Recently, I developed an Intranet web app. I implemented windows authentication to capture user details, its working fine when I am browsing on my local machine, But its prompting for usesrID/Pswd for multiple times while browsing on other machines.
configurations (If any) to be done in IIS to implement this even without single login prompt.
Browser: IE6
I have created a website which worked fine on my machine. When I try to access it from other machine, I get a message "Page can't be displayed".I have disabled Anonymous access and checked IntegratedWindown Authentication in IIS. I have set Autentication mode as Windows in the web.config file.My requirement is to show the widows id on the asp.net pages. I get the id fromSystem.Web.HttpContext.Current.UserIs there any settings which needs to be set.
View 7 RepliesHow to setup Web App on IIS 7.5 using Windows Authentication
View 3 RepliesI have a Web App server (WAS) and a database server (DBS). I need to know how to configure both servers, changes to make in the web.config, and any changes to the database needed to allow Windows Authentication from WAS to DBS. I know Kerberos needs to be setup and I know SPNs will need to be created, but I am not sure what all needs to be done.
View 1 Repliesi am using windows server 2008 and IIS , somebody installed Dynamic Business Portal everytime users trying to use the portal they enter the servername or by ip @ of the windows server /Bp but a login authentication asking them to insert a username and password they can t login the system even they enter their windows authentication
I published another new ASP called Mytest users put name of ther server or ip of the server /Mytest they were able to access the page and no pop up asked them or authentication I added IUser and Everyone and enabled full access.. i check the PB configuration in IIS it was the same Everyone and Iuser are added and full access is enabled how to get rid of the authentication popup
I tried to develop the asp.net 3.5 by using the windows authetication and it seems to work fine. I had tried this code on my machine (local iis6):
Response.Write(User.Identity.Name.toString());
It returned correctly "my windows login usernameDomainname" however, I tried to deploy it on the windows server 2008, it returned "computer name/Administrator" Then, I tried to access this page from my computer which was redirected to 401 error. Moreover, I looked for the system property which showed that this server and my machine are on the same domain group.
I have simple web application called App that is secured with Windows Authentication. I have set identity impersonate to true in web.config. There is only one page (Default.aspx) in App directory. When user enters the site ex.: http://localhost/App the login window pops up. When user clicks Cancel, IIS redirects to page with an error 401.2. I want to redirect to http://localhost/App/app_start/login.aspx. App_start is an aplication that is secured with Forms Authentication. I tried to handle programmatically the redirection by adding Application_EndRequest method in Global.asax file. But when user clicks Cancel the Application_EndRequest is not being fired. When user successfully logs in the method is being fired. Is there any way to handle error 401.2 programmatically or maybe in a different way?
Application_EndRequest code:
if (Response.StatusCode == 401)
{
Response.Clear();
Response.Write("You don't have access to content.");
[Code]....
I've installed IIS for Windows Server 2008 SP2 and Windows 7. In both instances, I can't get even the simplest of ASP.net scripts to work (note: I'm ftping the published files from Visual Web Dev 2008 Express on XP):
------------------------------------LOCAL MESSAGE---------------------------------------------
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error
[Code]....
Line 36: ASP.NET to identify an incoming user.Line 37: -->Line 38:
<authentication mode="Windows"/>Line 39: <!--Line 40: The <customErrors> section enables configuration
Source File: C:inetpubwwwroot estweb.config Line: 38
------------------------------------REMOTE MESSAGE-------------------------------------------
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a
<customErrors> tag within a "web.config" configuration file
located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to
"Off".
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="Off"/> </system.web></configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web></configuration>
Can anyone tell me what I'm doing wrong here in the web.config file? This is killing me.
I'm running windows 7, so I installed on my machine the oracle client version 11.1.0.7.0 (ODP.NET - Oracle.DataAccess version 2.111.7.20) .
I'm trying to deploy an asp.net web application to a server that is running windows 2003, which has the oracle client version 11.1.0.6.0 (ODP.NET - Oracle.DataAccess Version 2.111.6.20)
In my web.config file I have:
<add assembly="Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
(which for my surprise it compiles just fine).
Now when I compile my application and deploy it in a setup project (as pre-compiled). The start page of my web app tires to connect to Oracle and it returns the following error message:
"Could not load file or assembly 'Oracle.DataAccess, Version=2.111.7.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified."
Which is super weird because, cause the web.config file as shown above has Version=2.111.6.20.
Now the strange part is that if I copy the source code from the client to the server, the same code, same config file, it works just fine.
So I'm thinking that the pre-compiled version is telling the server to load Oracle.DataAccess Version=2.111.7.20, maybe in one of the dlls, not in the config file for sure.
Has anyone run into this problem?
what's the best approach to deploy to servers with different oracle client version? (I have a similar problem trying to deploy to a 64 bit machine)
I am getting this error on a website. does that mean the server is not competible with asp.net 3.5
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Unrecognized configuration section system.serviceModel.
Source Error: [Code]....
Line 236: </assemblyBinding>Line 237: </runtime>Line 238: <system.serviceModel>Line 239: <serviceHostingEnvironment aspNetCompatibilityEnabled="true" />Line 240: </system.serviceModel>
Source File: D:Inetpubvhostsmuratmalli.comhttpdocsweb.config Line:
238
The webapp I am trying to deploy will have the IIS running on the same server as database.I have been assigned a domain account and have been asked to connect to the database using this account.I am not sure how to go about making the connection. I cannot enable impersonation as I need to mention the username and password and it will be security concern, also I need to give write permission onC:WINNTMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files (which is not allowed)The Webserver and SQL server runs with system account.Can you please let me know how to establish connectivity to the server using the domain account without mentioning the password anywhere.
