In my gridview I have a dropdown and if the user select [NO], I show a textbox under the dropdown, However, I don't like how it looks, so is there a way to open up a modal using the modalExtender or the jquery thickbox from my dropdown via the code behind?
I'm already using the thickbox on other pages via a button, but can it be done via a dropdown that is embedded within a gridview?
Is there a way to open modelpopup window based on value seleted in dropdown list? I want to open a window when Urgent is selected in the dropdown list=!!!!
here is the code for ModalPopupExtender:
<ajaxToolkit:ModalPopupExtender ID="ModalPopupExtender1" runat="server"
TargetControlID="DropDownList1"
PopupControlID="Panel1"
BackgroundCssClass="modalBackground"
[Code]....
I have a drop down list embedded in a menu panel in my master page. This ddl fetches it's list items from my SQL Server. They are:
1. Select a type --appended during page load
2. Green type -- fetched from SQL server via a datasource
3. Red type -- fetched from SQL server via a datasource
4. User Manual -- appended during page load
For the sake of simplicity my website has 4 pages. When the 'Select a type' list item is selected - the user should be taken to a general 'Introduction' page. When the 'Green type' - the user should be taken to a 'Green' page - and etc.
I had a problem with my site in the past couple days and have almost recovered, but now I'm stuck on some code that has an Auto-Complete feature, which allows a user to type a name of a pub into a TetxBox, and based on the returned names, the user can click one and see that name in the GridView (just below the TextBox). The GridView was set up so that there was an href that the user could click on and that would open a window and the user would see the pub in Google Maps. The code below works just fine for the Auto-Complete and the GridView.
[Code]....
Here is the end of the working code. Somehow I need to use the code below to make
the GridView have a href to allow a user to click and see the pub in Google
Maps:
[Code]....
The code above worked fine before, but I'm not sure how it was incorporated into the GridView, and since I had a problem with my site a few days ago, I haven't been able to figure out this part.I'd sincerely appreciate any help in getting this up and running again.
I would like to find a solution to my problem. In these senario I've got two pages.
First page:
5 dropdowns in updatepanel and a gridview in updatepanel
Second page:
Displays info of the selected row
Problem:
So if a user makes a selections on all dropdownselection and selectes to view a row, wich in this case goes to page2 for more info.
But when the user returns to page1 all the selections and gridview has the "default" values so to speak, and not what the user has selected.
I have a gridview created dynamically from codebehind. How can I add dropDown extender control to 1 sepcific column in gridview (from code behind at runtime). Also how I can show show a animation (busy/fetching data) when user clicks on the dropdown control?
View 1 RepliesI have a Gridview which has x amount of rows. I have an selectIndexChanged method which when a user clicks on the row capture the id of the row and execute a query and populate a table with the data returned from the query. I want this table open in a modalpopupextender once the user click the row in the gridview , I want the selectindexchange method to run n show the modalpopup.
View 7 RepliesThere is a gridview inside of an UpdatePanel.
Some information are shown in Gridview and whenever a button of a particular row is clicked, I open a new window to show print preview.
In order to open a new window I tried to write "Window.Open" using Javascript syntax; however, it didn't executed.
I think AJAX dosen't allow other routins of javascript to be executed.
I m trying to open up a modal pop up dialog with a gridview inside. The problem is there is no pop up opens when i click the button. Here is the code below.Any help would be great.
[Code]....
Is it possible to open a ModalPopupExtender from a HyperLink inside of a GridView??
I have this code:
[Code]....
See this line:
[Code]....
I am trying to open the ModalPopupExtender when this is clicked.. But i get this error:
[URL]
I have a movie embeded of type="application/x-shockwave-flash" and it's not working. Am I doing something wrong? I copied the embeded code and replace the DIV in the ModalPopup example page and it's not working.
View 2 RepliesI have a simple page createuser.aspx
on that page is a custom control userdetails.ascx
[code]....
But is the use of a control if i have to place the methods in every page, might as well copy paste the whole this.
From this i assume that it can be done differently, properly.
I have a text box embedded in a wizard control and I want to use the ajax calender extender to populate the textbox in the wizard, but the extender does not find the text box.
View 3 RepliesI have created an asp.net usercontrol that should list users in a number of applications. For that purpose, the control renders a repeater (foreach application) which in turn renders a gridview (with users for that application).
The control renders fine, except the fact that columns in the gridview are not sortable. Nothing happens (no postback) when clicking the headers. Apparently, no JavaScript is rendered to perform the postback when clicking the header.
This is the code:
[code]....
I have an update panel within it i have my activeX control, below it i have a dropdown that you make a selection from, once you make a selection im trying to pass in different paramters, which really are just the source of the control, since everything else will be the same.. but when i make a selection, the control disappears..
If i remove the update panel and make a selection the control is still visable on the page, at the moment, i dont have much setup, im just trying to get the page layout and framework setup adn working, then i can start plugging in my datasource so actual data is being passed in..
I do have a trigger associated with the updatepanel, but with or without it it still causes the control to disappear..
Just to be clear, it disappearing when i view the page in my browser and make a selection, not within VS. Whats weird is that ONLY that control disappears, the rest of the controls on the page stay visible, the dropdown and buttons.
