Visual Studio 2010, WebForms Routing Not Working In IDE Debug Mode - Getting 404
Oct 26, 2010
I am using Visual Studio 2010 and ASP.NET 4.0 to build a WebForms project that uses the new routing features in System.Web.Routing. When I build my solution and run it from within VS.NET's debugging environment only routes with RouteUrl's that include a ".aspx" extension are being properly routed to the PhysicalFile. It appears requests made to other URLs are not being "detected" by the routing engine for processing. In the case below, "Scenario1" shows a 404 and "Scenario2" works properly.
I got a problem regarding CSS in my pages. I managed to apply styles to my page using css and everything looks fine in the Design view. I ran it on IE8 and everything is working fine. Now after I returned to Visual Studio, added some rules to my CSS, and noticing that everything is working fine in the Design view, I ran it again in IE8 and nothing has changed. The rules I added was ignored and it looks the same. I ran it on Firefox and Google Chrome and it's working fine.
But if I ran my project in IE8 through IIS7.5, everything is working fine so it means, the problem is within visual studio 2010.
I'm running ASP.NET on Visual Studio 2005, and I am not able to step through my break points when I run my application in "Debug" mode. I set the break points, run the application, and Visual Studio simply ignores them.I have gone through all of the configuration settings and project properties to see if their is something obvious that needs to be turned "on" - but I don't see anything.What would be the most logical settings or references to look at?
I am using vs2008 sp1. I am building web site with aspx. I am also using an ajax control. My Site was working normally. I could run it from f5 and it would stop at a debug point. I added an additional aspx page. Then I got a strange error. When I pressed f5 a message box appeared saying that I had not made this version with the debug option. Then from reading an internect post I disabled only my code. That got rid of the message box error but now the debugger does not stop at any break point? Of course this happen when I need to go live with this project in a day.
I am developing a web site in Visual Studio 2008. I have a project for the web application and several class libraries as references. When I add the references I select the file under bin/debug in the class library folder. When changing the project to release mode the references still point to the .dll in the debug folder. Shouldn't this change automatically. How should I add the references so that debug and release are properly referenced?
We all know that we should only be publishing our ASP.NET Web Applications with release build type, so why do I not get a warning when I trigger the "Publish" command in Visual Studio 2008, for a project configured to build in debug mode? Sure, there might be cases where I need to publish a debug build to a development or test environment, but answering yes in a confirmation dialog would be acceptable in these cases. Is there an option that I have overlooked, forcing Visual Studio to warn me every time I try to publish a debug build? Yes, we could just ban using the "Publish" command and use a more solid build management tool, but this involves a change of process and right not be an option in this particular case.
There are plenty other similar static methods defined within the class.
When does it fail: ONLY when the solution is compiled in 'DEBUG' mode. Everything works fine in 'RELEASE' mode.
What have I already tried:
1. Including a static constructor inside 'Utility' class - FAILED
2. Marking 'Utility' class with 'static' keyword: FAILED
3. Changing platform target from 'Any CPU' to 'x64': FAILED
As highlighted above, the issue is really not with VerifyPassword() method per se. Rather it is with the instantiation of 'Utility' type. That's why an exception is thrown from the constructor. Since 'VerifyPassword' is it is the first static method called, it appears in the stack. Just for the sake of proving that, I removed the call to VerifyPassword and returned 'true' instead. That way I was able to login to the application (no password verification), but failed at a later stage where I had called the Utility class on another method, namely Utility.ValidateSKUAdjustment(txtCurentMonthM1.Text).
This is weird: When I try to debug ASP.NET web application, Visual Studio 2010 gives me this message "Script debugging of your application is disabled in Internet Explorer", but in my IE 7 (Internet Options --> Advanced), both "Disable Script Debugging" checkboxes are not checked.
When I am actively developing it is extremely cumbersome to write some code, fire up the debugger to test said code, wait a minute for the debugger to start, look at the page in the browser, stop the debugger, edit the code, rinse, lather, repeat. I can get around that by using CTRL-F5 and CTRL-SHIFT-B during development but I lose all the benefits of the debugger. Is there a better way to use the debugger, or something else I can do to get quick rebuilds and use of the debugger? I/we do write unit tests, but you also need to test your app in the browser so please no "you shouldn't have this problem if your unit tests were written properly"
I am having a hardtime script debugging in VS2010 and IE8. I am using .net 4 framework.When i try to make a break point in my client script in VS2010, i get the respond "This is not a valid location for a breakpoint". Then I have tried to use IE8 Developebar, but when i try starting the script debugger it throws an alert, and tell's me that it couldent attatch to the process, because there may be another debugger attatched to the process.
Platform : Visual studio 2010 and mvc 2 In mvc application I used update panel, I am getting following error Sys.WebForms.PageRequestManagerParserErrorException I have tried all of these1. EnableSessionState="false" ValidateRequest="false" EnableEventValidation="false" 2. EnableSessionState="false" ValidateRequest="false" EnableEventValidation="false" but error is occured again but when try this 3. asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="false"/>When I take enablepartialrendering="false" it does refersh page.
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
I've run into a particularly nasty bug where an ASP.NET website attempts to make a call to a WCF service method that sends IIS into a death spiral...that ultimately brings down the associated app pool. It never gets to our log4net code that outputs unhandled exceptions.I was watching w3wp.exe processes spin up and die, so I figured I'd take a dump file on termination using ProcDump from SysInternals using the following command
I am trying to debug a project, suddenly I'm running into an issue where enumerating any object collections results in a timeout if I try to view it.If I run the program normally I have no issues. If I try to view any collection, such as a list, I get a timeout error and the whole thing bombs out.I thought something might be going on with one of my more complex collections so I tried creating just a normal list of strings as follows...
List<string> blah = new List<string>{"fsdf","fsdg","Gt","gsersg","ser","gersgxdrsd"};
Is there a way to know what parameters are needed by an event in Visual Studio 2010?Let's say I have a DropDownList control and I want to bind a method to the "OnSelectedIndexChanged", I would do something like thisn the ASPX File:
I recently upgraded from VWD 2008 Express to VWD 2010 Express. A problem has developed in that the website's graphics no longer appear in Design mode, there are "Error Creating Control" error messages that did not exist before, and also debugging errors that did not exist before. (Note: these problems did not exist when I first used VWD 2010; they may have originated with recent automatic Windows updates (I use Vista Home Premium SP2 with IIS 7)). The problem exists if I open the website either as a project file or as a website directory.
After I imported a VS 2008 web project to VS 2010, I can't view aspx pages that have master pages in design mode. The page design mode displays "error creating control - contentplacehoder1 object reference not set to an instance of an object." The project builds and runs fine though. I have only one master page that all other aspx pages reference and I don't have any nested master pages.
I installed Visual Studio 2008 in my machine. Both c# and vb.net are working properly, but my problem is asp.net is not working. If we are taking a new website project there is no design mode in default.aspx means at the bottom there is no design, source, split. If we go to View->Design then one error message is popup that there is no editor available for this Default.aspx. Again in Tools->Options->Html Designer will shows that an error occurred loading this property page. My OS is Windows Xp Professional 2002, IIS is also checked on .I don't know what to do.....
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.