here website1 is a sharepoint site and if it is working i want it to be that itself but if not working i want the users to be redirected to another website.
View 7 Repliesi have created a website with a template (CSS Full Site Flash 8) using VS 2010
and after i did host the site to the internet, ASP code didn't work
but HTML code works fine, for example this code for desplaying picture didn't work and the picture is not displaying:
<asp:Image ID="Image1" runat="server" ImageUrl="~/images/photo1.jpg" />
i don't know if it is from the web.config or if i missed something also i notes that the site in is not working in firefox browser (HTML code will appear instead of design) but in internet explorer the design works fine but without the asp controls
I have a login control that is working beautifully on my localhost, but not working on the server. It validates my username & password - and gives me an error if I enter an invalid username/password. However, if I enter the correct username/password, the page refreshes, but does not redirect me to the "ReturnUrl" that I see in the URL. I've seen posts on this, but nothing that I tried worked. I've tried setting the 'MembershipProvider'attribute of the login control. I don't want to set the DestinationUrl...I want it to take what is in the ReturnUrl in the querystring. I don't think it's a web.config issue cuz it works on localhost??
View 3 Replies I have a website which is hosted externally the primary domain is [URL]however I have since bought a new domain name [URL] which points at the same directory and default page.
I now have two problems firstly I want all traffic to come to my new domain and not the old one both users and search engines.
Secondly i have noticed in my google stats it records visits to my site as [URL] rather than the full name, again for reporting purposes it would be best if these also were reported as the full name.
I am thinking the code below added to each page on my site is the answer but wanted to check if there are any pitfalls.
If it wasnt my site wasnt hosted under the original name then I would disgard the speak-weather domain altogether.
Code:
[code]....
I have this code:
[Code]....
Logging in as Admin shows with break points that it goes to the else if and throws no error. However, it always goes to the default page of the participant. This is my global.asax entry:
how can i redirect the webiste from.net to co.in for example my sit name is fxcentral.netwhen the user enter the url like http://fxcentral.net it automatically redirect to http://www.fxcentral.co.inhow can achieve this
View 10 RepliesI have an action filter for verifying account types that would redirect if necessary by calling filterContext.RedirectToAction(actionName). This doesn't seem to be working anymore.
The main controller action still gets called and then I end up with an error about http headers since it looks like the call to filterContext.RedirectToAction did send back a redirect but then since the controller action still fires, it also sends back content.
What's the right way to redirect to a different action from within an ActionFilterAttribute?
I want to redirect from one page to another based on condition .
For e.g I want to redirect from www.abcd.com/Doc/blogs.aspx to www.abcd.com/movies based on condition which I need to check from code behind C#
I was trying to use Response.Redirect("movies.aspx");
but its not working in IE7
I am getting Http 400 bad request.... whereas in Firefox its working fine
My application is working fine in local environment but not working after push code in live. My locale environment and hosting environment both are having same configuration. Same app working fine 2 month before but in different domain but same hosting server.
how to check the both config / any possible to run debug mode in hosting server please let me know. below code used in all page for checking user session status but when I click on any link page redirect to login.aspx I think session got timeout. I don't know why session got time frequently, but this issue not happening in local environment (desktop).
[Code]....
[Code]....
I want to redirect different domains which I have to my newly created website using dotnetnuke. As it is currently working on this site [URL](when user type thescripts.com it redirects user to [URL]
View 2 Replieswhen users request http://test1.com/downloads, i need to redirect users to another diff domain web site (or) ip address
in asp.net 1.1/c#, can i do it thro' web.config (without compilation) or code? what are the options to do this? any adv/disadvantages using the suggested method?
how to redirect from a action to an external web site like paypal
View 1 RepliesIf Not IsDBNull(ext) Then
ext = LCase(ext)
End If
Select Case ext
'Case ".htm", ".html"
' type = "text/HTML"
'Case ".txt"
' type = "text/plain"
'Case ".doc", ".rtf"
' type = "Application/msword"
'Case ".csv", ".xls"
' type = "Application/x-msexcel"........................
I want to redirect to a new page, when i get 404.htm error page in the application.
View 4 Replieshttp://localhost:2386/Application/%2fApplication%2fRevision_Modifiers.aspx
migrated project to asp.net 4.0 from 2.0
i changed scriptmanager to toolkitscriptmanager
Response.Redirect Not Working properly generating above url
if i used Response.Redirect("Project_AddEdit.aspx?action=Edit", false);
I Have a issue with the Response.Redirect,we are using as follows.
