Configuration :: How To Load System.Data.DataSetExtensions Dll Although It Is In Bin And In Gac

Nov 9, 2010

In our web site project we need to reference the assembly System.Data.DataSetExtensions, 4.0.0.0. So we added a reference to it in the webconfig, but we are getting the following error on build:

error CS0012: The type 'System.Data.TypedTableBase`1<T0>' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data.DataSetExtensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'. We added the dll version 4.0.0.0 in the bin folder of the site just in case. At first in gac there was only version 3.5.0.0 of this dll, but we installed the 4.0.0.0 version via gacutil.exe. Now when we check with "gacutil.exe /l" the correct assembly version (4.0.0.0) appears to be loaded in gac, but we can not see it in the windows explorer in windows/assembly folder (there is only version 3.5.0.0). And we are still getting the same error. Obviously we missed something, but the question is what ?

View 1 Replies


Similar Messages:

Configuration :: Unable To Load File Or Assembly 'System.Web.Extensions?

Mar 15, 2011

Server Error in '/IMGcup' Application.

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

Source Error: [Code]....

Source File: C:inetpubwwwrootIMGcupweb.config Line: 24 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.

[Code]....

View 1 Replies

Configuration :: Could Not Load File Or Assembly 'System.Web.DataVisualization, Version=3.5.0.0...

Mar 4, 2010

I installed Cahrt control of ASP:Net and It works fine on local. I made neccessary changes on web.config but When I deploy it to my site I am getting the error ! It says as below;

Server Error in '/' Application.

Parser Error

Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.

Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

Source Error:

[Code]....

View 4 Replies

Configuration :: Error - Could Not Load Type 'System.Management.Automation.Runspaces.PSSession' From Assembly

Mar 23, 2011

I am developing the Windows Live@edu SSO integration with asp.net custom code.It uses the DLL called "System.Management.Automation" for executing Windows powershell v2.0 commands for connecting Outlook Live Apps.It works fine in localhost,but during deployment in Windows server 2008 , it shows error called

Could not load type 'System.Management.Automation.Runspaces.PSSession' from assembly 'System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'."

View 2 Replies

Configuration :: Getting An Error "Parser Error Message: Could Not Load File Or Assembly 'System.Web, Version=4.0?

Aug 25, 2010

I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.

View 1 Replies

Configuration :: Request For Permission Of Type "System.Data.SqlClient.SqlClientPermission, System.Data"

Oct 19, 2010

currently, I am working on the project where I have to configure Application on IIS7 with network drive and doing this I am getting the error regarding security. Let me explain in detail. We have two production server, both having Windows 2008. now one server acting as the storage server and other server will work as web server which having the IIS (here IIS7). Now, I have to deploy the application on the storage server and in web server I have to configure the application in IIS with the path of network drive (here network drive means path of the folder at storage server). At here I had provide the full path like \ servernamedrivename$foldername, and also provide the credential at "connect at" button.Now when I open the page it will display the page but with the following error.

Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. Now new question that Credential is proper or not? Here my both production server having the user : username1 and password: Password1 but the domain is different. So, what I do that enter only the username1 in user name and password1 in password box.

View 1 Replies

AJAX :: Unable To Load Type 'System.Web.UI.ScriptReferenceBase' From Assembly 'System.Web.Extensions,

Oct 11, 2010

i have installed ajax control kit successfully and all controls already came in toolbar tab named "Ajax Control toolkit"But when i try to design any page using with ajax control toolkit, follow error is coming:

Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.TypeLoadException: Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.

Source Error:[Code]....

Stack Trace: [Code]....

[TypeLoadException: Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.]
AjaxControlToolkit.ToolkitScriptManager.OnResolveScriptReference(ScriptReferenceEventArgs e) in [code]...

I am using VIsual Studio 2008 , framework 3.5 but i don't know why in error information version is showing 2.0

i install tool kit according 3.5 framework.also note, framework built-in ajax tags i can use fine and they work properly.

