Configuration :: Unable To Start Debug On Webserver
Oct 2, 2010
While i am running my asp.net application , it show an message that Unable to start a dubug on webserver. Unable to Connect Webserver. Verify web server is running and that incoming Http request are not blocked by a firewall. My application is configured with local iis. Early it is working peoperly. Some time it wil not show when we edit iis property. But right now i can unable to proceed my application by running.
I checked some forum with post of same issue. But still my problem not get solution yet.
View 2 Replies
Similar Messages:
Jun 3, 2010
I'm using VS .NET 2005 in windows 7 and when I run my Web project it Appears the Error as Image bellows:
In my IIS 7 I haved setup all requirments for IIS7 as image bellow:
View 2 Replies
Jan 3, 2010
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 Replies
Jul 1, 2010
I have installed SQL Server 2008 at my machine.
When trying to debug....i am getting following message...
"Unable to start T -SQL Debugging. Could not connect to computer AMIT. The workstation service has not been started."
View 1 Replies
Aug 27, 2010
Code]....
for example it just starts notepadn my development pc i'm using Win7 and when i deploy the app onto my local IIS7 it works and i can call notepadWhen i run debug mode with VS2010 it works too!
View 2 Replies
Apr 13, 2010
I want to debug EditPanel.debug.js file of HTML Editor, but it never shows in VS 08 and Im sure it executes to that line.What I did to enable debuggingUnchecked both 2 checkboxes for disabling the debugging
Set ScriptMode="Debug"
Change following line
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.js")]
to
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.debug.js")]
View 3 Replies
Apr 24, 2010
I' ve been experiencing some serious problems with running my website.Everytime I click on the little green arrow to start debugging my website I get an error message in my browser.This problem occurs in every browser I use. Internet Explorer, Firefox, Google Chrome.I figured it had something to do with my internet settings, but they are exactly the same as the internet settings of a pc on which my website does run.Event installing Google Chrome without importing the settings from my primary browser (Firefox) has the same result.
The errors are:
Firefox: "The connection with the server was reinitialised during page load"
Internet Explorer: "The page cannot be displayed"
Chrome: "The page is unavailable. The page on http://localhost:PORTNUMBER/EventCompanion/Taak/Test/TestTaakEdit.aspx is probably disable temporarily or it has been permanently move to a new address."Even clicking with the right mouse button on an aspx page and selecting the "View in browser" option has the same result.The only thing that works is viewing the website in the internal browser provided by Visual Studio 2008.But that way I'm unable to debug, which is pretty enoying.
Running the website on an other pc works perfectly...
View 4 Replies
Dec 15, 2010
I have a website hosted in IIS 6 and I can't start the website after I stop it. I have to bounce the whole box just to start the website again. I don't see anything logged in the event viewer and I don't know what is causing it.
View 3 Replies
Jan 13, 2011
I have application developed in vs 2005, when i try to run it throws below error.
"Unable to start debugging on the web server. The underlying connection was closed: An unexpected error occurred on a send."
View 2 Replies
Dec 1, 2010
I'd installed newly Visual Studio 2010,and i want to create a new local website on my iis server and i follow these steps:
1-from my iis i create a virtual directory
2-in command promt i execute these commands:
aspnet_regiis -i
aspnet_regiis -ga aspnet
3-i go to VS2010 and create a new website (HTTP) and choose my created Virtual Directory has been built in previous step
Now if i do step 3 with framework 4 i don't have any problem but with framework 3.5 my website hasn't been run and says me : "Unable to start debugging on the web server.The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information."
View 2 Replies
Mar 12, 2011
I get the message asking me to set strat page before debug. I have set the start page but still get the error.
View 6 Replies
Jan 11, 2011
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
View 2 Replies
Jan 13, 2010
Not using Cassini, but IIS7 to run an ASP.NET app.
The debug behavior is flakey. Sometimes it works, sometimes it doesn't. I was able to step into the application start event in global.asax but sometimes I can't.
Sometimes VS2008 opens the published global.asax so I have two instances of global.asax opened in VS, the source and the published.
I reset the AppDomain and IIS and I can't put my finger on why this is happening.
To add, while it won't go into application start, I have an OnChangeEventHandler event - it does step into the event handler.
View 1 Replies
Jul 15, 2010
I have a web application which will send email when user changes his/her passwords and also some invitation emails from the webpage.I have used VS2008 to develop this application. On my development machine the emails are send using the provided credentials as follows:
[Code]....
