I want to add optional parameters in my routing table.For example I would like the users to browse a product catalog like this:http://www.domain.com/browse/by-category/electronics/1,2,3 etc
routes.MapPageRoute(
"ProductsBrowse",
"browse/{BrowseBy}/{Category}",
"~/Pages/Products/Browse.aspx"
I have a controller method that is called with many different combinations of URL's. To overcome issue i am using optional parameters.here is my controller method signature...public ActionResult localMembersSearch(string Gender, string calling, [Optional]string Region, [Optional]string County, [Optional]string Town, [Optional]string queryvalues)the first two parameters are not optional but always expect
View 1 RepliesI've already implemented URL routing in my app but there are cases where I may or may not get a paramter. In particular, I'm trying to come up with a good way to handle multi-language support. For example, if my regular URL is /SomeCategory/Friendly-Topic-URL, I want to have an optional language selector at the end but I'd like to be optional. So, if I get /SomeCategory/Friendly-Topic-URL/es, that should bring up the topic in Spanish but if get nothing, that should bring up English.
View 6 RepliesI'm trying to implement a search function on an incident logging page that is working fine. Currently I am only able to search against one criteria at a time, using the following route:
View 2 RepliesSimple enough I have a search feature I am wanting to impliment Routing for.Here is the routing table for it.
[Code]....
Now I want to set the postback URL for a linkbutton to go to the search page with all parameters filled in but the last one or for that matter any one of the parameters to be left blank
[Code]....
You will see in this example I left the very last one blank. Now when I do that the link does not work. If I fill in all attributes it does workso can anyone tell me how to work around this issue?
I want to define a route that have 2 optional parameters in the middle of the URL the start an end parameters are digits
[Code].....
I'm starting a port of an existing ASP.NET Web Forms CMS to ASP.NET MVC and want to get the routing right from the start.Note: it isn't important to have the exact same URL structure.I think this answer is close to what I'm looking for but would like some additional input should anyone have it.
?Content=News/CurrentNews/This_is_a_news_article
?Content=Corporate/About_Us/Overview
[code]...
I would like to have two different welcome pages for a site.How could I handle this? I've looked at routing but I'm not sure if global.asax.cs is the correct place to place this into.
www.mycompany.com should display generic information. Displaying view Home/Default.aspx
www.mycompany.com?id=1 should display welcome customer x. Displaying view Home/Welcome.aspx
I have an MVC action on my abstract BaseControlller like this (and this action is common across all inheriting controllers):
//
// GET: /controller/RenderForm/{formType}
[Authorize(Roles = "Administrators")]
public ActionResult RenderForm(FormType formType, BaseContentObject contentObject)
[code]...
I want to create a method with optional parameters in my wcf service. I am doing it like this
[Code]....
When I try to use it in my client application and try to pass the values only for first two parameters it gives me an error that"Argument not sepecified for parameter Status"
I'm using the iis7 URL Rewrite module and it's working fine, except for two things. Being new to this, I might be missing something obvious.
1) My URL gets converted from www.mysite.com/search.aspx?fName=John&sName=Smith to www.mysite.com/John/Smith. This works fine, but if I add a trailing / , a few images on the site disappear, wheras a few don't. (They're all in the same location). However, the search results are fine.
2) Is it possible to make cerain querystrings optional? Server side, this is implemented (i.e. if nothing is entered, then assume a default value). But how would this work with the URL rewrite module? e.g. www.mysite.com/John would search for John and use a default value for the sName parameter.
I have the following JSON class I am intending to use to perform management calls on my database asynchronously:
<script type="text/javascript">
var CalendarManager = {
defaultOptions: {
staffcode: 0, // required
date: 0, // required
[Code]....
Basically, my question is: how do I specify optional parameters to a WebMethod when providing JSON data?
I know I can reduce the parameters down to just the required values, and then use HttpContext.Request.Params to read the values of optional paramaters, but I would have thought the way I have tried here should have worked.
EDIT
The XMLHttpRequest.responseText value for the error is:
Invalid JSON primitive: staffcode.
This is throwing me even more off the scent of the problem :(
I have a GridView bound to an DataSource query with parameters tied to form controls.What is the standard / best-practices way to handle optional query parameters?
View 3 RepliesI get a 404 error when I navigate to the following URL using the route below:
http://localhost:53999/properties/
However, all the following are correctly routed to the List action in my controller:
http://localhost:53999/properties/usa/new-york/manhattan/12
http://localhost:53999/properties/usa/new-york/manhattan
http://localhost:53999/properties/usa/new-york
http://localhost:53999/properties/usa [Code]....
In PropertiesController.cs: [Code]....
It looks like it should just go to the default controller/action,
I'm creating a webpage with serveral web controls to set search parameters for querying an SQL table. My plan is to use a TableAdapter to hold the query. If the user decides not to use one, several, or any of the web controls to filter their search, I want the SELECT to execute without complaining that it doesn't have parameter values. Should my SQL query look like
[Code]....
