on my page and I need to popup an ajax window, I use ModalPopupExtender. The problem is that ajax popup window always shows behind the flash in Internet explorer and Google Chrome. In firefox there are no such problem.
View 6 RepliesI have found a couple of good topics here in the forum and wanted to see any other extra ideas for this control that I am making and trying to implement. So here is the basic information:
The control is going to display a SQL output in a bunch of label controls. The information is going to be coming from a gridview control where the field is going to be hyperlinked.
So I am wanting to set the "TargetControlID" property to the .ascx page load event.
now what I have found is that I can simply run the Popup.show(); function in the .cs file at the end of the page load, but I still have to place a valid control within the TargetControlID property. As you know, the property cannot be "null" and if I put in the control ID for something that is not valid, then it won't work either. So the only thing I can think of is tying it back to the overall control itself. Then I can always change it on the fly if needed, but I think I would not have to since it would fire on the page_load event...
Not sure if this is making any sense... Just understand that have to make this control go across several web pages that are already fully developed. I am just adding this in as new functionality...
This is the question, how to open a modalPopup from a Asp:Link button inside a Tab panel?
Runtime error is Asp:Link ID not found, and thats because its in Tab Control, whats the work around?
I have a page that has a few requirements1. A Gridview that is dynamically populated (and refreshed at a regular interval) with a button control that is conditionally displayed 2. The button control should show a ModalPopup of a Panel that serves as a form 3. This Panel form contains a textbox populated with a value from the gridview and another dropdown control I can get 2 of these 3 requirements via a couple of different approaches (like 1+2 work, but 3 fails or 2 +3 work but 1 fails).The code pasted below is the closest I have gotten, and is actually my preferred method, and I was wondering if anyone could tell me why the ModalPopupTextBox1 is not rendered when ModalPopup button is clicked.If I place the Gridview1 outside of UpdatePanel1 (refresh controlled by Timer1), the ModalPopup Panel works as expectedMarkup: GridUpdate.aspx
[Code]....
Code Behind GridUpdate.aspx.cs
[Code]....
I have a grid view control button (edit mode) that I would like to use with a modal popup message.
The button was originally designed to open a panel with a detailsView control.
So could I grview Button -> modal popup with another panel (click on a ok button here) -> detailsview panel.
Here is the code I tried :
[Code]....
The target control is a Button (ID = "btTest");
The following is in code-behind:
[Code]....
The click has been verified, but the popup does not show. Of course, if btTest is manually clicked, the popup will show without any problem.
Is there any way to show a popup window from code-behind?
i have user control which consists of tree drop down and modal pop up and text box just to view my hirerichal data in tree - drop down list
the problem is when i try to get value from drop down list in debugging mode PROPERTY EVALUATION FAILED Just Appers Execution Stopped.
every thing in request also PROPERTY EVALUATION FAILED
my problem is related with modalpopup control. i made a login control using it.
[Code]....
This works fine. Problem is this. When i click btniptal and then i refresh the page modal shows again. But When i click btngiris and then i refresh the page modal doesn't show. When clicking the btniptal button, the modalpopup should not show.If i make this codes in aspx page everything is ok. But i make this in usercontrol.
I have a modalpopup extender attached to a button. That is to say the button is the targetcontrol id of the modalpopupsxtender. I would still like the onclick event of that button to work because only the onclient click event is working. How can i go about this.
View 1 Replies I have the modal popup come up for searching something. Inside the popup (panel) I have a txtbox and a search button. I enter text and hit 'search' and the results are shown in a listview within the popup. Now every row in the list view has a button "Select". I want to click on one of those buttons to select a particular value.
Now on click of the button(within the listview), I tried calling a javascript function and doing $find('mdlPopup').hide(); , which makes the popup dissappear. But somehow the debugger takes me straight to Global.asax.Application_Error() and doesn't even give me a stack trace to see wht the issue is. And over that, the popup looks dissapeared, but the rest of the controls on the page are not enabled back. Strange?
I'm assuming, that the popup doesn't close as intended and it errored out (which took me to Global.asax.Application_Error() ), and is not enabling the rest of the controls in the page.So my question is, how do I assign multiple buttons in a listview to the okbutton (or cancelbutton) of a modalpopup extender?
I want to use PasswordRecovery control in modalpopup. After successfully completing first step of password recovery.I close the modal popup and now again when i open modal popup it shows with second step of the password recovery. But I want default first step when user close the modal popup.
View 1 RepliesI have a page.. which im trying to implement a gridview that allows you to select from it, it will open a modalpopup with a list of records linked to the selection.. now within that popup, you can pick a individual record so you can see full details..So my question is, can you have multiple modalpopup's open at the same time? If not then is there anyway to reopen the first popup with the list again so that you can pick another record
View 3 RepliesI have been trying over a week to make ModalPopup work. Still can't understand how to do it. Actually, I didn't find a way to use ANYTHING from the Ajax Control Toolkit.I want to put a ModalPopup with the Toolkit 4 in the Log In of this file:
<%@ Master Language="C#" AutoEventWireup="true" CodeBehind="Site.master.cs" Inherits="WebApplication1.SiteMaster" %>
i want to know what is the use RepositionMode property of the modal popup control extender of ajax toolkit control,i know it is enum type what is i want is primary purpus .
View 2 RepliesI'm trying to use ModalPopup Extender but I can't make it to be a true modal control. In my app I'm using asp menu and the menu is always enabeld and active when the ModalPopup is activated. Other controls on the page seem to be disabled (i.e. as expected).
View 2 RepliesWhen I place ASP:RequiredFieldValidator on my ModalPopUp's panel, then why panel is not seen to me.
If I remove Validator on my ModalPopUp's panel then it works alright.
Why?
How to get worked Validators on ModalPopUp?
I have wizard control inside a Modal Popup initiated on a button click.The trouble is the next/previous buttons close the popup.Is there any way to prevent this from happening?Code below.
[Code]....
It works fine with FF where one cannot click any other place except the popup. However, in IE8, the window behind the popup is clickable and selectable as if the popup did not exist.
View 2 Replies