I have a website hosted in IIS 6 and I can't start the website after I stop it. I have to bounce the whole box just to start the website again. I don't see anything logged in the event viewer and I don't know what is causing it.
View 3 RepliesI have modified a part of code of an existing web application. Once it worked fine on my local machine, I moved it to the common server. But, when different users hit the common server, the web application is behaving differently. I tried stopping and starting the website on the common server and it worked fine for sometime around a day and again it started working differently for different users. Then I tried to restart the IIS on the common server and it worked fine for once and again bounced back.Can anyone please suggest the areas where I can check to resolve the issue.
View 3 RepliesWhile i am running my asp.net application , it show an message that Unable to start a dubug on webserver. Unable to Connect Webserver. Verify web server is running and that incoming Http request are not blocked by a firewall. My application is configured with local iis. Early it is working peoperly. Some time it wil not show when we edit iis property. But right now i can unable to proceed my application by running.
I checked some forum with post of same issue. But still my problem not get solution yet.
I have application developed in vs 2005, when i try to run it throws below error.
"Unable to start debugging on the web server. The underlying connection was closed: An unexpected error occurred on a send."
I want to start and stop IIS on remote server using asp.net website.
When i try to stop IIS on remote PC, it raises error. I am using the following syntax "PsExec \Server2 -u Administrator -p somePassword IISReset /STOP". This works fine when called within VS IDE or from another C# code. However does not work when called from within asp.net app. I am using "Administrator" as user which has Admin access to both of machines.
My host moved my website to a new server. The DNS configuration is correct but the website is still down and I'm getting this message
"unable to open website at www.aboutmecfs.org. Internal Server error"
I'd installed newly Visual Studio 2010,and i want to create a new local website on my iis server and i follow these steps:
1-from my iis i create a virtual directory
2-in command promt i execute these commands:
aspnet_regiis -i
aspnet_regiis -ga aspnet
3-i go to VS2010 and create a new website (HTTP) and choose my created Virtual Directory has been built in previous step
Now if i do step 3 with framework 4 i don't have any problem but with framework 3.5 my website hasn't been run and says me : "Unable to start debugging on the web server.The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information."
I have a VB.NET VS2010 solution with a WinForms project that calls a web site project in the same solution. I can step into this web method: <WebMethod()> Public Function GetStartUpData() As DataSet and other web methods, but not the following method. I wonder if it has to do with the fact that that is the only web method that uses a parameter of Nullable type. The method works, I just can't step into it .If I try, I get the error: Unable to automatically step into server. unable to determine a stopping location
<WebMethod()>
Public Function RetrieveOrdersByFilter( _
ByVal customerId As Nullable(Of Integer), _
ByVal fromDate As Nullable(Of Date), _
ByVal toDate As Nullable(Of Date), _
ByVal fromStatusCodeId As Nullable(Of Integer), _
ByVal toStatusCodeId As Nullable(Of Integer)) As DataSet
I' ve been experiencing some serious problems with running my website.Everytime I click on the little green arrow to start debugging my website I get an error message in my browser.This problem occurs in every browser I use. Internet Explorer, Firefox, Google Chrome.I figured it had something to do with my internet settings, but they are exactly the same as the internet settings of a pc on which my website does run.Event installing Google Chrome without importing the settings from my primary browser (Firefox) has the same result.
The errors are:
Firefox: "The connection with the server was reinitialised during page load"
Internet Explorer: "The page cannot be displayed"
Chrome: "The page is unavailable. The page on http://localhost:PORTNUMBER/EventCompanion/Taak/Test/TestTaakEdit.aspx is probably disable temporarily or it has been permanently move to a new address."Even clicking with the right mouse button on an aspx page and selecting the "View in browser" option has the same result.The only thing that works is viewing the website in the internal browser provided by Visual Studio 2008.But that way I'm unable to debug, which is pretty enoying.
Running the website on an other pc works perfectly...
I've created a website and now I'm trying to publish it on web server but I'm getting a lot of errors related to 'web.config' that website working fine in my VS2010 but I don't know what's the problem on the server I'm getting following error:-
[Code]....
If I remove whole line 6 then it show error in line 7and so on, I've use radcontrol tool in my web application but whatever I've used they are working fine on my system.
my web.config file is here [URL]
I have just deployed a website using the copy website tool and I'm unable to get to the login page. I just get an HTTP 500 page saying:
The website is under maintenance The website has a programming error. I'm not sure what is happening here. The connection string points to a server hosting my SQL DB so I don't have to amend that. The website runs fine on the dev machine so I'm at a loss.
We are using a .net web application and my environment is as follows:-
SERVER : Server: Windows 2003
.NET FRAMEWORK : 3.5
ASP.NET FRAMEWORK : ASP.NET 2.0
Template used : ASP.NET Web application project ( not a web site)
I have code in global.asax.cs which is like below. This code dynamically loading the web.config. Is this right? Since the deployment accidentally the web.config been copied mutlitple times (in past) which was bringin uat web.config to prod and causing the prod to point to uat databae, we did this way, i.e dynamically reading the param values from a file and loading them to web.config dynamically.