I have a data grid with a lot of information on it - to easily filter the data, I would like to be able to pass parameters to it. My problem is that I do not want the parameters to be required. So if I just put 1 or 2 of them in the query string, I would like for it to return all of the data related to those two parameters.I am using a data grid & stored procedures:My Stored Procedure looks like this:
[Code]...
I have a completed app running in a QA environment. Everything works fine under most circumstances.If you hit a plain URL (no identifying information in the URL), you see an intro page with a button (generated by an asp LinkButton control) that posts back and directs you to another page. The markup looks the same when it fails and when it doesn't.
When such a URL is followed from, e.g., Word and the default browser is IE, the intro page loads fine, but clicking the button causes an error. When not debugging, this behavior occurs every time. While debugging, the error occurs only ~ 1 in 10 times (closing the browser instance and starting over every time).When the error occurs, the intro page Page_Load fires and IsPostBack is false. Somehow, instead of a post, a get is being issued.
When I run fiddler to try to analyze the actual calls (can't use firebug because it never happens using Firefox), everything works every time.I don't know whether this issue has anything to do with routing, and I've no idea even what to look at next. The strange thing is, when I debug, the intro page doesn't fully load every time. Only about 1 in 3 times does it fully load even if I've just cleared browser cache. When I run it through fiddler, it fully loads and works fine every time.
How do I get the virtual url and not the webforms page name that the url is mapped to when using System.Web.Routing with webforms.
I want the url "/confirm/5" and not "Confirm.aspx".
In my stored procedure I have declared some parameters as NULL values(Optional Parameters).
In my C#.NET code I didn't use the parameters to pass values to Stored Procedure's NULL
Parameters. So I am getting Exception.
I don't want to pass parameters from my code.Because I have declared 30 parameters in my
Stored Procedure as NULL values.
Is there any other way to execute Stored Procedure from Front End without passing values to
Optional Parameters in SQL stored procedure?
How would you accomplish these in ASP.NET Webforms 4.0 Routing;.aspx pages should not be accesible directly, pages should be accesible only with routes,
Start page should be "/" or "/home" or something else, but not "Default.aspx".
If you cannot turn on wildcard mapping for IIS (shared hosting) or can't be bothered (lazyness) can you still use ASP.Net routing if your routes end in one of the "known" asp.net extensions...like ending all routes with .ashx, .aspx etc?
From Chris Cavenagh's blog, could his examples of:
[code]...
I'm presuming so as his last route is Default.aspx, but he hasn't included any route data with that...Is there a better way? Provided this works, it looks like the best as if the application is moved or wildcard mapping can be turned on, only the routes need to change...
Can Asp.Net 4 Webforms handle url routing for differing domain names?
Ex.
www.abc.com
www.admin.abc.com
www.domainname.com
www.admin.domainname.com
I would like to make a single app to handle the requests coming from the above URLs.Most of the scenarios I have found point to having url routing based on a single domain and multiple web pages.
I'm using routing to keep my site backwards compatible for our clients, while make my project organized.
I'm also thinking of moving our encrypted query string to a more friendly url. How this works is our clients have to bookmark a huge encrypted url to prevent them from guessing our other clients by changing an id around.
But instead of having this huge url, wanted to add a route like LoginClientName.aspx for each client and have the encrypted query string hard coded or maybe in database.
But don't see a way to add a query to the MapPageRoute..
Was thinking of something like this (know it doesnt work)
routes.MapPageRoute("MapClient1", "LoginClient1.aspx", "Login.aspx?secure=mylongquerystring");
routes.MapPageRoute("MapClient2", "LoginClient2.aspx", "Login.aspx?secure=differentmylongquerystring");
Now this throws exception since it doesn't allow a ? in url
I have an ASP.NET web application(webforms,not MVC) developed in VS 2008 and i have implemented ASP.NET web forms URL routing by following this link [URL]
It works pretty good when i run it on the Visual studion IDE.But does not works when i created a site under my IIS (IIS 5.1 in XP) and deployed the same files there.I have set ASP.NET version as 2.0 in the Properties window of my application too.But does not work.
I'm going through my apps and carving out as many querystring URLs as possible by using Routing instead.For our product catalog,we have many product categories that have characters like ampersands and slashes in them which don't go over to well when used in a URL.
I'm currently using Page.GetRouteUrl in my databound objects to create URLs like "~/catalog/My Category", which gets encoded to "~/catalog/My%20Category", so I used string.replace to smooth that into "~/catalog/My_Category".
But then, as mentioned, I have categories with commas, ampersands, slashes, quotes, &c.,
My question: is there a general way to easily deal with these characters in route keys, or do I need to develop a list of URL-friendly characters to use and replace all of the ugly ones, then un-replace them when I'm passing the route data to my LINQ statements?If that's so, then I can't use <asp:RouteParameter /> in declarative markup.