View 1 Replies

AJAX :: Ajaxtoolkit - Debug Error Could Not Load Type System.Web.UI.ScriptReferenceBase' From Assembly System.Web.Extensions

Dec 15, 2010

i have installed ajaxtoolkit 3.5 but when i debug i am getting this error Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' even i have changed my tags to

<asp:ToolkitScriptManager
ID="ToolkitScriptManager1"
EnablePartialRendering="true"
runat="server"></asp:ToolkitScriptManager>

View 6 Replies

Configuration :: Configuration Error / Unrecognized Configuration Section System.serviceModel?

Mar 10, 2010

I am getting this error on a website. does that mean the server is not competible with asp.net 3.5

Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Unrecognized configuration section system.serviceModel.

Source Error: [Code]....

Line 236: </assemblyBinding>Line 237: </runtime>Line 238: <system.serviceModel>Line 239: <serviceHostingEnvironment aspNetCompatibilityEnabled="true" />Line 240: </system.serviceModel>

Source File: D:Inetpubvhostsmuratmalli.comhttpdocsweb.config Line:
238

View 2 Replies

Finding Difference System.web.httpcontext.current.application And System.Configuration.Appsettings?

Jan 22, 2010

Can anyone tell me the differnce between

System.web.httpcontext.current.application["tag"]

or

System.Configuration.Appsettings["tag"]

View 2 Replies

Configuration :: Could Not Load File Or Assembly Or One Of Its Dependencies, An Attempt Was Made To Load A Program

May 10, 2010

My application is running fine locally when I deploy it it is giving me the above error saying

Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

View 6 Replies

Unable To Validate Data. At System.Web.Configuration.MachineKeySection.GetDecodedData?

Apr 16, 2010

I have several websites which get approximately 3000 pageviews in total per day, and I get this viewstate error roughly 5-10 times per day, caught in global.asax:

System.Web.HttpException: Unable to validate data. at System.Web.Configuration.MachineKeySection.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString

View 1 Replies

Configuration :: Error Occured: System.Data.SqlClient.SqlException?

Mar 21, 2010

I'm having a spot of bother deploying my database to my host using the Publishing Wizard. I'm using the .sql file generated along with RunSQL.aspx as discussed in this blog by Scott Guthrie.

The issue I am having is that the permission is set to dbo but this seems to be causing an issue with the hosted database as in I get the following error when I run RunSQL.aspx.

An error occured: System.Data.SqlClient.SqlException: Cannot find the user 'dbo', because it does not exist or you do not have permission. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ASP.runsql_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in d:~hosting details removed for security~RunSQL.aspx:line 88

Is there any way to make the Publishing Wizard set the owner to a particular username, i.e the username I use to access the hosted database.

View 2 Replies

Configuration :: System.Configuration.ConfigurationErrorsException: Name Cannot Begin With The '<' Character?

May 14, 2010

Here is my connection string...?? I cannot for the life of me find out where I'm missing a >, or where there is an invalid < .. the debugger directs me here....

<connectionStrings>
<add name="dbnameremoved" providerName="System.Data.Sql.Client" connectionString="server=dbserverremoved;database=dbremoved;uid=username;pwd=password" />
</connectionStrings>

View 2 Replies

Could Not Load File Or Assembly 'System.Web.Extensions

Jul 8, 2010

I purchased a new computer and put all my development software on. Now when I load an asp.net 2.0 project I get the following error:-

Code:
Error3E:RPPResolve-ITASPDotNET2.0HansooKwanDirections.aspx: ASP.NET runtime error: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. (E:RPPResolve-ITASPDotNET2.0HansooKwanweb.config line 44)E:RPPResolve-ITASPDotNET2.0HansooKwanDirections.aspx11E:...HansooKwan

View 9 Replies

System.Security.Permissions.FileIOPermission When Using MEF To Load Dll's

Jul 16, 2010

I am trying to load some dll's into a MEF DirectoryCatalog within an ASP.NET MVC application:

var catalog = new DirectoryCatalog(HttpRuntime.BinDirectory, "Toptable.Mobile.*.dll");

When I run the app through the Cassini web server (i.e. F5) everything runs fine however when hosted in IIS(7) I get the following exception:

[code]....