Is this right? The web site is loosing connection string once a while and making the site to go down. One thing i noticed is in DEV / QA / UAT we have the ASP.NET version tab in iis set to 2.0, but in prod it's been set to 1.1. I told them to change, but somebody arguing how it worked for a while and suddenly stopped. I don't know the answer. Could somebody tell me or point me to a direction to fix this.
private void LoadConfig()
{
string xml = null;
FileStream fs = null;
StreamReader str = null;
System.Xml.XmlDocument xmlDoc = null;
System.Xml.XmlNode xmlNode = null;
EventLog _eventLog = null;
try
{
// Get the Config path from registry, parse and set the static properties of the class.
string configFile = CompName.CoreLib.SystemUtilities.RegistryUtility.ReadValue("ConfigPath") + @"ApplSettingsConfig.xml";
//string configFile = @"C:" + @"Common.Config";
// Read the XML Config File
fs = File.OpenRead(configFile);
str = new StreamReader(fs);
xml = str.ReadToEnd();
str.Close();
fs.Close();..............................
i develop a site that is working fine on my system. but when i publish this the data is not saving into the database. my database in in app_data folder. what is the problem.
View 2 RepliesI am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
I have a few app settings I want to update from within my web site and to do this I use this code:
[Code]....
This works fine in my development enviroment but when using IIS7 I get an exception while saving these settings:Access to the path 'C:InetpubwwwrootNSiteCOMweb.config' is denied.How can I configure IIS7 to allow my application to update web.config?
What is the right approach when users (authenticated domain admins) should be able to start batch jobs (usually exe files) from an IIS (7.x) aspx (c#) page? This is an intranet site. The batch jobs have to run on the web server as Domain Admins. The website pool is executed by network service or some similar restricted account in AD.
Approaches I can think of (and their disadvantages):
1. Start exe file with System.Diagnostics.Process.Start with another account. This feature is disabled in IIS 7.x, how do I allow it?
2. Create a sheduled task and call scheduled task-api. This unmanaged dll is giving VS compiler warnings because it's unsafe to call from managed code.
3. I suppose there's a better approach, because the previous suggestions doesn't appear safe or robust.
I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
I am using asp.net 2005, and my deployement server is Windows Server 2003.
I am invoking a .bat (which executes some cmd) file from my asp.net page.
But the cmd prompt not getting invoked . the application is waiting for long time in Process.Start() and after some time i am getting asp.net time out error.
Note : a. Same application is working in another production server with windows 2003
b. i have checked with giving impersonation = true - It doesnt worked
c. I have checked with gsetting identity as 'Local System' , 'Local Server'in th eApplication pool of the IIS.
I'm using VS .NET 2005 in windows 7 and when I run my Web project it Appears the Error as Image bellows:
In my IIS 7 I haved setup all requirments for IIS7 as image bellow:
Im deploying my website onto my new server (windows 2003) from my local pc (windows 7) and my local homeserver (windows 2008) and have run in to a issue.
I have a process that starts up with the below code. It is passed a video file which gets converted.
System.Diagnostics.ProcessStartInfo StartInfo = new System.Diagnostics.ProcessStartInfo(Command, Parameters);
Them problem I have is on my new windows 2003 server it fails to work. No error or anything. Looking at the server and its taskmgr.exe I see the Process start but nothing happens.
Looking into it, everyone seems to say I need to have impersonate="true" in the webconfig which I do have, I currently have it set to the Administrator account which I use to log into remote desktop (I assume this is fine???)
<identity impersonate="true" userName="Administrator" password="********" />
This still doesn't work.. Looking in the taskmgr.exe the process is started with the username ="NETWORK SERVICE" ...
I tried to run my WebApp on my local machine today (nothing has changed on it) and I had the above error. I know my machine had a windows update recently (not sure if that has anything to do with it).
The error produces a big print out of css styles and html markup.
In the markup it also says "The requested page cannot be accecssed because the related configuration data for the page is invalid".
I am trying to run a sample WCF ADO.Net Data Sertice on my IIS, which give me message The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /testing_wcf_service/WcfDataService1.svc/Web Config File as
<?xml version="1.0"?>
<configuration>
<system.web>
[code]...
I was working away just fine on my ASP.NET 2.0 application (Win7 64 bit, IIS 7.5.76) when all of a sudden I get a pesky error message "Unable to start debugging on web server" when I start the app in Visual Studio. The error message (attached) is HTML text and is so long that I can't even get to the bottom of it to see what the punchline is. It happens with debug switched on and off.
View 3 RepliesI am trying to update an old VS 2003 Web project. I've worked on it plenty of times in the past on this machine with no issues, but for some reason now when I try to debug it I get the above error (Unable to start debugging the web server. Access is denied.) ANybody have any thoughts on what might cause this?
View 13 RepliesI get error message "Unable to start debugging on the web server" in Visual Studio 2010. I clicked the button and followed the related suggestions without success.
This happens with a newly created local ASP.Net project when modified to use IIS instead of Cassini (which works for debugging). It prompts to set debug="true" in the web.config and then immediately pops up the error. Nothing shows up in the Event Viewer.
I am able to attach to w3wp to debug. It works but is not as convenient as F5.
I also have a similar problem with VS2008 on the same PC. Debugging used to work for both.
I have re-registered Framework 4 (aspnet_regiis -i). I ran the VS2010 repair (this is the RTM version). I am running on a Windows Server 2008 R2 x64 box.
I do have Resharper V5 installed.