Response.Redirect("~/Folder/Mypage.aspx?fileID="+fileName);
This works fine in the local host and in one of the server.
In another server,for a particular button,its not working.
The Issue is while redirecting is takes the tilda(~) in the Path and giving the following error.
Server Error in '/EventManagement' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /VirtualDirectoryName/~/Folder/MyPage.aspx
i have created sub domail of my sub folder in website.i want to navigate subdomail url to my project.so opening subdomain link i want to maintain its url in addressbar.
View 2 Repliesi have created sub domail of my sub folder in my website.. i want to navigate subdomail url to my project like.. www.subdomain.domain.com to www.domain.comwithout changing www.subdomain.domain.com url for example open w.glmmatrimony.com and subdomain www.rajarani.glmmatrimony.com opening subdomain link i want to maintain its url in addressbar.
View 1 RepliesI purchased a certificate from my hosting provider from my web site. There was some confusion as to whether I needed to use IIS to install it or if they would. After a few days and several phone calls they said they had it installed and configured, but when I tried to set up rewrite rules in web.config the site would not load. When I point my browser to https:mydomain it would load, but there was not green lock in the address bar and 'HTTPS' was not green. I contacted them again and after explaining the situation and being put on hold for 45 minutes I hung up. This morning the the site is working and HTTPS appears to be configured correctly.
I could find no changes to web.config on redirection, so how is it being redirected to HTTPS? I'm concerned that when I post changes to the site I could wipe out what ever they did to get it to work with HTTPS. Could changes been made 'above' my site on the server that I can't affect? Should I be concerned?
I'm trying to do some error handling in the Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs) in my my global.asax. I'm using VS2010, ASP.NET 4.0
I've tried the following:
[code]....
we are running into an issue with our ASP server. If you try to access a password protected page it does a security check and redirects you if you are not logged in, retaining the URL (ie. Members/MemberLogin.aspx?doc=/PodCast/Default.aspx) The vb script places the "/PodCast/Default.aspx" in a variable and holds it until the login process is complete. Once the user types in their username and password it is suppose to do a Response.Redirect(strRedirectURL) and go to the "/PodCast/Default.aspx" but instead it goes to the default.aspx page for logging in successfully.
The kicker is, I know the code is 100% correct becuase it was working on our previous server, but when we pushed all the data onto this server, everything works BUT that piece.
Try
client.Send(msg)
Global_asax.myLogger.Log(BitFactory.Logging.LogSeverity.Status, (-- Status --> form sent email to " + msg.To.ToString))
btnSendmail.Enabled ="
"False"
Response.Redirect("http://www.google.com/")
i am submiting a form on the button click and redirectiing to a site. But it is not working.
I have an action called EditProfile. To secure it I have added a class RequireUserLogin inherited from ActionFilterAttribute. In the OnActionExecuting, when I redirect user to login page, before going to login page, it first execute the EditProfile action code (which i don't expect) and than redirect the user to login page. I want to not come in action code. Currently the only option I have is throw exception. Is there any other options. The code is:
public class RequireUserLogin : ActionFilterAttribute
{
public override void OnActionExecuting(ActionExecutingContext filterContext)
{
if (string.IsNullOrEmpty(userID))
{
filterContext.HttpContext.Response.Redirect("http://localhost/test/login");
}
base.OnActionExecuting(filterContext);
}
The EditProfile action is:
[RequireUserLogin()]
public ActionResult EditProfile()
{
}
None of my response.redirects are working.They work fine in my test environment but one I host the website online none of my buttons will cause a redirect.I have tried Server.transfer but to no avail. I have stripped away the rest of the code to see if that works but still no redirect. It will run all the code and perform and database operations but it does not redirect.
[Code]....
[Code]....
I have a web application where all the pages inherit from a base class, where i have written some methods common to all pagesHere is the code i have written for logout event.
this.Session.Abandon();
FormsAuthentication.SignOut();
FormsAuthentication.RedirectToLoginPage();
My expectation is once the user logs out and if he tries to access any url directly by typing in the browser he should be redirect to login page.But this is not happening now. I have checked the session. it is getting cleared properly while logout. But the user is take in to the screen. How can i fix this? I am looking for something which i can write in the base class so thati need to have to write the same in all the pages. Also this should work in the case of login page(it should not redirect to login page again if try to access login page once user logs out. please not login page also inherits base class).