The .NET trust levels for the application are set to "Full" both for the site and globally and I have set the trust level in web.config (system.web/trust) to Full.

View 2 Replies

MVC :: Error - Could Not Load Type 'System.Web.Mvc.UrlParameter'?

Mar 19, 2010

I just deployed a test MVC2 application to a shared host and get the error Could not load type 'System.Web.Mvc.UrlParameter' when firing up the application.This is a bin readable application as my hosting provider does not yet have MVC2 installed, however, they assure me this should run OK. Also this is a barebones application, basically the default project structure published for testing purposes.Any suggestions as to resolving this?

View 3 Replies

AJAX :: Could Not Load Type 'System.Web.UI.ScriptReferenceBase?

Jul 27, 2010

I am using Toolkit ScriptManager and Accordion and am getting this error.Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.

View 8 Replies

.net - System.Web.HttpException Could Not Load Type '[namespace]?

Feb 7, 2011

This started as Could not load type 'Global' error. After I tried a few things and getting no where I deleted the Global.asax file and now the error is Could not load type '[namespace].???'Where ??? is the class name of every page I try to load.The web site (when executed within VS2008, local dev computer) works fine but once published (with no errors) and deployed to the server gives me Could not load type '[namespace].???' error

I did install elmah and I was able to get more details for this "generic" Could not load type '[namespace].???' error

elmah reports a HTTP error 500 :

System.Web.HttpException Could not load type '[namespace].???' ->
System.Web.HttpParseException: Could not load type '[namespace].???'

I have checked the "basics"

References
Doing a clean and a build Checking the Inherits attr in the HTML against the code behind

UPDATE #1 I did deploy the site to a different DEV computer (configured IIS, virtual folder, etc.) and it works. When I use the same published code on the server, get the generic Could not load type '[namespace].???' error

UPDATE #2 I created a test web app. One form (Default.aspx) with a button. The click event does a Response.Write("Hello World"); I moved this app to the server and guess what, I get the Could not load type TestSite._Default

UPDATE #3 According to the fusion log viewer, these two websites are attempting to load CppCodeProvider and VJSharpCodeProvider, but I have no references to any of these. After a Google search, I found this post.I checked and I have no references to JAVA files.

View 1 Replies

Web Forms :: Could Not Load File Or Assembly 'System.Web.Extensions,

Mar 15, 2011

Server Error in '/IMGcup' Application.

Configuration Error
Description: An error occurred during
the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The
system cannot find the file specified.

Source Error:

[Code]....

Source File: C:inetpubwwwrootIMGcupweb.config Line: 24 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.

[Code]....

View 3 Replies

The Notorious 'Could Not Load File Or Assembly 'System.Web.Extensions'

Jun 10, 2010

I installed the app http://and when I ran the default page I get the error below:From my research they ask you to copy the DLLs into your bin folder and I did and still would not work.I see the DLLs at C:WINDOWSassembly folder.Where am I supposed to have the DLLs? what is the best practice? The log clearly shows it is looking for LOG: Initial PrivatePath = C:InetpubwwwrootPTIssueTracker2.5in after I enabled the Fusion log registry.i found the DLLs at C:Program FilesReference AssembliesMicrosoftFrameworkv3.5. Below is the error:

Configuration Error
Description:

An error occurred during the processing of a configuration file required to service this request.

Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

Source Error:

[Code]....

Source File: C:InetpubwwwrootPTIssueTracker2.5web.config Line: 80 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.

[Code]....

