Configuration :: WebForms Routing In 4.0 Multiple Parameters?
Oct 18, 2010
Simple enough I have a search feature I am wanting to impliment Routing for.Here is the routing table for it.
[Code]....
Now I want to set the postback URL for a linkbutton to go to the search page with all parameters filled in but the last one or for that matter any one of the parameters to be left blank
[Code]....
You will see in this example I left the very last one blank. Now when I do that the link does not work. If I fill in all attributes it does workso can anyone tell me how to work around this issue?
I want to add optional parameters in my routing table.For example I would like the users to browse a product catalog like this:http://www.domain.com/browse/by-category/electronics/1,2,3 etc
I would like to make a single app to handle the requests coming from the above URLs.Most of the scenarios I have found point to having url routing based on a single domain and multiple web pages.
How can I pass two querysting parameters in URL routing using ASP.NET 4.0? I have gone through many articles, but everywhere it shows only one parameter. I'd like the display URL to be: [URL] The first parameter is ID: 1 The second is Name: This is my first report I am trying following route, but it is not working
routes.MapPageRoute( "MarketReports", // Route name "Reports/{*i}-{*n}", // Route URL "~/pageControl2.aspx" // Web page to handle route );
I'm trying to implement a search function on an incident logging page that is working fine. Currently I am only able to search against one criteria at a time, using the following route:
I have a completed app running in a QA environment. Everything works fine under most circumstances.If you hit a plain URL (no identifying information in the URL), you see an intro page with a button (generated by an asp LinkButton control) that posts back and directs you to another page. The markup looks the same when it fails and when it doesn't.
When such a URL is followed from, e.g., Word and the default browser is IE, the intro page loads fine, but clicking the button causes an error. When not debugging, this behavior occurs every time. While debugging, the error occurs only ~ 1 in 10 times (closing the browser instance and starting over every time).When the error occurs, the intro page Page_Load fires and IsPostBack is false. Somehow, instead of a post, a get is being issued.
When I run fiddler to try to analyze the actual calls (can't use firebug because it never happens using Firefox), everything works every time.I don't know whether this issue has anything to do with routing, and I've no idea even what to look at next. The strange thing is, when I debug, the intro page doesn't fully load every time. Only about 1 in 3 times does it fully load even if I've just cleared browser cache. When I run it through fiddler, it fully loads and works fine every time.
How would you accomplish these in ASP.NET Webforms 4.0 Routing;.aspx pages should not be accesible directly, pages should be accesible only with routes, Start page should be "/" or "/home" or something else, but not "Default.aspx".
If you cannot turn on wildcard mapping for IIS (shared hosting) or can't be bothered (lazyness) can you still use ASP.Net routing if your routes end in one of the "known" asp.net extensions...like ending all routes with .ashx, .aspx etc?
From Chris Cavenagh's blog, could his examples of:
[code]...
I'm presuming so as his last route is Default.aspx, but he hasn't included any route data with that...Is there a better way? Provided this works, it looks like the best as if the application is moved or wildcard mapping can be turned on, only the routes need to change...
I'm using routing to keep my site backwards compatible for our clients, while make my project organized.
I'm also thinking of moving our encrypted query string to a more friendly url. How this works is our clients have to bookmark a huge encrypted url to prevent them from guessing our other clients by changing an id around.
But instead of having this huge url, wanted to add a route like LoginClientName.aspx for each client and have the encrypted query string hard coded or maybe in database.
But don't see a way to add a query to the MapPageRoute..
Was thinking of something like this (know it doesnt work)
I have an ASP.NET web application(webforms,not MVC) developed in VS 2008 and i have implemented ASP.NET web forms URL routing by following this link [URL]
It works pretty good when i run it on the Visual studion IDE.But does not works when i created a site under my IIS (IIS 5.1 in XP) and deployed the same files there.I have set ASP.NET version as 2.0 in the Properties window of my application too.But does not work.
I'm going through my apps and carving out as many querystring URLs as possible by using Routing instead.For our product catalog,we have many product categories that have characters like ampersands and slashes in them which don't go over to well when used in a URL.
I'm currently using Page.GetRouteUrl in my databound objects to create URLs like "~/catalog/My Category", which gets encoded to "~/catalog/My%20Category", so I used string.replace to smooth that into "~/catalog/My_Category".