View 8 Replies
Oct 28, 2010
I have designed a report for printing cards and am able to print it on my local machine but when i upload on the server, i can preview the report but when i click print through a pdf its coming out blank.
View 1 Replies
Jul 21, 2010
We recently migrated applications from one web server to another. Previously they could upload files to the server and if it already existed, it would over write with the new one.
Now I have to manually delete the file from the server so they can upload a new one. If I delete it they can upload a new one and even upload one to overwrite the one they uploaded. But only after I delete the "migrated" one.
All of the security is correct. ASPNET and IIS_WPG have permissions.
Da Code:
If System.IO.File.Exists(UploadLoc + Me.FileUpload_PDF.FileName) Then
System.IO.File.Delete(UploadLoc + Me.FileUpload_PDF.FileName)
End If
Me.FileUpload_PDF.SaveAs(UploadLoc + Me.FileUpload_PDF.FileName)
I get the dreaded "access to the file is denied"
Update: I find if I give "USER" modify rights it works, but that does not seem secure.
View 2 Replies
Nov 17, 2010
the codes given below only working on localhost but not on web server.
[Code]....
View 15 Replies
Aug 3, 2010
i m using ajax toolkit 3.0.30930.0 for asp.net 3.5 with vs 2008. it works fine while running on the local machine but while uplaoding on the web server produce following error in the webconfig file,custom error set to off
should i do some changes in web config file before hosting it to the server. i m using script manager from ajax extension rather than toolkit script manager
View 1 Replies
Aug 17, 2010
What is the best way to update a DB on a webserver without shutting down the website that is running on the server?
We want to do things like replacing tables, updating tables and so on, without shutting down the website. One can do everything one wants to by simply opening the webiste on a local instance of visual webdeveloper express (2008 for example). But as soon as the DB is opened in that program, the website looses contact to the database and is effectively down.
Is there another way to access the database wihtout having to shut it down?
Of course one could program such functions viwht asp.net, however, there are so many tasks to be done that it would be tedious to program a new function on an admin website each time. Is there a simple and direct way to change the DB?
View 5 Replies
Jun 3, 2010
how to upload a aspx website project to a webserver.
I have tried to test the website with the LocalHost, and it is working. The project has both aspx and html files linked inbetween. How can I upload the project to a webserver and test it with the URL address.
View 3 Replies
Sep 6, 2010
Is there any way to read configuration section group of IIS7 by using WebConfigurationManager o anything?
I tried to read the authorization section but WebConfigurationManager.GetSection() returns an 'IgnoredSection' instance.
This is what my code looks like...
authSection = WebConfigurationManager.GetSection("system.webServer/security/authorization", HttpContext.Current.Request.Path)
View 1 Replies
Sep 25, 2010
i am using the mail sending facilily in asp.net using system.net.mail and system.net.mime.my code is work fine on local host but show the followiing error on webserver as exception
[Code]....
View 3 Replies
Jun 15, 2010
I installed Visual Web Developer Express 2010 and - after that - I realized that my Remote WebServer did not have the FramWork 4.0. So, I uninstalled VWD 2010 and its Framework 4.0 and re-install VWD 2008 and Framework 3.5. So, I've done my ASP.NET application on that Framework 3.5. Unfortunatelly, everytime I've tried to publish the files remotelly, I get the error bellow. What should I do to solve that?
[Code]....
View 3 Replies
Apr 16, 2010
I'm quite new to ASP and I can't seem to figure out how to get the application/website to work properly on my webserver. The first thing I had done was to build the solution, shortly followed by 'build website' and at last, to 'publish website'. It saved the files to C: -> Documents -> MS VS -> Projects -> My website.
There, the following files are found:
Account [folder]; App_Data [folder]; Scripts [folder]; Styles [folder]; bin [folder]; Web.config; Site.master; Default.aspx; About.aspx and PrecompiledApp.config.
I then uploaded these via FTP to my webserver and accessed the appropriate URL. Seems nothing showed up in root beside "Index of/". When I tried to access /Default.aspx, nothing but text appeared (which would be the code displayed in Default.aspx).
I've also read some tutorials regarding this matter where they instructed me to upload directly from Visual Studio to the FTP server, but I'm kind of afraid that it'll delete everything in said folder, as I don't know what the structure of said direct upload should be like.
View 2 Replies
Jul 28, 2010
I need to be able to create and manage users and what sites they can access in IIS. For instance, I dont want user A touching user B's site.
I do not want to enable users to log in to the webserver via remote desktop.
View 5 Replies
