How To Bypass Request Size и Request Processing Time Restrictions
Mar 1, 2011I want to component to upload large filesP.How can I bypass request size и request processing time restrictions?
View 4 RepliesI want to component to upload large filesP.How can I bypass request size и request processing time restrictions?
View 4 Replieswhen ASP.NET throws an application error, IIS shows the 500 HTML error, but when a WCF service throws a FaultException (IIS 500), the client gets a proper SOAP fault with error message in it.
Is there any good documentation on this request processing?
I have seen a few posts regarding this issue but not one specific to my problem and I have no ideas as to what I need to do to debug this.I have some combo boxes on an aspx pages, when I select a value from the first one, it fills the second with value and so on with the third and fourth. This works with no problems until I wrap an asp.net UpdatePanel around the combo boxes and try to "ajaxify" the whole process so the page isn't dancing around. The exact error I get is: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 404
View 1 RepliesIm throwing some helpful exception in PageMethod and showing them on client side, It was working fine on local machine but when I tested on production site, its just showing "There was an error processing the request.".
View 3 RepliesI am looking details on the internal working of asp.net architecture. The topics need to include the following:
Asp.Net Thread/Application Pools
HttpRuntime
HttpApplication - When and how it is set up.How HttpContext is set up
How objects can passed along the pipeline using HttpContext.Current.Items
Why does modification of static variables requires locks in ASP.NET(advanced)IIS 7 Integration Mode
After checking the asp.net version on the web server it seems only the version 2.0 is available and so when I browse to the site i.e. http://servername/site
then I get this error below. Should I put something in the web.config file to solve this issue?It seems the error is to do with the reportviewer control I am using.
NOTE that the ERROR is on line 117Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify configuration file appropriately.
i have a web application which which proccesses some request on some data that client selects, when the client selects more than 20 objects and clicks on proceed the client recieves this error, because the server takes a long time to process, however if the records are less and hence a timely response is recieved, no such error comes?
i have increased the sessiontimeout as well as set the
Am getting this error on clicking any of my page link.
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 0"
How do i avoid this error.
I want to be able to (in code) tell the page to refresh at that point ignoring anything else it was going to do.
Explanation:
I have a property lets call it AllUsers
AllUsers
{
return Database.GetAllUsers();
}
Now I have put it like this because in my code I want to just use this property to browse all the users and not have to check if its null or not up to date. The problem is if my method .GetAllUsers() throws an exception e.g. database is unavailable. If this happens I want to display a message to the user and reload the page to its initial state.
e.g. something like this
AllUsers
{
try
{
return Database.GetAllUsers();
}
catch(Exception e)
{
AbortAllCodeAndReloadAndDisplayMessage(e.Message);
}
}
Now I can reload the page using Response.AppendHeader("Refresh", "0;URL=ThisPage.aspx");
but how can I abort all code? because if I use this where I have placed my method the code will run and then reload on the next page load.
Should I change by property design? I wanted to have a property which would always be valid and up to date so any code using it wouldn't have to worrie
I am create a simple report in visual studio 2008 by using crystal report. when I am run locally its work fine but when i copy web site and run this report its show following error.
Server Error in '/xyz' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
[Code]....
I have a ASP Web App that has been fine when deployed but now I've introduced Crystal Reports to it and is fine when testing.
On my Web Setup Project Ive right clicked, Add, Assembly and included:-
CrystalDecisions.Reportsource.dll
CrystalDecisions.Shared.dll
CrystalDecisions.web.dll
Ive run the setup on an pc away from the development environment but when connecting I get:-
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
Source File: C:inetpubwwwrootMala_Ordersweb.config Line: 52 Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded.
[Code]....
i make a web site using frame but session is expire message is
Object reference not set to an instance of an object
Description: HTTP 500. Error processing request.