I have a website that's developed in ASP.NET and uses the AJAX Toolkit (asp:ToolkitScriptManager) for a couple of extenders. The AJAX effects (e.g. ) work perfectly across IE 7, IE8, FF3.5, Safari, and Chrome. However, I embedded my site in a desktop Flex-AdobeAir application using the component which is able to run the entire site including javascript except where the AJAX is used.
I narrowed the source of the problem down to the difference between using asp:ToolkitScriptManager and asp:ScriptManager. Here's an example page that will display "Safari" in the embedded flex browser as the result of document.write(Sys.Browser.name):
<%@ Page Language="C#" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="asp" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">[code]...
However, if you change
<asp:ScriptManager ID="TheScriptManager" runat="server"></asp:ScriptManager>
to
<asp:ToolkitScriptManager ID="TheScriptManager" runat="server"></asp:ToolkitScriptManager>
it suddenly does not display anything on the flex browser.
Is this even possible? I'm trying to pass the DataKeyName (Primary Key) of my master gridview to an embedded child gridview, using a select controlparameter of the SQLDataSource control.
[Code]....
I Have the gridview control with 2 dropdown list and 2 text boxes,When the textbox chnaged event happen 1 row will create and the dropdown back to initial values( its not retaining the selected values),I am binding the control after text changed method,Is there any properties needs to be set or any other way we can retain the values in postbacks?
View 4 RepliesI have a gridview where i have two fields. one is product and second is sub category.
I need to do 2 things.
1. I need to populate the two combos from the database. But depending what is selected in dropdown 1 this will determine what needs to be populated in drop down 2?
how can i achieve this?
In code below, when I have more than one DIV open and I choose to sort one of the GridViews, all the other Open Div's will close automatically. How can i keep the DIV's in the state they are in when I sort any GridView?
[Code]....
I have a data bound Gridview and in its EditItemTemplate I have a drop down list box used to select a technician name. In the OnSelectedIndexChange event I want to update two of the cells in the gridview with the Technician hourly rates. I know that from a database perspective it would be better to keep this data relational but that is not really an option here. I have gotten everything to work with the exception of actually populating the Gridview cells. If possible I would like to do it right in the OnSelectedIndexChange event but I have not been able to reference the cells.
[Code]....
I'm having a problem with using a dropdown to filter the contents of another drop down. The basic idea is:
Dropdown 1 = CountryList (Column1)
Dropdown 2 = StateList (Column2)
I read the contents of a CSV file and populate the gridview. The user then visually verifies that the data is valid and proceeds to upload to the database. To do some testing, i have intentionally changed spellings of country names so they DO NOT match the countrylist which the grid view then flags with a different background indicating bad data. The user then edits the gridview. The Country and state columns then show a drop down control populated with the country list and filtered states list based on countryID.
Here's the ASP.NET ASPX Source for the section of code that is dealing with the gridview
[Code]....
Here's the section of VB Code behind that deals with handling the "RowEditing", specifically the binding of the dropdowns
[Code]....
The proglem is that these dropdowns are ment to easily fix minor errors in data. When i intentionally changed the spelling of "Canada" to Canadaa", this has no corresponding CountryID in the table and the ddlEdtStateID Dropdown's datasource filter does not work. I tried setting the datasource to nothing if a valid CountryID was not there and then i tried to use the SelectedIndexChanged event for the ddlEditCountryID to programmatically set the datasourceID for ddlEditStateID but when i try using CType(FindControl("ddlEdtStateID"), DropDownList) to set the DataSourceID, it does not find the control.
If the Country does not exist, then i just want the stateslist dropdown to say "select a country" but when a valid country is selected, it should display the filtered list for that countryID. Right now, if bad data is entered for the country, then the program crashes when it tries to populate the state drop down. I want it to just say, select a country when the countryID is not valid.
I have a gridview that's inside a .ascx control that's dynamically embedded into another .ascx control, which is then called by a web form. The gridview will initially bind, but when any paging/sorting/command events are then triggered, I can't get any breakpoints inside the events to kick off. Additionally, when I look at the code-behind in the now-blank page, I see the old data sitting there.
what on earth is going on here? For edification, the .ascx page with the control is excerpted.
Parent .ascx control:
[code]...
I'm trying to load a gridview based on selection from dropdownlist. When i run the program, it displays empty gridview. How to solve this?
Name of dropdownlist: CatCode
Code behind:
Private Sub BindProdGrid()
Dim conString As String = ConfigurationManager.ConnectionStrings("SY_InventoryConnectionString").ConnectionString
Dim rowIndex As Integer = 0
Dim box11 As DropDownList = CType(SalesGView.Rows(rowIndex).Cells(1).FindControl("CatCode"), DropDownList)
[Code] ....
Using StringBuilder im building my object in code behind so its customize for our needs.. I placed a Literal control within the modalpopup and populating it when you click on a button..On my test page everything works great to display it and when fed a value video file, it plays.. on that page, it wasnt contained within a modalpopup.Now on my actual dev page that i need it on, i placed the literal control within the modalpopup, and when you click on the button, it builds the object..my modal popup comes up and everything shows up except the object which is weird, because within the stringbuilder i have 4 buttons below the object and those show up, just not the object control itself.. can a object not be built and displayed like this?What makes it weirder is that when the modal popup opens, you can view the source of the page and my entire customize object control is there, but it just doesnt render on the page..
View 4 Replies