If I copy the DLLs from C:Program FilesReference AssembliesMicrosoftFrameworkv3.5
into C:InetpubwwwrootPTIssueTracker2.5in, I get the error below:

Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)

View 1 Replies

MVC :: Error Couldn't Load Type 'System.Web.Mvc.ViewPage'

Feb 18, 2010

My application has developed an issue that has got me baffled - i'm fairly new to MVC so please bear with me. I have an MVC web application and a Domain library, the domain has a DataModel.dbml with a single table Enquiry I have a single view called Contact with a controller HelpController, this view has a few form fields to insert the data in to the database the view has the following at the top of the file

Inherits="System.Web.Mvc.ViewPage<Domain.Enquiry>"

My controller has two actions as follows:

[ActionName("Contact-Cinnamon-Studios")]

View 2 Replies

Error Message: Could Not Load File Or Assembly 'System.Web?

Mar 3, 2011

An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

View 8 Replies

C# - How To Load Javascript Files In Client System Once And Reuse Them

Feb 20, 2010

I have a large scale application which uses javascript for many reasons. these javascript files included in some JS files and JS files imported to Asp.net Masterpage files.

this JS files contents (javascript functions) will add to page when page display to user, so a Bunch of waste Javascript functions will include in Asp.net pages.

I'm lookingfor a way which these JS files downloads to users computer (any where, e.g: temporary internet files or some where else) and the Asp.net page use that functions which downloaded with page.

I also want to download 1 time ( per user login or per Open Session ) to users computer.

So How to download JS file to Users PC and Use them in Asp.net Pages

View 4 Replies

Getting System.IO.FileLoadException - Couldn't Load File Or Assembly

Jun 30, 2010

I have a rather simple internal ASP.Net Website that has issues loading the Microsoft.Practices.EnterpriseLibrary.Data dll about once a week. Here is the Exception message:

System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied.
File name: 'Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null'
at foobar.Intranet.Logic.Data.UserDB.SelectByUserName(String userName)
at foobar.Intranet.Logic.Info.User.ValidateUser(String userName) in F:Developmentfoobarfoobarfoobar.Intranet.LogicInfoUser.cs:line 130
at Login.ValidateUser(String username, String password) in e:foobarfoobar.IntranetLogin.aspx.cs:line 32

Pre-bind state information
LOG: User = Unknown
LOG: DisplayName = Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null
(Fully-specified)
LOG: Appbase = file:///E:/foobar/foobar.Intranet/
LOG: Initial PrivatePath = E:foobarfoobar.Intranetin Calling assembly : foobar.Intranet.Logic, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null.

LOG: This bind starts in default load context.
LOG: Using application configuration file: E:foobarfoobar.Intranetweb.config
LOG: Using host configuration file: \?C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet.config
LOG: Using machine configuration file from C:WINDOWSMicrosoft.NETFrameworkv2.0.50727configmachine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/foobar.intranet/668896d8/82d7e51c/Microsoft.Practices.EnterpriseLibrary.Data.DLL.
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/foobar.intranet/668896d8/82d7e51c/Microsoft.Practices.EnterpriseLibrary.Data/Microsoft.Practices.EnterpriseLibrary.Data.DLL.
LOG: Attempting download of new URL file:///E:/foobar/foobar.Intranet/bin/Microsoft.Practices.EnterpriseLibrary.Data.DLL.
ERR: Failed to complete setup of assembly (hr = 0x80070005). Probing terminated.

Things of note:

A simple IIS Reset fixes the issue. We had the same code running on a single webserver with no problems. We then moved the site to two new, load balanced (using sticky sessions) webservers (all three Windows Server 2003 R2 Standard Edition SP1). Now each of the load balanced webservers throw this exception about once a week just out of the blue.The only major difference I can think of, is I've installed the 4.0 .NET framework on the load balanced servers. The website is still running under ASP.NET 2.0 so I don't see how this would be an issue I've configured the indexing service to not search the "Temporary ASP.NET Files" folder, but it didn't help. We use the Microsoft.Practices.EnterpriseLibrary.Data dll everywhere on our site. Almost every single page uses our logic dll which in turn utilizes the EnterpriseLibrary dlls. While the errors where happening once, I even looked to see what processes were locking the dll in the "Temporary ASP.NET Files" folder, and it wasn't any different than the locks on the server that was working fine. Once the error starts, it errors every single time until an iisreset is performed.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved