Configuration :: When Access The Second Url, Got The Following Error.Description: An Error Occurred During The Processing Of A Configuration File Required To Service This Request
Mar 31, 2010
We have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
After checking the asp.net version on the web server it seems only the version 2.0 is available and so when I browse to the site i.e. http://servername/site then I get this error below. Should I put something in the web.config file to solve this issue?It seems the error is to do with the reportviewer control I am using. NOTE that the ERROR is on line 117Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify configuration file appropriately.
I am create a simple report in visual studio 2008 by using crystal report. when I am run locally its work fine but when i copy web site and run this report its show following error.
Server Error in '/xyz' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
I have a ASP Web App that has been fine when deployed but now I've introduced Crystal Reports to it and is fine when testing.
On my Web Setup Project Ive right clicked, Add, Assembly and included:-
CrystalDecisions.Reportsource.dll
CrystalDecisions.Shared.dll
CrystalDecisions.web.dll
Ive run the setup on an pc away from the development environment but when connecting I get:-
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error: [Code]....
Source File: C:inetpubwwwrootMala_Ordersweb.config Line: 52 Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded.
I have installed all on my server 2008. When i got to /localhost/sitecore/Website/sitecore. i get following error. what should i need to do Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Source Error:
Line 2575: <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> Line 2576: </httpHandlers> Line 2577: <membership defaultProvider="sitecore"> -- this line shows errr Line 2578: <providers> Line 2579: <clear />
I have a website on visual studio 2008 on my local machine. When I run through the debugger I get the following error, however when I browse the same website through the IIS manager (running IIS7.5), I can browse it. What do I need to fix to run it through debugger? The website is set as an application.
Error:
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Put together a little ASP.NET Web Application project in VS 2010. It includes a connection string to a remote SQL server, which is stored in Web.config. Everything works fine on my workstation, but when I test it on the web server I get this error:onfiguration Error Description:An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
I just got a new computer with Windows 7 and installed IIS, including support for ASP. I am running everything locally on my computer. A simple statement like <% response.write time() %> works fine, so ASP is working, However, when I try to run a page that accesses a database (at least, I am assuming that that is the root of the problem) then I get the unhelpful error message:An error occurred on the server when processing the URL. Please contact the system administrator.If you are the system administrator please click here to find out more about this error. I have no idea where to begin. the database is in the same location as it was on with my old computer, and I have adjusted permissions to the database so that everyone except Creator Owner has full permissions - for whatever reason I am not able to change Creator Owner permissions.
I uploaded a few new pages to a web site and now I am getting these errors no matter what I try. Parser Error
Description:
An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file Parser Error Message: Could not load type 'PSR.MasterPage2'.
There is a Compilation Error at the web site located at http://cforedu.comDescription: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0122: 'NovPotniNalog.CustomersGridView_RowDeleting(object, System.Web.UI.WebControls.GridViewDeleteEventArgs)' is inaccessible due to its protection levelSource Error:
[Code]....
Line 202:<div>Line 203:Line 204: <asp:GridView ID="ViewRelacije" runat="server" Line 205: BorderWidth="0px" Line 206: AutoGenerateColumns="False"
I want to delete a row in a way that it shows, but displays an error.
Im throwing some helpful exception in PageMethod and showing them on client side, It was working fine on local machine but when I tested on production site, its just showing "There was an error processing the request.".
am connecting online database in my website. whenever forms in idle one shows in server side. after refereshing that error cleared.what is the problem. that like thisA transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.
I have seen a few posts regarding this issue but not one specific to my problem and I have no ideas as to what I need to do to debug this.I have some combo boxes on an aspx pages, when I select a value from the first one, it fills the second with value and so on with the third and fourth. This works with no problems until I wrap an asp.net UpdatePanel around the combo boxes and try to "ajaxify" the whole process so the page isn't dancing around. The exact error I get is: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 404
Am getting this error on clicking any of my page link.
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 0"
Excuse me this common error. I´ve found a lot of info in Google but I´ve not found my error. I´m trying to read some data from a custom section in web.config and I don´t know which is my error?
i have the fallowing Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.Compiler Error Message: CS0246: The type or namespace name 'NVPAPICallerOtpoaz' could not be found (are you missing a using directive or an assembly reference?)
i write a site and get this error, i using VS2010.
An error occurred during local report processing.
The definition of the report 'ModulesReport1.rdlc' is invalid.
