Configuration :: Create Windows Authentication
Nov 22, 2010
I have created a website which worked fine on my machine. When I try to access it from other machine, I get a message "Page can't be displayed".I have disabled Anonymous access and checked IntegratedWindown Authentication in IIS. I have set Autentication mode as Windows in the web.config file.My requirement is to show the widows id on the asp.net pages. I get the id fromSystem.Web.HttpContext.Current.UserIs there any settings which needs to be set.
View 7 Replies
Similar Messages:
Aug 26, 2010
How to setup Web App on IIS 7.5 using Windows Authentication
View 3 Replies
May 13, 2010
I have a Web App server (WAS) and a database server (DBS). I need to know how to configure both servers, changes to make in the web.config, and any changes to the database needed to allow Windows Authentication from WAS to DBS. I know Kerberos needs to be setup and I know SPNs will need to be created, but I am not sure what all needs to be done.
View 1 Replies
Nov 1, 2010
Recently, I developed an Intranet web app. I implemented windows authentication to capture user details, its working fine when I am browsing on my local machine, But its prompting for usesrID/Pswd for multiple times while browsing on other machines.
configurations (If any) to be done in IIS to implement this even without single login prompt.
Browser: IE6
View 5 Replies
Dec 13, 2010
i am using windows server 2008 and IIS , somebody installed Dynamic Business Portal everytime users trying to use the portal they enter the servername or by ip @ of the windows server /Bp but a login authentication asking them to insert a username and password they can t login the system even they enter their windows authentication
I published another new ASP called Mytest users put name of ther server or ip of the server /Mytest they were able to access the page and no pop up asked them or authentication I added IUser and Everyone and enabled full access.. i check the PB configuration in IIS it was the same Everyone and Iuser are added and full access is enabled how to get rid of the authentication popup
View 4 Replies
Aug 4, 2010
I tried to develop the asp.net 3.5 by using the windows authetication and it seems to work fine. I had tried this code on my machine (local iis6):
Response.Write(User.Identity.Name.toString());
It returned correctly "my windows login usernameDomainname" however, I tried to deploy it on the windows server 2008, it returned "computer name/Administrator" Then, I tried to access this page from my computer which was redirected to 401 error. Moreover, I looked for the system property which showed that this server and my machine are on the same domain group.
View 5 Replies
Nov 2, 2010
I have simple web application called App that is secured with Windows Authentication. I have set identity impersonate to true in web.config. There is only one page (Default.aspx) in App directory. When user enters the site ex.: http://localhost/App the login window pops up. When user clicks Cancel, IIS redirects to page with an error 401.2. I want to redirect to http://localhost/App/app_start/login.aspx. App_start is an aplication that is secured with Forms Authentication. I tried to handle programmatically the redirection by adding Application_EndRequest method in Global.asax file. But when user clicks Cancel the Application_EndRequest is not being fired. When user successfully logs in the method is being fired. Is there any way to handle error 401.2 programmatically or maybe in a different way?
Application_EndRequest code:
if (Response.StatusCode == 401)
{
Response.Clear();
Response.Write("You don't have access to content.");
[Code]....
View 1 Replies
Sep 17, 2010
Just going to start making a web application and was wondering which was better, or at least what are the main differences between them (as it probably matters what I am using them for)?
View 3 Replies
Feb 12, 2010
I am having problems getting the security.aspx to load up on my primary development computer which is using Windows 7 Ultimate and Windows IE 8. Clicking on the ASP.NET Configuration icon from the IDE in the Solution Explorer within Visual Web Developer 2008 Express Edition loads up default.aspx with no problem. But when I click on the "Security" hyperlink to access "security.aspx" I get a message along the lines of "The configured SQL data source provider is not properly configured". It goes on to state a list of potential reasons for this problem. One that includes not having the proper credentials or permissions. Im almost 100% sure it has something to do with permissions because I can't even get to the "security.aspx" page from opening a new empty project. I have recently installed Visual Web Developer 2008 Express Edition on my laptop which is running Vista with all latest updates and this issue does "not" exists. I can click the "ASP.NET" icon, load up "default.aspx" and click "Security" and it loads the page with absolutely no issues.
I have discovered a weird workaround but I don't like having to do this. If I add the following lines to my "web.config" file from any given project I can get to the "security.aspx" page without getting any SQL messages about improper configuration or permissions.
