Installation :: Unable To Start Debugging On The Webserver?
Jun 3, 2010I'm using VS .NET 2005 in windows 7 and when I run my Web project it Appears the Error as Image bellows:
In my IIS 7 I haved setup all requirments for IIS7 as image bellow:
Similar Messages:
Iis7 - Unable To Start Debugging On The Web Server - Couldn't Start Debugging VS 2010 - II7 - Win 7 X64
Jan 11, 2011I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
Installation :: IIS - VS2010 - Configuration Error "Unable To Start Debugging On The Web Server"
Dec 1, 2010I'd installed newly Visual Studio 2010,and i want to create a new local website on my iis server and i follow these steps:
1-from my iis i create a virtual directory
2-in command promt i execute these commands:
aspnet_regiis -i
aspnet_regiis -ga aspnet
3-i go to VS2010 and create a new website (HTTP) and choose my created Virtual Directory has been built in previous step
Now if i do step 3 with framework 4 i don't have any problem but with framework 3.5 my website hasn't been run and says me : "Unable to start debugging on the web server.The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information."
Visual Studio :: Unable To Start Debugging On The Web Server / Debugging Failed Because Integrated Windows
Jun 3, 2010I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesVisual Studio :: How To Turn Off Remote Debugging 2010 / Unable To Start Debugging On Web Server
Mar 7, 2011I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
Configuration :: Unable To Start Debug On Webserver
Oct 2, 2010While i am running my asp.net application , it show an message that Unable to start a dubug on webserver. Unable to Connect Webserver. Verify web server is running and that incoming Http request are not blocked by a firewall. My application is configured with local iis. Early it is working peoperly. Some time it wil not show when we edit iis property. But right now i can unable to proceed my application by running.
I checked some forum with post of same issue. But still my problem not get solution yet.
Visual Studio :: Unable To Start With Or Without Debugging
Nov 22, 2010I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
Unable To Start Debugging IIS 7.5 Detailed Error - 500.19?
Sep 22, 2010I tried to run my WebApp on my local machine today (nothing has changed on it) and I had the above error. I know my machine had a windows update recently (not sure if that has anything to do with it).
The error produces a big print out of css styles and html markup.
In the markup it also says "The requested page cannot be accecssed because the related configuration data for the page is invalid".
VS 2005 - Unable To Start Debugging On Web Server
Nov 13, 2013I was working away just fine on my ASP.NET 2.0 application (Win7 64 bit, IIS 7.5.76) when all of a sudden I get a pesky error message "Unable to start debugging on web server" when I start the app in Visual Studio. The error message (attached) is HTML text and is so long that I can't even get to the bottom of it to see what the punchline is. It happens with debug switched on and off.
View 3 RepliesUnable To Start Debugging The Web Server. Access Is Denied?
Dec 8, 2010I am trying to update an old VS 2003 Web project. I've worked on it plenty of times in the past on this machine with no issues, but for some reason now when I try to debug it I get the above error (Unable to start debugging the web server. Access is denied.) ANybody have any thoughts on what might cause this?
View 13 RepliesVS2010 Error: Unable To Start Debugging On The Web Server
May 20, 2010I get error message "Unable to start debugging on the web server" in Visual Studio 2010. I clicked the button and followed the related suggestions without success.
This happens with a newly created local ASP.Net project when modified to use IIS instead of Cassini (which works for debugging). It prompts to set debug="true" in the web.config and then immediately pops up the error. Nothing shows up in the Event Viewer.
I am able to attach to w3wp to debug. It works but is not as convenient as F5.
I also have a similar problem with VS2008 on the same PC. Debugging used to work for both.
I have re-registered Framework 4 (aspnet_regiis -i). I ran the VS2010 repair (this is the RTM version). I am running on a Windows Server 2008 R2 x64 box.
I do have Resharper V5 installed.
Security :: Error:Unable To Start Debugging On The Server?
Nov 19, 2010I am trying to run my application on IIS 7 and Windows Vista Home Premium. I am getting the following error "Debugging failed because Integrated Windows Authentication is not enabled". How do i resolve this issue?
View 4 RepliesVisual Studio :: Error While Trying To Run Project : Unable To Start Debugging On The Web Server
Aug 2, 2010When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
Visual Studio :: An Error "Unable To Start Debugging On The Web Server?
Aug 6, 2010I am getting an error "Unable to start debugging on the web server..." while running as web application in VS2005. But the error seems only for this application. I created a test application, both in VS2005 and VS2008, and found no issues in running these applications.
View 1 RepliesVisual Studio :: Unable To Start Debugging On The Web Server At 2005/Window 7?
Jun 16, 2010I used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to
build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
Configuration :: Unable To Start Debugging On The Web Server - Unexpected Error Occurred On A Send
Jan 13, 2011I have application developed in vs 2005, when i try to run it throws below error.
"Unable to start debugging on the web server. The underlying connection was closed: An unexpected error occurred on a send."
Unable To Start Debugging On The Web Server. The COM+ Registry Database Detected A System Error
Feb 26, 2010I'm trying to debug an ASP.NET webapp that's configured to "Use Local IIS Web Server" on WinXP. When I start the debugger, the compile succeeds, and then the following error is displayed in a dialog:
Unable to start debugging on the web server. The COM+ registry database detected a system error
The webapp never launches in my browser. How can I get rid of this message and debug this webapp?
