After publishing the console application. We changed few connection strings related values in the app.config file, but the values changed is not been reflected in the published version.
What might be the cause for not reflecting the values which has been changed ???
I have a web.config file defined in my asp.net web application. I have many different settings configured there. I have another project, this time a console application. I'd like to read several configurations from my web.config file. How can this be done?
View 1 RepliesI have an application which has a website and a project. The project contains an executable file which I'm trying to run as a process from the website's Global.asax file's application_start(). When I run this application from localhost, everything runs smoothly but when I deploy the application on IIS, application_start's code is executed and I can see the process name in the taskmanager but I cannot see the window which the console application normally starts in (when i run the application on localhost) and neither is the code executed.
Here's what I'm doing:
-- copied website and project in wwwroot
-- made a virtual directory of the website
-- when i run the website, I see the process in taskmanager but the code is not executed.
I am new to deployment and IIS, and would really appreciate I someone could tell me what i'm missing
I want to create a business object from the console application for use with a control. here is my console application:
[Code]....
I have published my ASP.Net Web Application on remote IIS server using Project --> Publish options.
But I am not able to browse it.
My application runs quickly when debugging locally, but slows down to an almost unusable state once published. Oddly, the published version seems to be grabbing data very quickly from MSSQL - it's the part where I'm updating datatables and gridviews that is very slow. For example:
[Code]....
I check WindowsPrincipal.Identity.Name against Active Directory security groups before allowing the user to edit data. If the user is not authorized I just present a read-only version of the data.
When I run my web app from the IDE everything works fine. I published the web app, made sure anonymous access was disabled, and invoked it from IE. The read-only page came up.
I then added code to write to the event log to display the WindowPrincipal.Identity.Name and saw that instead of displaying the user name, it was instead showing the server name. I verified again that Anonymous Access is disabled and integrated security is on.
I have developed an webapplication with some jquery and ajax (client side validations), it works fine when run locally.
But when i publish it to the IIS, the client side execution is not taking place.
Do I need to tweak the IIS to make it work.
I am using VS2008 and .net framework 2.0 on a winxp machine.
I am trying to publish to the local IIS (5.0).
<asp:sqldatasource id="DS" runat="server" connectionstring="<%$ ConnectionStrings:MY_CONNECTION %>"
Selectcommand ="Select * from [10.10.10.10].dd.dbo.table">
The connection string is taken from web.config.
I want to take a value from the web.config -> app settings via asp tag.
The reason is that inside the selectcommand inside the sqldatasource I use four-part-name and the IP is hard coded in some aspx files.
I want it to be taken from appsettings property instead.
I have folder in my system.
How to get folder path from my C# console application?
I am using ItextSharp and I am getting a new font for it by doing this
[Code]....
That file is in that directory on both my dev machine and the server. When i run this on my dev machine it works fine, when published to my server I get an error saying FREE3OF9.TTF is not found as a file or a resource. I have double and triple checked that the file is in fact there on my server. My application has full trust on IIS. and IIS user has full access to this folder and this file.And still I get this error. Very frustrating. This code is Not inside the Web Application but inside a DLL class library that the web application is referencing. Do I need to add any more special permissions or something?
I want to create an asp.net application which allow user to specify text file path and create a text file on the specified location by doing some processing from the sql server database.for specifying path of the txt file i am using setting
.xmlsetting.xml
<TextFilePath> "D:Text" <TextFilePath> //as specified by the user.
The code is working fine if it is not published Once the application is uploaded on the server(published) and run under the virtual directory.
how can I change my database connection name in appconfig file....what is the tag name to it?
View 2 RepliesI need to know if .net 4.0 is installed on server or not. How can I do that?
View 6 RepliesI developed an application using VS2010 and now when i try to deploy it on windows XP maching running IIS 5.1 i get the database version error which says:
The database '<database file path>' cannot be opened because it is version 655. This server supports version 612 and earlier. A downgrade path is not supported.
<database file path> . Create is aborted.
An attempt to attach an auto-named database for file <database file path> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I want to make a deployment package for my asp.net 3.5 application. Actually i have to send this to my client who would run this application on his intranet. I tried setup n deployment package type project and it created .msi file.while installing this it create all the files which are lying in the project application. But i want to send all the files in complied format only not directly code files.
How could i convert the aspx.cs files into nonreadable complied files..
I have hosted a website in the iis and when i replace the file it is not updating the file it is showing the old version.
View 1 RepliesI installed Cahrt control of ASP:Net and It works fine on local. I made neccessary changes on web.config but When I deploy it to my site I am getting the error ! It says as below;
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
We have an application that is already deployed in the production environment. And currently it is using Dundas evaluation version. We tried updating it to the licensed version by simply pasting the dll file. but we got the error message as "The file has not been pre-compiled and cannot be requested".
View 1 Replies<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
this error message appeared after i transfered the web application into another server and run it
the error row is as follow:
<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
View 1 RepliesI have the follwoing code that works in a console application but I would like to convert it to a web application. I was thinking of using a dataset. How do I go about doing so?
public static void Main()
var id = AddContact();
}
const string contactCompanyId = "lings";
const string firstName = "Bobby";
const string lastName = "Singh";........
Here's the situation, I've got a console application that needs to run once a day and make a few requests to pages that require authentication to view. The pages are hosted in a really basic ASP.Net Web Application.
So, I know that in order for the requests to go through successfully I have to authenticate with the server. So I've hooked up the console application to the ASP.Net Membership Provider I'm using for the web app and it successfully determines if a set of a credentials are valid. However, after calling Membership.ValidateUser() any requests I make just get the login screen. After doing some reading it seems that this is because I'm missing the important cookie information that persists my login or what-have-you.
I'm using a basic WebClient to make the requests and then reading/discarding the result.
So the meat of the question is this: Is there a simple way to validate the login information and hold on to it so that I can make the requests successfully, or is this the exact same case as the other two questions I found that require the WebClient to make a "manual" login request to the login.aspx page and try to hold on to the cookie from there?
The questions I'm referencing are:
Authenticating ASP.NET MVC user from a WPF application and Login to website and use cookie to get source for another page
I have come across some ASP.NET sites that rather than displaying a page, it launches a console-based application similar to how LiveMeeting kicks-off. I am interested in building an app that uses that feature so that I could take advantage of richer features of a console-based app, but for the life of me, I can't seem to find any info on the internet as to what type of project this would be in VS. I have tried WPF Browse Application, but thats not what I am looking for since the app type I am talking about does not run in the browser at all. The image below shows what happens when reaching the web site, which would therefore then launch the console-application (which is not even installed on the client's machine)
View 1 RepliesThe console application which we are executing on server is not using multi processor. what are the setting i have to do.
View 1 Replies