<<remove "LocalSqlServer">
<add
name="LocalSqlServer"
connectionString="data
source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient"/>
Basically, what I have to do to get to the security page to load without error is add a remove statement and then I just cut'n'paste almost the exact same connectionString from machine.config in the Microsoft.netFrameWorkV2.0.5027config directory. This does away with the "Improperly configured SQL datasource message" and gets me a new error message along the lines of "Could not create a SQL instance". My memory is fuzzy on exact error messages since Im not at development computer right now. However, when I change the User Instance attribute from true to false, then I have success at last.
View 2 Replies
Jan 8, 2010
I have just installed SQL Server 2005. I selected windows mode authentication. I am not able to login in management studion. Now, I want to use mixed and server authentication option inplace of windows authentication. so, would that be possible after installation.
View 2 Replies
Jan 4, 2011
What's the difference between Basic Authentication and Integrated Windows Authentication in IIS?
View 3 Replies
Mar 10, 2010
I set authentication mode to Windows in the web.config and I enable Windows Authentication and disable the Anonymous Authentication in IIS 7 on win 7, but HttpContext.Current.User is always null.It works fine when I host the web app in IIS 6.0.
View 1 Replies
Dec 30, 2010
I have been trying to avoid the windows login userid and password window when I use the Windows Authentication mode for a web site. I need to capture the the windows logon user name without prompting for the user id and password and display that on the web site. I had tried almost everything... changed authentication,security setups on IE and IIS etc... still not being able to avoid the window...
View 1 Replies
Mar 24, 2011
I'm trying to enable automatic Window authentication working on our ASP.NET Intranet. I've changed the Authentication on our IIS 7.5 server from Anonymous to Windows Authentication Enabled only, and changed the Web.config file for the website to:
<authentication mode="Windows" />
<authorization>
<deny users="?" />
</authorization>
The Windows login box appears when accessing the website via IE 8, I enter valid credentials, but the login window keeps reappearing as if it does not accept my credentials. By repeatedly cancelling the login box it disappears, and my login name can be viewed on the website. Is there any possible reason for the login box to keep popping up even though valid credentials are being entered? I've restarted the servers / cleared browser cache etc. Also, ideally I would like the user to enter the login details once in the login box and not be required to reenter login details whenever he reopens the browser.
View 3 Replies
Sep 3, 2010
What do I need to do in order to change an application from Forms Authentication to windows authentication?
View 2 Replies
Mar 29, 2011
I have a web application (intranet based) which uses Windows Authentication. Unfortunately there are public computers that have public logins at some company locations. My web app doesn't support these public logins because I need to know the user workingSo, even though these public users are windows authentication users, my app will fail because I have no user account setup for that particular account. I want to then try Active Directory Authentication.In my Default.aspx.cs I'd have something like this
protected void Page_Load(object sender, EventArgs e)
{try
userContext = new UserContext(); // If the authenticated user isn't a user in my system then throw an exception
}
[code]...
View 2 Replies
Sep 8, 2010
We have a working version of application (Intranet) with uses Windows Authentication deployed in Windows 2003. The application uses HttpContext.Current.User.Identity.Name to get the logged-in user. Here impersonate is turned off.Right now, we are move to Windows 2008 RC2 where this Windows Authentication problem arised. I have Digest Authentication and Windows Authentication enabled. And also I have enabled Anonymous Authentication enabled to avoid the Login dialog of IIS in the end-user IE. Now I am getting HttpContext.Current.User.Identity.Name as Empty. When I impersonate using username and password, I am used to login using that user but all the users uses the same user to login.Does any has solution for this?Deployment Server - Windows 2008 RC2 (IIS 7.5)Development - Windows 7 (IIS 7.5)I am new to IIS 7.5. Please give me a solution
View 3 Replies
Nov 2, 2010
My overall goal is just to get the logged on users information for an Intranet site I'm developing without them providing their login (since they are already logged into their computer). So far I just get 401.1 errors and it keeps asking for my login/password. Even though I provide my login/password, it still won't let me in.
I've Enabled Windows Authentication from IIS > Sites > Default Web Site, added this to my web.config:
<authentication mode="Windows" />
<authorization>
<deny users="?"/>
</authorization>
My Application Pool is setup as Integrated / ApplicationPoolIdentity for .NET Framework 2.0.
View 1 Replies
Sep 15, 2010
I've been asked to convert an asp.net application from forms authentication with roles using the aspnetdb database to use windows authentication instead.
what is required to do this? can I still use the roles defined in the app and stored in aspnetdb?
View 1 Replies
Feb 12, 2010
I have an (ASP.NET 3.5) intranet application which has been designed to use forms authentication (along with the default aspnet membership system). I also store additional information about users in another table which shares its primary key with the aspnet_users table.
For users who are part of our domain I store their domain account name in the secondary users table, and I want to automatically log in users whose domain account name matches a name stored in the table.
I have read the guides which are available - they're all from two years ago or more and assume that you are able to activate Windows Authentication on a separate login page that allows you to extract the domain account name. From what I can tell, though, this is not possible in IIS7 (the overall authentication method is applied on all pages and cannot be selectively deactivated, and both authentication methods can't be applied on the same page).
Is there a way of getting IIS to pass through the windows domain account name of the requesting user? I don't need proper AD authentication, just the domain name.
View 6 Replies
Apr 26, 2010
Is it possible to disable windows authentication on one or more subfolders of an ASP.net application using windows authentication?
For example:
A website contains several other folders that contain parts of the overall application: /frontend,/backend, /login
The bin folder is on the same level as these subfolder, i.e. the root of the website.
All of these subfolders contain pages that use binaries that reside in the bin folder of the root of the website.
The user must input windows credentials when visiting a page in the backend folder, but not when visiting a page in the login or frontend folder.
View 2 Replies
Sep 3, 2010
I am developing one intranet website. Being an intranet application, one of the requirement is to have a single sign on feature.
It means that the windows PC username (i.e the "ctrl + alt + delete" username) is going to be the username for the system.
How do i fetch that username?
I tried the following two ways which are working in debug mode but not on live site.
System.Security.Principal.IPrincipal user = System.Web.HttpContext.Current.User;
Response.Write(user.Identity.Name);
&
Response.Write(Request.ServerVariables["AUTH_USER"].ToString());
Both the above method works when i run the page from visual studio.
However when i run the page from IIS or any other server, it gives me a blank value
View 12 Replies
Sep 24, 2010
I have one excel file into my C drive, I wanted to read that excel file and wanted to insert those rows into sql server database.For this I want to create one scheduler.
View 1 Replies
Mar 8, 2010
I've installed IIS for Windows Server 2008 SP2 and Windows 7. In both instances, I can't get even the simplest of ASP.net scripts to work (note: I'm ftping the published files from Visual Web Dev 2008 Express on XP):
------------------------------------LOCAL MESSAGE---------------------------------------------
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error
[Code]....
Line 36: ASP.NET to identify an incoming user.Line 37: -->Line 38:
<authentication mode="Windows"/>Line 39: <!--Line 40: The <customErrors> section enables configuration
Source File: C:inetpubwwwroot estweb.config Line: 38
------------------------------------REMOTE MESSAGE-------------------------------------------
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a
<customErrors> tag within a "web.config" configuration file
located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to
"Off".
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="Off"/> </system.web></configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web></configuration>
Can anyone tell me what I'm doing wrong here in the web.config file? This is killing me.
View 5 Replies
Feb 25, 2010
I'm running windows 7, so I installed on my machine the oracle client version 11.1.0.7.0 (ODP.NET - Oracle.DataAccess version 2.111.7.20) .
I'm trying to deploy an asp.net web application to a server that is running windows 2003, which has the oracle client version 11.1.0.6.0 (ODP.NET - Oracle.DataAccess Version 2.111.6.20)
In my web.config file I have:
<add assembly="Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
(which for my surprise it compiles just fine).
Now when I compile my application and deploy it in a setup project (as pre-compiled). The start page of my web app tires to connect to Oracle and it returns the following error message:
"Could not load file or assembly 'Oracle.DataAccess, Version=2.111.7.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified."
Which is super weird because, cause the web.config file as shown above has Version=2.111.6.20.
Now the strange part is that if I copy the source code from the client to the server, the same code, same config file, it works just fine.
So I'm thinking that the pre-compiled version is telling the server to load Oracle.DataAccess Version=2.111.7.20, maybe in one of the dlls, not in the config file for sure.
Has anyone run into this problem?
what's the best approach to deploy to servers with different oracle client version? (I have a similar problem trying to deploy to a 64 bit machine)
View 2 Replies