Visual Studio :: Unable To Start Debugging On The Web Server. The IIS Worker Process For The Launched URL Is Not C?
Jul 19, 2010Unable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)
Installation :: Error While Trying To Run Project - Unable To Start Debuging
Oct 17, 2010I installed vs2003.net on sbs2003 with IIS6 (.net framework 1.1) I created my first app, put a label on webform1 and run the project (debug)
1 - messagebox: "Error while trying to run project: unable to start debugging on the web server. The project is not configured to be debugged (I did a lot of searching, found tons of so-called solutions, but neither works)
2 - run the project from the menu Start without debugging. I got a server-error: <authentication mode = Windows in web.config)
Two questions:
a. when the app runs under VS.2003 it uses IIS ?
b. if not, why doesnot run the app ? if so, which website it uses in the IIS-manager (is that the Default website or other ?). What happens when I delete all the websites in IIS-manager and run the app in VS2003 ?
Unable To Start Debugging On The Web Server - The Web Server Is Not Configured Correctly
Sep 30, 2010I am having issues debugging locally within Visual Studio 2010 on Server 2008 R2 (x64) for a new ASP.Net MVC application. I am able to debug using the VS Development Server (Cassini) but when I change to use the Local IIS Web Server and Create Virtual Directory, I am unable to debug. I get the standard VS message:
"Unable to start debugging on the web server. The web server is not configured correctly. ..."
Everything looks standard in IIS. The Default Web Site is running under the ASP.NET v4.0 application pool. The virtual directory that Visual Studio created is running under the same app pool. I am running Visual Studio as the Administrator account. It feels like some security setting or something is preventing this to work but I'm at a loss to what it could be.
Visual Studio :: Getting "unable To Start Debugging On The Web Server" Error In VS2010 Targeting 4.0 Framework
Aug 11, 2010I am getting this error, without any further details, when attempting to debug my ASP.Net project in VS2010. There are other developers using the same tools and code who are not having this problem therefore I know the problem is not in the web.config file. I have found several suggestions when googling the issue and tried them all to no avail. I uninstalled and re-installed VS2010 along with the .Net 4 framework. I made sure Anonymous as well as Windows authentication is enabled in IIS. I uninstalled and reinstalled IIS. I am at a loss. I can attach to the process and debug the ASP.Net code that way, but what I really need to be working on is a Silverlight app that is called from the ASP.Net and the breakpoints don't work in Silverlight when I attach to the process manually.
View 3 RepliesIncorrect "Unable To Start Debugging - Attach To Worker Process" Message In Delphi 2007
Feb 2, 2010I have seen this for a long time, and finally decided to put the question up here. I have some applications that I need to maintain that were written in Delphi 2007 for .NET (ASP.NET 2.0). Normally, the first time I run the application (using IIS) I get the classic "Unable to start debugging on the web server. Unable to attach to ASP.NET worker process" message. I simply press F9 (run) again, and it runs. Sometimes I have to try running several times before it will actually run. I am running Windows 7 64-bit (and have seen the same effect on Vista 64-bit). I do have IIS configured for ASP.NET, and I do have the following code in my Web.config file.
<system.webServer>
<modules>
<add name="DbgConnect" type="Borland.DbkAsp.DbkConnModule,Borland.dbkasp,Version=10.5.0.0,
Culture=neutral, PublicKeyToken=b0524c541232aae7" preCondition="managedHandler" />
</modules>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
The point is that I eventually can run the application in the debugger, sometimes even on the first try. Many times when I get the failure it happens about 15 seconds or so after I press Run, sometimes even after I've hit a page or two (or three) of the Web app. And, yes, when Delphi gets into this mode, I can simply run without debugging, and all is fine (unless I really want to debug). And, I can just keep on trying to run in the debugger and eventually it will just work.
It appears that Delphi's .NET debugger is somehow getting the idea that the application cannot run, and then gives up and stops the process (which as I've mentioned is sometimes clearly running). I know of other developers who have also seen this behavior. My question is, does anyone know how to stop this annoying behavior?
Visual Studio :: Unable To Start Debugging "Auto - Attach To Process (8360) W3wp.exe On Machine DELL Failed" - 2008
May 10, 2010suddenly, with my Visual Studio 2008 I can no longer debugging my web applications (ASP.NET 3.5). I obtain this error: Unable to start debugging on the web server. Click Help for more information. Auto-attach to process [8360] w3wp.exe' on machine 'DELL' failed. The weird thing is that I haven't done special changes to my IIS.
View 1 RepliesForce A New Start Of "Cassini" When Start Debugging A New Instance Of Web Application?
Feb 25, 2011In our ASP.NET application we perform some initializations upon the Application Start event.When the application is started in visual Studio 2010 with 'Debug->Start new instance' the ASP.NET Development server does not start new, and my Application's Start event is not fired.My workaround is to manually stop the development server - is there a setting to force this automatically?
View 1 RepliesProject Loads Twice Upon Start Without Debugging?
May 28, 2010When I run my project from Visual Studio, my webpage comes up normally, and about 5-10 seconds later, a duplicate one appears as well. (not that hard to close the second one) I just thought I'd ask if anyone knows why it would do this.
By the way: It only seems to do this when I already have a browser window open (not including my project's webpage browser window).