View 1 Repliesi have a machine that i use as a server, the machine is running Windows 7 and IIS 7. I am using Windows Xp and my browswe is IE8.In my application i use Infragistics menu controls. The menu freezes, and they dont respond or calloapse. I have tried the Compatibility mode but it still does that.
View 2 RepliesI have an ASP.NET MVC application running on IIS. In my web.config I defined following section responsible for forms authentication:
<authentication mode="Forms">
<forms
loginUrl="~/Account/LogOn" [code]....
Why do I get a different address from the one defined in web.config?
UPDATE: The "/VNK/site/" prefix is not a problem here. The problem is that LoginUrl property of FormsAuthentication class does not reflect the value from web.config. It means that if I change in web.config loginUrl from "~/Account/LogOn" for example to "~/foobar", FormsAuthentication.LoginUrl still has value of "/VNK/site/Account/Login". Why ?
I'm having two web.config files, one in my root directory(where all web pages of a project are found) and other in admin directory(that is located in root directory). But whenever I try to write [Code].... tag in web.cofig file that is in admin directory, I face the following error on building my project
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I've got Integrated Security up and running.Am I correct that when users initially access the site that they have to enter their user name & password? I was thinking that Integrated Security would allow the user to go directly to the site (it is an on intranet) without having to enter the un/password. My thought was that Integrated Security would eliminate the needs for the user to sign in once they've signed into Windows when they start up their machines.
View 2 RepliesI running MS-Access desktop application, i would like to host it to web through ASP.Net (Only report purpose). regular data we keying in through desktop. is it possible for host through crystal report?
View 1 RepliesI set these setting below at the Web.config of my site And it still return me to the loginpage after about 20 mins I checked the Properties of the site at IIS and the time out is 660 However at the properties of the defaultWeb it's not 660 since it will influence all the sites and that I don't want
<authentication mode="Forms">
<forms loginUrl="Login.aspx"
protection="All"
timeout="660"
name=".ASPXAUTH"
path="/"
requireSSL="false"
slidingExpiration="true"
defaultUrl="default.aspx"
cookieless="UseDeviceProfile"
enableCrossAppRedirects="false"/>
</authentication>
<sessionState mode="InProc" timeout="660"></sessionState>
I am having difficulty getting an asp.net web application to run on a new server. This same app has been deployed to at least a dozen other servers without issue. The x-factor seems to be that Sharepoint Services (WSS 2.0) is present on the new machine.
The app is configured to use Forms Authentication with a redirect to a specified login page, the first symptom is that no attempt is apparently made to redirect new requests, requests proceed directly and then error out when that page attempts to look at the HttpContext.Current.User.Identity.Name.
Second, when navigating directly to the Login.aspx page, the login and authentication check appear to proceed normally, but again HttpContext.Current.User.Identity.Name is blank where is should now have the users login name, and an application error occurs. I have confirmed that the same code on other servers behaves as expected (the Name is set at this point). IIS virtual directory settings are identical as well.
It would seem that something is interfereing with the normal Forms Authentication processes and that something appears to be Sharepoint. We have already listed the web app's path as excluded in the Sharepoint Admin section. Is there something else that needs to be done?
we are developing asp.net web application with form authentication in IIS 6 - Windows server 2003.the application is working fine.but if we call any .html extension we are getting the following errors,
"Internet Explorer cannot display the webpage - Diagnose Connection Problems "
I have a visual studion 2010 solution with two projects
1 . A class libarary
[Code]....
2. A windows service application
[Code]....
The service application is used to convert .dbf files to xml. The convertion is done using the classlibary project wich is called by the windows service application. This class library project has some values hard coded. like the path to look for the .dbf file
const string sourcePath = @"F:forms";
const string pathToDbfStructure = @"F:formsstructure.dbf";
const string pathToBackupFile = @"F:ackup";
I want to make these hard coded values changable. like moving them to an app.config file. To which project I have to add the app.config file (classlibary or windows service)? How can I use the value from configuration file in classlibrary ?
My operating system is Vista SP1 and vs.net 2008, I created windows application project but when I publish it , it display error
Failed to connect to 'http://localhost/project' with the following error: Unable to create the Web site 'http://localhost/project'. The Web server does not appear to have FrontPage Server Extensions installed.
I've been given a virtual dev environment being windows server 2003 and I need to publish a web app to it. I've deployed apps quite easily using the publishing wizard but I'm not sure how to do deploy to a windows server.. can someone please provide a link or a guide on how to do this as I need to set it all up and I really don't know where to start.
View 2 RepliesI set up VS 2008 team suite on windows server 2003 ,and when I begin a new web site and try to run this website I have error saying
Error 61 Unrecognized configuration section system.serviceModel.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config 136
I tried to edit in Machine.config but It did't succeed
My environment is Windows 7 (64bit), with IIS7. I have a web application that I have hosted remotely, as well as running it locally. The problem is that, when running it locally, I would like to go to the app's address at [URL], but when I do this, the page seems to "Half" render, meaning only some images are shown, styles are not being applied, etc. It is very strange.
However, when running the exact same app in debug mode from Visual Studio (which provides a port, like so [URL]), then the App runs fine. I've looked through all IIS settings, and I am not spotting anything obvious that might be causing this. The default port should be 80 for the app. As far as I know I have left all IIS settings default for the most part, and I've installed every single Windows Feature related to IIS, from the control panel.
I am using a third party report component, Xtrareport, which requires full trust in IIS Windows 2003 in order to embedded chinese font to pdf and printing purpose.
How can I set this full trust permission?