Configuration :: RegSvcs Error - The Assembly Does Not Declare An ApplicationAccessControl Attribute

May 1, 2010

I have a ASP.NET site, in which i have to register the dlls which i have created in VB.NET. I configured this project on Win2003 Server and register the dlls. It was working fine.

But when i rehosted it on same machine but by different folder, and try to register the dll, it is showing me the following warning.

C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>RegSvcs f:homeintermeshweberp1BinIndiamart.dll Microsoft (R) .NET Framework Services Installation Utility Version 2.0.50727.3053 Copyright (c) Microsoft Corporation. All rights reserved.

WARNING: The assembly does not declare an ApplicationAccessControl Attribute. Application security will be enabled by default.

Installed Assembly:
Assembly: f:homeintermeshweberp1BinIndiamart.dll
Application: Indiamart
TypeLib: f:homeintermeshweberp1BinIndiamart.tlb

View 1 Replies


Similar Messages:

DataSource Controls :: Declare Attribute With Select Top 1 / Error Incorrect Syntax Near The Keyword 'select'

Apr 14, 2010

I will declarate a attribute, but it gives me an error

This query works fine and returns 1 record from type int:

SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC

And when I will declarate a attribute/parameter it gives me an error:

DECLARE @dataObjectVersionId INT
SET @dataObjectVersionId = SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC

Error message:

Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.

View 4 Replies

Configuration :: Getting An Error "Parser Error Message: Could Not Load File Or Assembly 'System.Web, Version=4.0?

Aug 25, 2010

I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.

View 1 Replies

Configuration :: Deployment Error: Unrecognized Attribute 'type'?

Nov 26, 2010

I am trying to deploy my site from my computer to my server and I am getting the next error.

Server Error in '/Fleet' Application.

Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Unrecognized attribute 'type'.

Source Error:

[Code]....

Source File: C:InetpubwwwrootFleetWebweb.config Line: 12

I am using Framework 3.5

I have tried to change asp.net from 1.1.x to 2.0.x and I am getting other error : The page cannot be found

View 2 Replies

Configuration :: Error In Running Site - Could Not Load File / Assembly

Jun 17, 2010

I have uploaded site on web server but I am having the following error.
"Could not load file or assembly 'MySql.Data, Version=6.1.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.

Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'MySql.Data, Version=6.1.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.

View 4 Replies

Configuration :: Error: The Current Trust Level Does Not Allow Use Of The 'AspCompat' Attribute

Aug 25, 2010

<%@ Page Language="VB" MasterPageFile="~/template.admin.master" AspCompat ="true" AutoEventWireup="false" CodeFile="AddNewResumes.aspx.vb" Inherits="AddNewResumes" title="Sarian solutions - Add New Resume" %>

total website with this page runnig in the local system. but when i put in online system it giving error like

Parse Error:The current trust level does not allow use of the 'AspCompat' attribute

View 9 Replies

Configuration :: Error When Access Webpage Unrecognized Attribute 'requestValidationMode'?

May 7, 2010

I just download XAMPP, and it is running in my local computer. I added the index pages, and it works fine. However, when I copied my pages and all related information,I tried to access the page. Then, it displayed the error message below.

Parser Error Message: Unrecognized attribute 'requestValidationMode'. Note that attribute names are case-sensitive.Line 31: <system.web>Line 32: <httpRuntime requestValidationMode="2.0"/>Line 33: <trace enabled="true" requestLimit="40" localOnly="false" />

Note: The <httpRuntime requestValidationMode="2.0" is required because I am using a chkeditor with a textbox to create a microsoft word like effect. I remove itfrom the web config file, but then I get a similar error. This time, it was complaining about <add assembly="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>

View 9 Replies

Crystal Reports :: Configuration Error Could Not Load File Or Assembly CrystalDecisions.Web

Feb 13, 2011

when i use CR v13 in my web site there is error message

Configuration Error Could not load file or assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file
specified.

View 1 Replies

Configuration :: Error Message: Could Not Load File Or Assembly 'Microsoft.AnalysisServices, Version=9.0.242.0'

Jan 30, 2011

<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>

this error message appeared after i transfered the web application into another server and run it

the error row is as follow:

<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>

View 1 Replies

Configuration :: Error - Could Not Load Type 'System.Management.Automation.Runspaces.PSSession' From Assembly

Mar 23, 2011

I am developing the Windows Live@edu SSO integration with asp.net custom code.It uses the DLL called "System.Management.Automation" for executing Windows powershell v2.0 commands for connecting Outlook Live Apps.It works fine in localhost,but during deployment in Windows server 2008 , it shows error called

Could not load type 'System.Management.Automation.Runspaces.PSSession' from assembly 'System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'."

View 2 Replies

Web Forms :: Getting Error / Unrecognized Attribute 'targetFramework'. Note That Attribute Names Are Case-sensitive

Mar 17, 2011

I have a problem with my web site 1stSigBdeAssn.org. I have made no changes to the site but I now get the following error message:

Parser Error Message:

Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.

Source Error:

[code]....

View 4 Replies

Configuration :: Missing "linq" Assembly - Error CS0234

Oct 7, 2010

I'm building a site using VWD 2010 Express. The site seems to run fine in the browser but when debugging I get the following errors: Error 1 c:....Site.master.cs(3): error CS0234: The type or namespace name 'Linq' does not exist in the namespace 'System' (are you missing an assembly reference?) (I get this message 4 times) Error 5 The type or namespace name 'Linq' does not exist in the namespace 'System' (are you missing an assembly reference?) I've gone in to the Web.config and added the following:

<assemblies>
<add
assembly="System.Data.Linq,
Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
add
assembly="System.Core,
Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
add
assembly="System.Xml.Linq,
Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
add
assembly="System.Xml,
Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/><
/assemblies>
Site.master.cs includes a reference to "using System.Linq".

View 4 Replies

Configuration :: Unrecognized Attribute "targetFramework" Note That Attribute Names Are Case - Sensitive While Hosting

Nov 29, 2010

i'm trying to host an .net framework4.0 application in IIS7. i got an error while clicking on the manage module in modules .like ("Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. ") .I changed my application poll to .net4.0.I am able to browse my application

</system.serviceModel>
</configuration>

View 5 Replies

Configuration :: Unrecognized Attribute "targetFramework" - Note That Attribute Names Are Case - Sensitive

Oct 20, 2010

I installed Microsoft Visual Studio 2010 Ultimate Trial and converted existing asp.net 2.0 web application and I am getting this error: znrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. It's coming from this section in the web.config which was auto-generated by VS2010 when I converted the project:

<compilation defaultLanguage="c#" debug="false" targetFramework="4.0">
<compilers>
<!--<compiler language="c#" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" extension=".cs" compilerOptions="/d:DEBUG;TRACE" /></compilers> -->
<compiler language="c#" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" extension=".cs"/></compilers>
<assemblies>
<add assembly="Microsoft.JScript, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>

View 1 Replies

Set The Inherits Attribute Of An ASPX Page Directive To A Class In An Arbitrary Assembly?

Feb 24, 2011

Is it possible to set the Inherits attribute of an ASPX Page directive to a class in an arbitrary assembly?

I need to modify an ASP.NET (1.1) application for which the source code was lost. In a new assembly (foo2.dll) I've created a replacement code-behind class that derives from the original class in the site's code-behind assembly (foo.dll). It seems easy enough to set the Inherits attribute of the Page directive to the new class name, but when I do that the web server gives me Could not load type 'Foo2.checkout2'. I am referencing the new assembly in the <assemblies> section of Web.config.

I don't see anything in the documentation to indicate that this scenario is unsupported, but I'm not certain that it is, either.

Original

<%@ Page Inherits="Foo.checkout" language="c#" Codebehind="checkout.aspx.cs" AutoEventWireup="false" %>

New

<%@ Page Inherits="Foo2.checkout2" CodeFile="checkout2.aspx.cs" CodeFileBaseClass="Foo.checkout" language="c#" Codebehind="checkout.aspx.cs" AutoEventWireup="false" %>

View 1 Replies

Forms Data Controls :: ListItem Error Message Validation(ASP .Net):Attribute CssClass Is Not A Valid Attribute Of Element ListItem

Sep 17, 2010

I have a tag:

<asp:ListItem
CssClass="LabelCSS">Executive</asp:ListItem>

and I am getting the error message

Validation(ASP .Net):Attribute CssClass is not a valid attribute of element ListItem.

What attribute would I use for Css with ListItem?

View 2 Replies

Web Forms :: Error - Must Declare Scalar Variable

Dec 11, 2012

when I am executing an above code and click on button to insert data is shows an error message

as: System.Data.SqlClient.SqlException: Must declare the scalar variable "@imagefile"

Protected Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
Try
If fileupload1.HasFile Then
'getting length of uploaded file

[Code]....

View 1 Replies

Error / Must Declare A Body Because It Is Not Marked Abstract Or Extern? C#/ .NET

Mar 24, 2011

I have a normal web form with code behind, in this code behind I can instantiate a couple of classes I have in the root folder, such as:

public partial class _Default : System.Web.UI.Page

{
Helper helper = new Helper();

protected void Page_Load(object sender, EventArgs e)[code]....

It's working fine but I now want to move my class files (Helper.cs for example) to the app_code folder but when I run the application I get error on

SharePoint sharePoint = new SharePoint();
public string id { get; set; }

must declare a body because it is not marked abstract or extern,

View 2 Replies

Recompile The Assembly To Use The New Mono Assembly Versions The Assembly Is Closed Source?

Feb 18, 2010

I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html

Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.

How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)

View 1 Replies

SQL Server :: Using SQL INSERT Command With DataGrid - Must Declare The Scalar Variable Error

Mar 28, 2011

OK, this may be a little difficult to explain, so I will try my best and post the code I currently have.

I have a table with a list of usernames. I have the list of usernames displayed on a page through a GridView. What I am attempting to do is for each username in the column "adminUsernames", I need to insert a set of values in another database table for EACH "adminUsernames" that exists. Example: There are 2 adminUsernames vales in 2 seperate rows. These are "Admin 1" and "Admin 2". For each adminUsername values (Admin 1, Admin 2), I need a row interted in another database table. Maybe the code that I have (that does not work) will help you see what is happening:

[Code]....

I keep receiving this error when running: [Code]....

View 3 Replies

SQL Server :: Update Command - The Error Shows Like "Must Declare The Scaler Value @Name?

Dec 22, 2010

what is the problem with my update command ? the error shows like "Must declare the scaler value @Name.

[Code]....

View 13 Replies

DataSource Controls :: How To Insert A Picture On A Gridview / The Error - Must Declare The Scalar Variable

Feb 28, 2010

i would like to insert a picture on a gridview, but i allways get the error:

Must declare the scalar variable "@IMAGEM"

somme one can on tihs code ? here is my code:

[code]....

View 13 Replies

Configuration :: When Access The Second Url, Got The Following Error.Description: An Error Occurred During The Processing Of A Configuration File Required To Service This Request

Mar 31, 2010

We have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:

[Code]....

View 3 Replies

Configuration :: How To Reference An Assembly Manually

Oct 28, 2010

I downloaded the trial version of abcpdf, which is absolutely fantastic!

Anyway, real simple, you just need to reference the .dll and off you go...

So, I got my code working, but when I moved to production server I hit a wall.

It definitely has to do with the .dll because when I comment out the pdf sub routine, the code executes and completes all other tasks. When I uncomment, It's not working.

The trouble is, on my server I don't have the full version of VS, so I am unable to add a reference, which I presume takes care of the web.config settings? I manually dropped the .dll into the bin folder and I added the assembly line into web.config, but, as I don't have the above, I am not sure if the token key is correct.

To test this, I uploaded the working .dll file to my server, which I assumed the key is associated with, but still the same.

how to either get the correct key and/or how to reference an assembly manually? Is there something I have missed?

View 2 Replies

Configuration :: Missing Assembly After IIS Restart

Apr 24, 2010

I have strange problem with missing assembly of my application after IIS restart. My application is installed correctly to IIS 7.5 (windows 7) and works fineAfterwards I make a restart of IIS serverNow my application is not working properly, some classes (assemblies) are missing. I've insterted a code to my application that writes all avaible assemblies into my log file (see code below ) and really a few assemblies are missing[Code]....

Restart of IIS or even restart of windows is not enoughThe workaround is to make some change in web.config or to rewrite some *.dll by the same dll library (in order to force IIS to reload whole application)afterwards it works fine again (till next restart of IIS) for better understanding I've recorded a video for you [URL] Do you have any idea how to solve it? or what what to check? (My application is based on ASP.NET and I'm using ported version of Jade framework (framework originally created in Java).) This problem is related to another problem on this forum [URL]

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved