AJAX :: Prevent ModalPopup From Disappearing After Wrong Login?
May 6, 2010
I put loginView control inside ModalPopupExtender, the problem is: when I try to login with wrong user/password and press the login button, this button cause a postback and then the page reloads and ModalPopup dissapears, only when I press the button wich cause ModalPopup to show itself, I see the loginview control with the message "username or password is wrong"
What can I do to prevent ModalPopup from disappearing after wrong login?
I have a GridView (insde a UpdatePanel with a Timer control) which is refreshed every 3 seconds and one of its fields (a TextBox) is "linked" to a HoverMenuExtender. It works great to display the Multline Textbox results but when the next refresh timer intervalcomes the TextBox control is re-populated with the new data and the user does not have the time to read its content.I am not sure if there is a way to maintain the content after each refresh (as long as I don't move the mouse of course).ere is part of my code:
I have a modal popup that i use to play a video, works great.. but once you close the popup if for any reason you hit the enter key or refresh the page at a later time, it causes the popup to open again. There are 3 buttons within the page that can call this popup, so where within my code behind would i add logic to prevent it from popping up unless you click one of those 3 buttons..
from th last one week i am searching for a requirement.
requirement is i have a anchor link for login. when i link login link login form should popup. when i enter correct details then that popup should close and redirect to home.aspx .if i give wrong credentials the popup should be there and should not close .and it has to display appropriate message.
I'm using the ModalPopupExtender control from the AJAX toolkit. This control extends a panel which contains a CreateUserWizard control. However, the validation of the CreateUserWizard control causes a postback to the server, which closes the popup. I'd like the popup to remain open, even after the postback.
i use the CreateUserWizard in order to create users. Asp.net generates automatically a password which is sent to the user by email.
The emailaddress must be like this: firstname.name@ourdomain.be . If 'firstname.name' doesn't exist in our Exchange server ('ourdomain.be'), then:
1) the user is still created 2) the message page with: 'Mailbox unavailable. The server response was: 5.1.1 User unknown' appears
E.g: if user John Wayne introduces by error Jhn.Wayne@ourdomain.be , then this user must not be created, and only a simple Alert-message must appear.
I tried a lot of Try / Catch / Endtry but all my attempts fail: the user is always created and the whole message page appears. I also tried with CreateUserWizard1_SendMailError sub.1
I have a weird thing happening. I have two identical databases installed on one virtual machine but under two different instances of SQLServer. For some reason, periodically when saving from one it will save to the other instead. Using debug, I have verified that the connection string is correct and when the item saves, it still saves to the wrong database.I use session variable, and am of the belief that it might have something to do with it...and t hat when I go from one to the other it is still getting the connection string form the other for some reason.To make sure that it isn't a problem, I make sure that I completely close out one database before opening the other in a new IE window.I assume that when I completely close out an internet explorer window that it abandons all session states. Is that true?
I have an ASP.NET v2 website which uses NHibernate for ORM. My current architecture is not that great and I will be changing it after reading some best practices but I wish to still try and figure out my current problem. I have a login screen which creates a ISessionFactory with the connection string set appropriately to the user name and password entered. The SessionFactory is then stored in HttpRuntime.Cache (all objects stored in the HttpRuntime.Cache have an expiration of 30 minutes which is not ideal and may cause issues but hopefully is not relevant to this particular case).
Whenever a data query is made the application tries to retrieve a Session from HttpContext.Current. The first time this occurs no Session is present so one is created from the SessionFactory and stored for future reference. The same Session is therefore is used throughtout the application which is not ideal I believe and it is not explicity closed after each operation. There have been various issues with the application including timeouts which may be associated with not closing connections after each operation. An error that has recently appeared is:
Message: Login failed for user 'myusername'. Type: System.Data.SqlClient.SqlException Source: .Net SqlClient Data Provider Stack Trace: at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
This is only after a few minutes of using the application so should not be related to the use of HttpRuntime.Cache. The username in the exception (myusername) does not match the user specified in the connection string! Does anyone have any idea of what could cause this. I was thinking of ConnectionPooling but understand that the connection is made from a pool keyed on user name and password so it shouldn't confuse users. I am changing the application to use an IHttpModule to create a session per request which will be explicity closed after each operation but I would still like to know what causes the current problem.
I have a tabcontainer with three panels. Initially the second tab is not enabled. I have a button in the first panel which when clicked, enables the second tab and changes the focus to it via the code-behind (requires a post back but that is desirable, since I shall put business logic there).
Works perfectly well.. but if I repeatedly keep clicking the next and the disable buttons.. once in a while the entire page disappears.. i.e I get a blank browser screen (IE6 and Chrome) and in FF the second tab doesn't become disabled at all.
After deploying our web application, one of the user was not able to login to the application. After checking, we could realize that his system date was worng, It was a greater than current date. If the system data was less than the current date we can still login. We are using asp.net membership
I have a small tabcontainer at the footer of my page with a gridview in several tabs - this works fine. Customer has asked for a re-design and for the tabcontainer to cover the entire page. When I increase the size of the tabcontainer (say to 550px) the gridviews disappear!
Noticed a few things;
- If i move the gridview before or after the tab container it is displayed
- There is definatly data in the gridview
- Controls on another tab work fine (these are the ones that were previously covering the rest of the page)
I'm creating a login page. I want to limit the number of login attempts, say not more than 5, in case of wrong.I want to do it without using the asp:loghin controls and the membership.How can restrict it??
I wanted to know how to add the feature- that user should be redirected to an error page where the error will be display, upon entery wrong username/password when trying to login through an asp.net login control?
1. how to redirect the user to an error page upon entering wrong username/password (from a login control which is placed on master page)?
2. how to pass the error to the error page so it can be displayed there?
I have a very weird thing happening. I have two databases that have exactly the same tables but different database names on the same virtual machine, but in different instances of SQL Server. For some reason, when using one of them, it will save to the other. In debug, looking at my connection string..I have verified that it is correct, yet when I allow the save, I look in the table and it isn't there, it is in the other database that is in a table with a completely different name and in a different instance of SQL Server.
I am using forms authentication on ASP.NET. If I try to access a page by copying the query string and pasting it into the browser, it allows me access to the page. How can this be prevented? I want the user to always have to login.
I am using asp.net membership and the login control. I would like to prevent a user from logging in with the same use rname if they are already logged in. I would like to place code in the LoggingIn or Authenticate event of the login control to check whether the user is login and prevent them from logging in again. Any ideas on the best way to do this?
i have create web application for school management system...bt when i run my webside...(my welcome page is defaul.aspx bt if i want to acces studentdetail.aspx then i only enter url and i get studentdetail.aspx)
I want to implement Login session , in which one user can login from one device only ..and if on other device try to login with same ID the First Device get an Alert..
I have the modal popup come up for searching something. Inside the popup (panel) I have a txtbox and a search button. I enter text and hit 'search' and the results are shown in a listview within the popup. Now every row in the list view has a button "Select". I want to click on one of those buttons to select a particular value.
Now on click of the button(within the listview), I tried calling a javascript function and doing $find('mdlPopup').hide(); , which makes the popup dissappear. But somehow the debugger takes me straight to Global.asax.Application_Error() and doesn't even give me a stack trace to see wht the issue is. And over that, the popup looks dissapeared, but the rest of the controls on the page are not enabled back. Strange?
I'm assuming, that the popup doesn't close as intended and it errored out (which took me to Global.asax.Application_Error() ), and is not enabling the rest of the controls in the page.So my question is, how do I assign multiple buttons in a listview to the okbutton (or cancelbutton) of a modalpopup extender?
I am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