Stack Trace:
System.NullReferenceException: Object reference not set to an instance of an object at System.Web.UI.Control.OnLoad (System.EventArgs e) [0x00000] in <filename unknown>:0 at System.Web.UI.Control.LoadRecursive () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessLoad () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessPostData () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.InternalProcessRequest () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 My Web Config file is<configuration> <!-- store the database connection info here --> <appSettings> <add key="sBook_StoreDBConnectionString" value="Provider=Microsoft.Jet.OLEDB.4.0;User ID=Admin;Data Source=C:Program FilesCodeChargeExamplesBookStoreBookStore_MSAccess.mdb;Persist Security Info=False" /> </appSettings> <system.web> <httpRuntime executionTimeout="1000" maxRequestLength="2000000" /> <!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to false will improve runtime performance of this application. Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="c#" debug="true" /> <!-- CUSTOM ERROR MESSAGES Set mode="on" or "remoteonly" to enable custom error messages, "off" to disable. Add <error> tags for each of the errors you want to handle. --> <customErrors mode="Off"/> <!--<customErrors mode="On" defaultRedirect="Login.aspx"> <error statusCode="500" redirect="Login.aspx"/> <error statusCode="404" redirect="Login.aspx"/> <error statusCode="403" redirect="Login.aspx"/></customErrors> --> <!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None" --> <authentication mode="None" /> <!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> <!-- SESSION STATE SETTINGS By default ASP .NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=localhost:42424" cookieless="false" timeout="60" /> <!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" /> </system.web> <connectionStrings> <add name="mydb" connectionString="Server=localhost;User=SYSDBA;Password=datacenter;Database=/opt/db/erp2.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> <add name="mydb2" connectionString="Server=localhost;User=blackberry;Password=acgmkRMS;Database=/opt/db/pwd.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> </connectionStrings></configuration>
I have an ASP.NET website that worked fine using and debugging in VS2008. I went through the upgrade process opening the solution in VS2010. I can run the site, but as I make changes in the app_code folder classes, they don't seem to commpile and warn me of compile-time errors. As soon as I get to a point that calls the class, the errors show up. Sounds JIT I guess, but this isn't how it was working in 08. Is there an option that was changed in the upgrade process? This is a large project, I really don't want to break something and not find out until some obscure page is opened.
View 1 RepliesWe're trying to implement functionality that intercepts, inspects, and alters if needed data in the Request.QueryString and Request.Form collections.
Since Request.QueryString and Request.Form are readonly, is it possible to use a HttpModule to do this without Reflection or Response.Redirect?
We're thinking that we can construct a new HttpRequest, and replace the original one. Would there be any implications in doing this?
I know mocking this object is impossible without using HttpRequestWrapper, but wasn't sure whether ASP.NET sets other things beyond the constructor.
I have a webservice which works 100% fine on my developer machine. Where Web Service is installed on LOCALHOST on my developer machine,Then i went to my servers, I installed webservice on one server and map it with the server where the website is hosted, Then i tried accessing this service using BROWSER from my web server, it worked fine, That means the mapping was done perfect.Then i run my program on web server (website). It worked fine on page1, then on page2, but when i did the same and call same function on page3, It popped me any error of
View 4 RepliesIs it at all possible to inject a request into IIS for a page, have IIS and ASP.Net handle it as normal, but get the response as html handed back to me programmatically?
Yes, I know that I could connect to port 80 using WebRequest and WebResponse, but that becomes difficult if you are accessing the IIS server from the same physical machine (loopback security controls et al).
Basically, I want to inject the request (eg for [URL]) between the points at which IIS would normally talk to the browser, and the point at which it would route it to the correct ASP.Net application, and get a response back from IIS between the points at which ASP.Net/IIS applies the httpfilters and hands the html back to the browser.
I'm predominantly working with IIS7 so if there is a solution that works just for IIS7 then thats not an issue.
This is a input
<input type="image" src="<%=Url.Content("~/images/shopping-cart.jpg")%>" alt="shopping cart" id="btnshoppingCart" name="btnshoppingCart" value="shoppingCart" />
when i browse the page with firefox and click on the input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is statisfied.
When i browse the same page with internet explorer 8 and click on the same input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is not satisfied. When i used the watch i saw that there is no key by the name of "btnshoppingCart" in either Request.Form or Request.Params if input is clicked from internet explorer. However when it is clicked from firefox there is value "shoppingCart" inside Request.Form and Request.Params against "btnshoppingCart" key. One more strange thing that i observed was that are two keys "btnshoppingCart.x" and "btnshoppingCart.y" inside both Request.Form and Request.Params whenver clicking is done from both internet explorer and firefox. This is happening against all inputs of type image irrespective if the input is present inside a html form or not. Forms are created like this
<% using (Html.BeginForm("Action", "Controller", FormMethod.Post)){%>
The version of internet explorer is 8.0 and firefox is 3.6.6
I there a way to know if a request is a soap request on AuthenticateRequest event for HttpApplication? Checking ServerVariables["HTTP_SOAPACTION"] seems to not be working all the time.
public void Init(HttpApplication context) {
context.AuthenticateRequest += new EventHandler(AuthenticateRequest);
}
protected void AuthenticateRequest(object sender, EventArgs e) {
app = sender as HttpApplication;
if (app.Request.ServerVariables["HTTP_SOAPACTION"] != null) {
// a few requests do not enter here, but my webservice class still executing
// ...