But then, as mentioned, I have categories with commas, ampersands, slashes, quotes, &c.,
My question: is there a general way to easily deal with these characters in route keys, or do I need to develop a list of URL-friendly characters to use and replace all of the ugly ones, then un-replace them when I'm passing the route data to my LINQ statements?If that's so, then I can't use <asp:RouteParameter /> in declarative markup.
I've implemented WebForms Routing (using ASP.NET 3.5 SP1) and have a routed page that uses the AJAX Control Toolkit Slider control. The handle image doesn't always display, depending on the depth of the URL. I believe it may be something to do with the image being and embedded resource accessed via webresource.axd.
For example:
www.myapp.com/tours - will display the handle image www.myapp.com/tours/london - doesn't display it.
My routing is configured as such:
[Code]....
On viewing the HTML source the actual image is rendered as:
[Code]....
Been hitting my head against a brick wall with this for days?
I am using Visual Studio 2010 and ASP.NET 4.0 to build a WebForms project that uses the new routing features in System.Web.Routing. When I build my solution and run it from within VS.NET's debugging environment only routes with RouteUrl's that include a ".aspx" extension are being properly routed to the PhysicalFile. It appears requests made to other URLs are not being "detected" by the routing engine for processing. In the case below, "Scenario1" shows a 404 and "Scenario2" works properly.
I consider the following an error, and not a feature:
When posting a request, any parameters are held in the HttpContext.Request.Form as key/value pairs. This is perfectly fine for the recipient of the request. Unfortunately, however, further down the chain these values still exist and take precedent in binding over new parameters created during processing.
This is obvious in the RenderAction scenario. If a new parameter is created in a view and passed through RenderAction, if the parameter has the same name as one of the initial request parameters (or a form field for that matter), then MVC Binding will bind the initial request form value to the Action being called, and not the new parameter being defined in the RenderAction call. What's even more frustrating, is there is no easy way to override the initial form values.
It really does not make sense that a value defined in one context, should live throughout the entire processing context... at least without the developer being able to determine it should remain. At a minimum, any new parameter defined in the process with the same name should either a) be received as a parameter and not a form value; or b) override the form value.
I would like to be able to type in a URL like [URL] arrive at a Details Page which parsed the "M" and the "123" from the query string and used them as params to query a Table in my Database. I've been reading my @$$ off and I can't find anything close :>
I need to use routing with parameters in my ASP.NET application.
public class Global : System.Web.HttpApplication { void Application_Start(object sender, EventArgs e)
Then, by navigating to "/Profile" I want to get on Page_Load method Request.Params["Id"] as null and by navigating to "/Profile/1", Request.Params["Id"] as "1".
I have a controller method that is called with many different combinations of URL's. To overcome issue i am using optional parameters.here is my controller method signature...public ActionResult localMembersSearch(string Gender, string calling, [Optional]string Region, [Optional]string County, [Optional]string Town, [Optional]string queryvalues)the first two parameters are not optional but always expect
I've already implemented URL routing in my app but there are cases where I may or may not get a paramter. In particular, I'm trying to come up with a good way to handle multi-language support. For example, if my regular URL is /SomeCategory/Friendly-Topic-URL, I want to have an optional language selector at the end but I'd like to be optional. So, if I get /SomeCategory/Friendly-Topic-URL/es, that should bring up the topic in Spanish but if get nothing, that should bring up English.
i have a report and i want to display it on a webform. Reports without parameters are working nice and fine. Reports with parameters are creating headache for me. this is the code i have written in BindReport method, which is called on page load event of the form.
[Code]....
i have tried variety of things like assigning ParameterFieldInfo to reportviewer control but, it shows me prompt on page load asking for parameter values of the report. i m using .NET 4.0 EDIT i m using push model for crystal reports. does it change the way we can pass parameters to report from asp.net
When I want to get the output values its okay but I also want returning a table as a result data.But Datareader has no rows.is it possible if I want a returning query result and multiple output values togather ?I wrote a test above.I can get output values as sqlparameters. But Datareader attached to a Gridview is empty.can you detect whats wrong here and it doesnt return a query result.So stored procedure is not standart or ı am doing something wrong.this doesnt raise any exception.but not returning any data.
