I've defined a custom HttpHandler,
public class RequestHandler : IHttpHandler
Which I pass all my requests through,
<configuration>
<system.webServer>
<handlers>
<add name="RequestHandler" path="*" verb="*" type="WebApplication6.RequestHandler" />
</handlers>
</system.webServer>
Does this class get re-constructed every time someone requests a page or not?
We're trying to implement functionality that intercepts, inspects, and alters if needed data in the Request.QueryString and Request.Form collections.
Since Request.QueryString and Request.Form are readonly, is it possible to use a HttpModule to do this without Reflection or Response.Redirect?
We're thinking that we can construct a new HttpRequest, and replace the original one. Would there be any implications in doing this?
I know mocking this object is impossible without using HttpRequestWrapper, but wasn't sure whether ASP.NET sets other things beyond the constructor.
If I have an & in the URL I get a bad request. I have followed the instructions at [URL] but still no luck. If I remove
[Code]....
from web.config it works. Encoding the URL does not help.
I'm using HttpModule to capture requests to the web server. Before processing the page I'd like to check the values contained in some keys of the Request.Form collection and according to some logic change if necessary. I'd like to do this when BeginRequest event is fired. The problem is that the Request.Form collection is readonly.
View 4 RepliesI'm in a situation where a GET request is made of my server without any content-length header. After the GET request is sent the client then sends a small chunk of data (8 bytes to be exact). It's imperative to note that this data is not meant to be treated as a request body. For this reason asp.net/iis ignores it. I cannot read it and the input stream says it has a length of 0. This is the correct behaviour!
What I need to do is somehow hook into the request processing pipeline early enough to read this data and somehow append it to the request (Items?) I don't know how to do this 'correctly'. I figure I should probably create an IHttpModule to check if the request is of the type that will have this data, then somehow read it.
How would I go about this? How would I be able to read this information in from the stream? I've tried adding an event handler to HttpApplication.BeginRequest but everything I try to read the stream fails. I've read that I could potentially add a custom header using reflection (this would allow me to add a content-length header) but this feels nasty and hacky - I presume there's just a place where I can hook in and handle the reading of the stream before passing it on for further processing.
Using a Windows application I am sending a web request to a web page and getting the response back using the following code
HttpWebRequest oRequest1 = (HttpWebRequest)WebRequest.Create(url);
oRequest1.ContentType = "text/xml";
using (Stream stream = oRequest1.GetRequestStream())
{
stream.Write(fileBytes1, 0, fileBytes2.Length); //fileBytes1 - contains the data of first request
}
HttpWebResponse Response1 = (HttpWebResponse)oRequest1.GetResponse();
->The above code works fine
But I need to enhance the code to accomodate following additional scenario
->Send another request to the same web app and
->get the response back
The first request sent contains the credentials to access the web application the second request sent doesn't have credentials, it must use the credentials of first request. I am using the same (following) code for the second request too. I get an error saying that it's looking for credentials
HttpWebRequest oRequest2 = (HttpWebRequest)WebRequest.Create(url);
oRequest2.ContentType = "text/xml";
using (Stream stream = oRequest2.GetRequestStream())
{
stream.Write(fileBytes2, 0, fileBytes2.Length);
}
HttpWebResponse Response2 = (HttpWebResponse)oRequest2.GetResponse();
So how do I accomplish this? Should I be sending the second request using same session or same connection?
I am trying to call a webservice that requires me to authenticate and then pass the session id returned from the authenticate method to subsequent web service calls. The session id has to be passed as HTTP request header. So I tried using the following code to add the session id to a HTTP request header:
System.Collections.Specialized.NameValueCollection headers =
HttpContext.Current.Request.Headers;
Type t = headers.GetType();
//get the property
System.Reflection.PropertyInfo p = t.GetProperty("IsReadOnly",System.Reflection.BindingFlags.Instance
| System.Reflection.BindingFlags.IgnoreCase | System.Reflection.BindingFlags.NonPublic
| System.Reflection.BindingFlags.FlattenHierarchy);
//unset readonly
p.SetValue(headers, false,
null);
//add a header
headers.Add("Cookie",
"SID=" + sessionId );
The header is supposed to be called "Cookie" and the SID contains the session id. The problem is the last line in the code above gives an exception saying "Operation is not supported on this platform". I am running this code on my dev machine with with Windows XP Professional Service Pack 3 and IIS 5.1. I haven't been able to find any solution to this problem after days of searching. I also tried to deploy my web app on IIS directly but had the same error.
I am using Webhandler to upload images to the server. I want to send the folder name so on that folder the images will save. I am using this URI format and got the below error.
builder.Path = builder.Path.TrimEnd('/')
+ "/Services/FileReceiver.ashx?foldername=" +
folder;
this.Uri
= builder.Uri;
Also I added the following line in the web.config but still having the issue.
<httpRuntime requestValidationMode="2.0" />
A potentially dangerous Request.Path value was detected from the client (?). Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: A potentially dangerous Request.Path value was detected from the client (?).
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack
Trace:
[HttpException (0x80004005): A potentially dangerous Request.Path value was detected from the client (?).]
System.Web.HttpRequest.ValidateInputIfRequiredByConfig() +8884233
System.Web.ValidateRequestExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +35
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184
Version
Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
I am doing some redirecting of old url in global.asax's application_beginrequest. Redirecting works fine when getting the url's using an http get but not when using an http head request.
View 4 RepliesI created an application and implemented IHTTPHandler for all incoming request ending with ".aspx" extension.Under "ProcessRequest" module, I am creating an instance of HttpContext (with URL attributes different from my application's URL i.e. if I am working on localhost then speciying Yahoo.com as its URL) and assigning it to "context" which comes as method argument.After redirection, an error is generated. Also, the custom HTTPContext is not passed to the requested page (default.aspx, in my case.)Code is as follows.
[Code]....
i redirect a page from http to https using http module begin request handler .i am calling webservice using ajax but it is saying webserice not defined .which otherwise works fineits work fine when rediect page in page_load instead .but i need to add function for https to http in every page. i still not know why ajax is not working when i use http module for redirect
View 3 RepliesI have a webservice which works 100% fine on my developer machine. Where Web Service is installed on LOCALHOST on my developer machine,Then i went to my servers, I installed webservice on one server and map it with the server where the website is hosted, Then i tried accessing this service using BROWSER from my web server, it worked fine, That means the mapping was done perfect.Then i run my program on web server (website). It worked fine on page1, then on page2, but when i did the same and call same function on page3, It popped me any error of
View 4 RepliesIs it at all possible to inject a request into IIS for a page, have IIS and ASP.Net handle it as normal, but get the response as html handed back to me programmatically?
Yes, I know that I could connect to port 80 using WebRequest and WebResponse, but that becomes difficult if you are accessing the IIS server from the same physical machine (loopback security controls et al).
Basically, I want to inject the request (eg for [URL]) between the points at which IIS would normally talk to the browser, and the point at which it would route it to the correct ASP.Net application, and get a response back from IIS between the points at which ASP.Net/IIS applies the httpfilters and hands the html back to the browser.
I'm predominantly working with IIS7 so if there is a solution that works just for IIS7 then thats not an issue.
This is a input
<input type="image" src="<%=Url.Content("~/images/shopping-cart.jpg")%>" alt="shopping cart" id="btnshoppingCart" name="btnshoppingCart" value="shoppingCart" />
when i browse the page with firefox and click on the input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is statisfied.
When i browse the same page with internet explorer 8 and click on the same input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is not satisfied. When i used the watch i saw that there is no key by the name of "btnshoppingCart" in either Request.Form or Request.Params if input is clicked from internet explorer. However when it is clicked from firefox there is value "shoppingCart" inside Request.Form and Request.Params against "btnshoppingCart" key. One more strange thing that i observed was that are two keys "btnshoppingCart.x" and "btnshoppingCart.y" inside both Request.Form and Request.Params whenver clicking is done from both internet explorer and firefox. This is happening against all inputs of type image irrespective if the input is present inside a html form or not. Forms are created like this
<% using (Html.BeginForm("Action", "Controller", FormMethod.Post)){%>
The version of internet explorer is 8.0 and firefox is 3.6.6
I there a way to know if a request is a soap request on AuthenticateRequest event for HttpApplication? Checking ServerVariables["HTTP_SOAPACTION"] seems to not be working all the time.
public void Init(HttpApplication context) {
context.AuthenticateRequest += new EventHandler(AuthenticateRequest);
}
protected void AuthenticateRequest(object sender, EventArgs e) {
app = sender as HttpApplication;
if (app.Request.ServerVariables["HTTP_SOAPACTION"] != null) {
// a few requests do not enter here, but my webservice class still executing
// ...
}
}
I have disabled HTTP POST and HTTP GET for webservices in my web.config file.
<webServices>
<protocols>
<remove name="HttpGet" />
<remove name="HttpPost" />
<add name="AnyHttpSoap" />
</protocols>
</webServices>
Looking at ContentType for soap+xml only partially solves my problem. For example,
Cache-Control: no-cache
Connection: Keep-Alive
Content-Length: 1131
Content-Type: text/xml
Accept: */*
Accept-Encoding: gzip, deflate
Accept-Language: ro
Host: localhost
mymethod: urn:[URL]
Some clients instead of having the standard header SOAPAction: [URL], have someting like in example above. "mymethod" represents the method in my web service class with [WebMethod] attribute on it and [URL] is the namespace of the webservice. Still the service works perfectly normal. The consumers use different frameworks (NuSOAP from PHP, .NET, Java, etc).
I develop an asmx web service (i.e. ASP.NET 2.0). There's a piece of code that may read the contents of the HTTP request (via HttpContext.Current.Request.InputStream) while processing it. I realise that InputStream may only be read once for a request, and I make sure I never try to read it more than once.