An unexpected error occurred in Report Processing.
Could not load file or assembly 'Microsoft.ReportViewer.ProcessingObjectModel, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
i try run on my machine its all work fine, but when i complier and run it on Window server 2008 get this error.
I read [URL] I install the ReportViewer.exe but still cannot find the Microsoft.ReportViewer.ProcessingObjectModel.dll, however I got find it Microsoft.ReportViewer.ProcessingObjectModel in C:Windowsassembly and is not a dll file.
I have built a webform as part of my project that grabs all the data out of a particular table in an Access database on the server. I have allowed the ability to update said table via the DetailsView form however when you change the details and then click on "update" it throws back an error.
No value given for one or more required parameters. Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: No value given for one or more required parameters.
Source Error:
[Code]....
Stack Trace:
[Code]....
I am not sure what has happened but it simply will not allow me to update any data. Here is a copy of the select, update and delete statement.
DeleteCommand="DELETE FROM [tbl_mmstafflist] WHERE [EngID] = ? AND (([EngCode] = ?) OR ([EngCode] IS NULL AND ? IS NULL)) AND (([EngName] = ?) OR ([EngName] IS NULL AND ? IS NULL)) AND (([EmailAddress] = ?) OR ([EmailAddress] IS NULL AND ? IS NULL)) AND (([Ext No] = ?) OR ([Ext No] IS NULL AND ? IS NULL)) AND (([Mobile No] = ?) OR ([Mobile No] IS NULL AND ? IS NULL)) AND (([Home No] = ?) OR ([Home No] IS NULL AND ? IS NULL)) AND (([Address 1] = ?) OR ([Address 1] IS NULL AND ? IS NULL)) AND (([Address 2] = ?) OR ([Address 2] IS NULL AND ? IS NULL)) AND (([Address 3] = ?) OR ([Address 3] IS NULL AND ? IS NULL)) AND (([Town] = ?) OR ([Town] IS NULL AND ? IS NULL)) AND (([County] = ?) OR ([County] IS NULL AND ? IS NULL)) AND (([Postcode] = ?) OR ([Postcode] IS NULL AND ? IS NULL)) AND (([Other email address] = ?) OR ([Other email address] IS NULL AND ? IS NULL)) AND [Visa card] = ? AND [Ex staff] = ? AND (([ExternalDirectDialNumber] = ?) OR ([ExternalDirectDialNumber] IS NULL AND ? IS NULL)) AND (([PayrollNumber] = ?) OR ([PayrollNumber] IS NULL AND ? IS NULL)) AND [NeedstoSeekApproval] = ? AND [IsStockController] = ? AND (([Group] = ?) OR ([Group] IS NULL AND ? IS NULL)) AND (([ContractedWeeklyHours] = ?) OR ([ContractedWeeklyHours] IS NULL AND ? IS NULL)) AND (([Grade] = ?) OR ([Grade] IS NULL AND ? IS NULL)) AND (([IP] = ?) OR ([IP] IS NULL AND ? IS NULL)) AND (([StaffTitle] = ?) OR ([StaffTitle] IS NULL AND ? IS NULL))"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [tbl_mmstafflist] where ([EngID] = @EngID)" UpdateCommand ="UPDATE [tbl_mmstafflist] SET [EngCode] = ?, [EngName] = ?, [EmailAddress] = ?, [Ext No] = ?, [Mobile No] = ?, [Home No] = ?, [Address 1] = ?, [Address 2] = ?, [Address 3] = ?, [Town] = ?, [County] = ?, [Postcode] = ?, [Other email address] = ?, [Visa card] = ?, [Ex staff] = ?, [ExternalDirectDialNumber] = ?, [PayrollNumber] = ?, [NeedstoSeekApproval] = ?, [IsStockController] = ?, [Group] = ?, [ContractedWeeklyHours] = ?, [Grade] = ?, [IP] = ?, [StaffTitle] = ? WHERE [EngID] = ? AND (([EngCode] = ?) OR ([EngCode] IS NULL AND ? IS NULL)) AND (([EngName] = ?) OR ([EngName] IS NULL AND ? IS NULL)) AND (([EmailAddress] = ?) OR ([EmailAddress] IS NULL AND ? IS NULL)) AND (([Ext No] = ?) OR ([Ext No] IS NULL AND ? IS NULL)) AND (([Mobile No] = ?) OR ([Mobile No] IS NULL AND ? IS NULL)) AND (([Home No] = ?) OR ([Home No] IS NULL AND ? IS NULL)) AND (([Address 1] = ?) OR ([Address 1] IS NULL AND ? IS NULL)) AND (([Address 2] = ?) OR ([Address 2] IS NULL AND ? IS NULL)) AND (([Address 3] = ?) OR ([Address 3] IS NULL AND ? IS NULL)) AND (([Town] = ?) OR ([Town] IS NULL AND ? IS NULL)) AND (([County] = ?) OR ([County] IS NULL AND ? IS NULL)) AND (([Postcode] = ?) OR ([Postcode] IS NULL AND ? IS