}
}
I have disabled HTTP POST and HTTP GET for webservices in my web.config file.
<webServices>
<protocols>
<remove name="HttpGet" />
<remove name="HttpPost" />
<add name="AnyHttpSoap" />
</protocols>
</webServices>
Looking at ContentType for soap+xml only partially solves my problem. For example,
Cache-Control: no-cache
Connection: Keep-Alive
Content-Length: 1131
Content-Type: text/xml
Accept: */*
Accept-Encoding: gzip, deflate
Accept-Language: ro
Host: localhost
mymethod: urn:[URL]
Some clients instead of having the standard header SOAPAction: [URL], have someting like in example above. "mymethod" represents the method in my web service class with [WebMethod] attribute on it and [URL] is the namespace of the webservice. Still the service works perfectly normal. The consumers use different frameworks (NuSOAP from PHP, .NET, Java, etc).
I develop an asmx web service (i.e. ASP.NET 2.0). There's a piece of code that may read the contents of the HTTP request (via HttpContext.Current.Request.InputStream) while processing it. I realise that InputStream may only be read once for a request, and I make sure I never try to read it more than once.
The problem seems to be that if InputStream happens to be read during the early stages of the application's lifecycle (e.g. after pskill w3wp, during Application_Start), the HTTP request fails with a HTTP 400 - Bad Request error, with no explanation given, no exception thrown and no entry in the httperr log. If it is read later (e.g. within the web method itself), requests run fine whether InputStream is read or not. Application_Start runs fine if InputStream isn't read.
Is this some sort of ASP.NET bug? IIS bug? Or am I doing something wrong by daring to read InputStream? And if so, is there another way to get a look at the "raw" contents of the request without disturbing the inner workings of IIS/ASP.NET? In short, adding this code within Application_Start is enough to reproduce this error: using (StreamReader reader = new StreamReader(HttpContext.Current.Request.InputStream))reader.ReadToEnd();
I am trying to use curl to access 3rd party webservice, I used the following code which works well if I try it on my own linux server, the data is being sent ok, but the IIS on the 3rd party server returns an error.
$longdata is a long string of data, maybe over 1000 characters long the 3rd party has many working clients with various implementations so the problem is on my side. what do I need to add to the request in order to get this through ?
<?php
$c = curl_init();
// curl_setopt($c, CURLOPT_HTTPHEADER, array('Expect:'));
curl_setopt($c, CURLOPT_URL, 'http://XXX.com/test/index.asmx');
curl_setopt($c, CURLOPT_POST, 1);
curl_setopt($c, CURLOPT_HEADER, 1);
curl_setopt($c, CURLOPT_RETURNTRANSFER, 1);
$post = array('param1' => 'XXXX', "param2" => "Y", "Param3" => $long_data);
curl_setopt($c, CURLOPT_POSTFIELDS, $post);
$response = curl_exec($c);
echo $response;
/*
Response:
HTTP/1.1 100 Continue
HTTP/1.1 500 Internal Server Error
Date: Tue, 05 Apr 2011 14:11:51 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
X-AspNet-Version: 2.0.50727
Cache-Control: private
Content-Type: text/plain; charset=utf-8
Content-Length: 100
Request format is invalid: multipart/form-data; boundary=----------------------------5d738237d9e0.
*/
?>
How can I get time of last request Sent in asp.net.. Actually I want to set automatic Idle timeout. So I planned to compare this time with current.
View 4 RepliesI am looking details on the internal working of asp.net architecture. The topics need to include the following:
Asp.Net Thread/Application Pools HttpRuntime HttpApplication - When and how it is set up How HttpContext is set up How objects can passed along the pipeline using HttpContext.Current.Items Why does modification of static variables requires locks in ASP.NET (advanced)IIS 7 Integration Mode
I have installed all on my server 2008. When i got to /localhost/sitecore/Website/sitecore. i get following error. what should i need to do Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Source Error:
Line 2575: <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
Line 2576: </httpHandlers>
Line 2577: <membership defaultProvider="sitecore"> -- this line shows errr
Line 2578: <providers>
Line 2579: <clear />
I am facing an issue while calling a web request thru my code. I have searched a lot on number of sites but did not get any solution.
Here is the code which I am using:
[Code]....
I am fresh in ASP.NET MVC framework. This is may be a silly question for you. Sorry about that.I have implemented a VirtualPathProvider. The VirtualPathProvider reads the view from File system.However my problem is the method GetFile(string virtualPath) is not executed every time for every request. I think it is related to the caching, isn't it? What I want is getting file every time for every request. Because for some cases, the page in the file system will be modified and users want the system shows the changes immediately.
View 1 Replies