The problem seems to be that if InputStream happens to be read during the early stages of the application's lifecycle (e.g. after pskill w3wp, during Application_Start), the HTTP request fails with a HTTP 400 - Bad Request error, with no explanation given, no exception thrown and no entry in the httperr log. If it is read later (e.g. within the web method itself), requests run fine whether InputStream is read or not. Application_Start runs fine if InputStream isn't read.
Is this some sort of ASP.NET bug? IIS bug? Or am I doing something wrong by daring to read InputStream? And if so, is there another way to get a look at the "raw" contents of the request without disturbing the inner workings of IIS/ASP.NET? In short, adding this code within Application_Start is enough to reproduce this error: using (StreamReader reader = new StreamReader(HttpContext.Current.Request.InputStream))reader.ReadToEnd();
I want to component to upload large filesP.How can I bypass request size и request processing time restrictions?
View 4 RepliesI am trying to use curl to access 3rd party webservice, I used the following code which works well if I try it on my own linux server, the data is being sent ok, but the IIS on the 3rd party server returns an error.
$longdata is a long string of data, maybe over 1000 characters long the 3rd party has many working clients with various implementations so the problem is on my side. what do I need to add to the request in order to get this through ?
<?php
$c = curl_init();
// curl_setopt($c, CURLOPT_HTTPHEADER, array('Expect:'));
curl_setopt($c, CURLOPT_URL, 'http://XXX.com/test/index.asmx');
curl_setopt($c, CURLOPT_POST, 1);
curl_setopt($c, CURLOPT_HEADER, 1);
curl_setopt($c, CURLOPT_RETURNTRANSFER, 1);
$post = array('param1' => 'XXXX', "param2" => "Y", "Param3" => $long_data);
curl_setopt($c, CURLOPT_POSTFIELDS, $post);
$response = curl_exec($c);
echo $response;
/*
Response:
HTTP/1.1 100 Continue
HTTP/1.1 500 Internal Server Error
Date: Tue, 05 Apr 2011 14:11:51 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
X-AspNet-Version: 2.0.50727
Cache-Control: private
Content-Type: text/plain; charset=utf-8
Content-Length: 100
Request format is invalid: multipart/form-data; boundary=----------------------------5d738237d9e0.
*/
?>
I am facing an issue while calling a web request thru my code. I have searched a lot on number of sites but did not get any solution.
Here is the code which I am using:
[Code]....
What is the difference between Request.RawUrl and Request.Url in ASP.NET?
View 3 RepliesWhat is the difference between the three ASP.NET objects:
HttpContext.Current.Request
HttpContext.Request
Request
Are these exactly the same?
Edit 1
Do these objects behave differently inside global.asax/global.asax.vb and default.aspx/default.aspx.vb.
Edit 2
OK I'll try to be specific this time. Which of the following should I use:
' File: global.asax
Protected Sub Application_BeginRequest(ByVal sender As Object, ByVal e As System.EventArgs)
If Request.Url.Port = 80 Then
'If HttpContext.Current.Request.Url.Port = 80 Then
[Code]...
How do I call Page.Request properties from a thread after the host headers are gone.
I used:
[Code]....
in Page_Load, but still get the error.
My ASP.NET Web app has a thread which calls a method in the Page. This method then calls:
searchQuery = Page.Request.Path
This throws an exception with a message of, "Request is not available in this context."
Encrypt request.querystring and Descrpt request.querystring
View 1 RepliesWebApp1: on IIS and configured with Windows authentication. Get User account from AD.
WebAPP2: a java web app on another windows box in same domain with authentication from AD
On web app1, I have a http handler like
public class MyHandler : IHttpHandler
{
public void ProcessRequest(HttpContext context)
{
string url = "http://WebApp2/Test";
HttpWebRequest myReq = (HttpWebRequest)WebRequest.Create(url);
CredentialCache myCache = new CredentialCache();
NetworkCredential netCredential = new NetworkCredential("myname", "mypassword", "");
myCache.Add(new Uri(url), "Basic", netCredential);
//...
myReq.Credentials = myCache;
//....
}
}
in above way, I can set authentication in code and pass it WebApp2.
But I don't want to put name and password in code. User info already available on WebApp1: in context.User I can find out the user info who already logined into WebApp1, so I want to pass this credential to WebApp2. I have tried to do following:
myReq.Credentials = CredentialCache.DefaultCredentials;
but I am failed becuast there is no data in CredentialCache.DefaultCredentials.
Both returns the incoming url, Just to know When to use Request.UrlReferrer and when Request.ServerVariables["HTTP_REFERER"] and why?Currently, in one of my application Urlreferrer is working in my local machine but its not working when went live?Additionally, its most appreciable if anyone can guide any alternative of both Urlreferrer and HTTP_REFERRER?
View 1 Replies