NULL)) AND (([Other email address] = ?) OR ([Other email address] IS NULL AND ? IS NULL)) AND [Visa card] = ? AND [Ex staff] = ? AND (([ExternalDirectDialNumber] = ?) OR ([ExternalDirectDialNumber] IS NULL AND ? IS NULL)) AND (([PayrollNumber] = ?) OR ([PayrollNumber] IS NULL AND ? IS NULL)) AND [NeedstoSeekApproval] = ? AND [IsStockController] = ? AND (([Group] = ?) OR ([Group] IS NULL AND ? IS NULL)) AND (([ContractedWeeklyHours] = ?) OR ([ContractedWeeklyHours] IS NULL AND ? IS NULL)) AND (([Grade] = ?) OR ([Grade] IS NULL AND ? IS NULL)) AND (([IP] = ?) OR ([IP] IS NULL AND ? IS NULL)) AND (([StaffTitle] = ?) OR ([StaffTitle] IS NULL AND ? IS NULL))">
The SelectParameter is used because this page is a details page that is selected from a list. I would appreciate any help that you can offer. Unfortunately Access errors are not forth coming with information.
I am getting an error with my custom RoleProvider (based on System.Web.Security.RoleProvider) initializing in my ASP.NET application. The error is: "Description: An error occurred during the processing of a configuration file required to service this request." I see this below error happening on a Windows 2003 server with .NET 3.5 SP1. I have not seen it on Windows 2008 servers, and have not seen the error when the ASP.NET application was built under .NET 2.0 (running on this same server). Any thoughts on the nature of the error?
Classification: UNCLASSIFIED
Caveats: NONE Server Error in '/Assist' Application. Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 122: <clear /> Line 123: <add Line 124: type="Grb.Security.FrameworkRoleProvider" Line 125: applicationName="MyApplication1" /> Line 126: </providers>
Source File: D:inetpubAssistweb.config Line: 124
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
HERE'S THE INITIALIZING FUNCTION FOR THE ROLE PROVIDER:
Public Overloads Overrides Sub Initialize(ByVal name As String, ByVal config As System.Collections.Specialized.NameValueCollection)
Try If config Is Nothing Then Throw New ArgumentNullException("config") End If If String.IsNullOrEmpty(name) Then name = Me.GetType().BaseType.Name End If If String.IsNullOrEmpty(config(DescriptionKey)) Then config.Remove(DescriptionKey) config.Add(DescriptionKey, SR.GetString(SR.RoleSqlProvider_description)) End If MyBase.Initialize(name, config) ' Get the configuration settings Dim configurationSettings1 As Grb.Framework.Business.ConfigurationSettings = Grb.Framework.Business.FrameworkConfiguration.GetConfiguration() ' Load the DomainManager
Dim dataManager1 As New Grb.Framework.Data.Main(Nothing, configurationSettings1.FrameworkSchema, configurationSettings1.AssistSchema, _ configurationSettings1.ConnectionString, configurationSettings1.ProviderInvariantName, _ configurationSettings1.EnablePerformanceLogging, System.Web.HttpContext.Current.Request.PhysicalApplicationPath) ' Load the DomainManager Dim frameworkDomainManager As Grb.Framework.Business.DomainManager = New Grb.Framework.Business.DomainManager(dataManager1, -1, -1) m_ProductDomainManager = New Grb.PlugIn.Assist.Business.DomainManager(dataManager1, frameworkDomainManager) m_ApplicationName = config(ApplicationNameKey) If String.IsNullOrEmpty(m_ApplicationName) Then m_ApplicationName = SecUtility.GetDefaultAppName() End If If m_ApplicationName.Length > 256 Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_application_name_too_long))
End If config.Remove(ApplicationNameKey) If config.Count > 0 Then Dim attribUnrecognized As String = config.GetKey(0) If Not String.IsNullOrEmpty(attribUnrecognized) Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_unrecognized_attribute, attribUnrecognized))
End If End If Catch ex As Exception Throw New Grb.Framework.Core.Exceptions.FrameworkBusinessException( _ Resources.ExceptionMessages.FrameworkRoleProvider_Initialize, ex) End Try End Sub
Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development.
--> <compilation defaultLanguage="vb" debug="false"> <assemblies> </assemblies> </compilation> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <!-- 1 GB maxRequestLength --> <httpRuntime maxRequestLength="1048576" /> <sessionState mode="InProc" timeout="60" /> <!-- note: Set authentication timeout >= session timeout (session timeout will clear authentication timeout upon session_start) --> <!-- note: <forms name="xxxx" value must be unique for each "forms authenticated" web application run on an IIS web server --> <!-- note: For a more secure system, set requiresSSL="true" (and install/setup an SSL key on the web site) --> <authentication mode="Forms"> <forms loginUrl="TimedOut.aspx" slidingExpiration="false" requireSSL="false" timeout="60"/> </authentication> <authorization> <deny users="?"/> <allow users="*"/> </authorization> <membership defaultProvider="FrameworkMembershipProvider1" userIsOnlineTimeWindow="15"> <providers> <clear /> <add name="FrameworkMembershipProvider1" type="Grb.Security.FrameworkMembershipProvider" applicationName="Product1" passwordRetrieval="false" passwordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="true" passwordFormat="Hashed" minRequiredNonalphanumericCharacters="0" minRequiredPasswordLength="4" passwordStrengthRegularExpression="^[a-zA-Z0-9]+$" passwordStrengthFailedMessage="The password must be only alpha-numeric characters." frameworkDomainName="Master" maximumInvalidPasswordAttempts="3" maximumInvalidPasswordAttemptLockoutMinutes="30"/> </providers> </membership> <roleManager enabled="true" defaultProvider="FrameworkRoleProvider1"> <providers> <clear /> <add name="FrameworkRoleProvider1" type="Grb.Security.FrameworkRoleProvider" applicationName="MyApplication1" /> </providers> </roleManager> </system.web> <system.web.extensions> <scripting> <webServices> <!-- Uncomment this line to customize maxJsonLength and add a custom converter --> <!-- <jsonSerialization maxJsonLength="500"> <converters> <add name="ConvertMe" type="Acme.SubAcme.ConvertMeTypeConverter"/> </converters> </jsonSerialization> --> <!-- Uncomment this line to enable the authentication service. Include requireSSL="true" if appropriate. --> <!-- <authenticationService enabled="true" requireSSL = "true|false"/> --> <!-- Uncomment these lines to enable the profile service. To allow profile properties to be retrieved and modified in ASP.NET AJAX applications, you need to add each property name to the readAccessProperties and writeAccessProperties attributes. --> <!-- <profileService enabled="true" readAccessProperties="propertyname1,propertyname2" writeAccessProperties="propertyname1,propertyname2" /> --> </webServices> <!-- <scriptResourceHandler enableCompression="true" enableCaching="true" /> --> </scripting> </system.web.extensions> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <remove name="WebServiceHandlerFactory-ISAPI-2.0"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <location path="Default.aspx"> <system.web> <authorization> <allow users="*"/> </authorization> </system.web> </location> <location path="Portal.aspx"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="Login.aspx"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="PasswordChange.aspx"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="PasswordForgot.aspx"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="PasswordEntry.aspx"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <!-- Give ControlLoader.aspx full access and let it check session/authentication validation.
The rational is that if a user is "timed-out" and presses a button to load a control into ControlLoader, the ControlLoader validation will catch this condition and tell the parent page to reload (so the Login page doesn't appear in the modal-dialog).
I am trying to Upload data from Excel file. Transfer data from Excel file to XML file and passed it to Store procedure. And insert the record into database.I also set the timeout for command to zero. when i upload 1 to 500 rows its working fine and when I upload the 10000 rows than its takes time but upload all the users successfully at localhost. But when I upload the code to remote srever,than its only upload upto 300 or 400 rows.After uploading these users it will gives the error of Request Time Out . Even more if I tried to upload 50000 rows its give me the error of 'Maximum Length Exceeded'. Can anyone tell me what the maximum size of Excel sheet to upload the users. How I can get rid of the Request Time Out Issue. How I can Increase the server response time.
