Configuration :: Remote Deployment / Giving Error

Oct 20, 2010

i placed ,my asp.net application in FTP server,and database in another remote server using aspnet_reg.sql in command prompt.

here

im getting an error in Roles,i tried executing on the same server with out roles its working properly and retrieving database.

here is my code of web.config file.

<connectionStrings>
<add name="mydata" connectionString="Data Source=192.101.08.2;Initial Catalog=xyz;Persist Security Info=True;User;Password=password1" providerName="System.Data.SqlClient"/>
</connectionStrings>
<system.web>
<roleManager defaultProvider="AspNetSqlRoleProvider1" enabled="true">
<providers>
<add name="AspNetSqlRoleProvider1" connectionStringName="mydata" applicationName="/"/>
<add name="AspNetWindowsTokenRoleProvider1" connectionStringName="mydata" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</providers>
</roleManager>
<membership defaultProvider="AspNetSqlMembershipProvider1">
<providers>
<add name="AspNetSqlMembershipProvider1" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="mydata" enablePasswordRetrieval="true" enablePasswordReset="true"
requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="3" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/>
<add name="MyMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="mydata" enablePasswordRetrieval="true" enablePasswordReset="true"
requiresQuestionAndAnswer="false" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="3" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/>
</providers>
</membership>

-------------------

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

Line 41: <system.web>

Line 42:

Line 43: <roleManager defaultProvider="AspNetSqlRoleProvider1" enabled="true">

Line 44:

Line 45: <providers>

View 1 Replies


Similar Messages:

Configuration :: Deployment Of SQL Sever 2005 Database N Remote Server?

May 11, 2010

i am new to asp.net development and create my website using asp.net 2.0 and sqlserver2005express edition how can i upload the database on remote server i m using plesk acount. and what changes are require in web.config.

View 1 Replies

App Working Fine In Localhost But Giving Runtime Error In Remote Machines

Apr 4, 2012

The title says it all. After a lot of problems with a simple app we use at my workplace, I decided to redo the app again for .NET4 and add some refactoring.

Upon uploading said app, the website runs well on the local host in iis 7.5 Windows server 2008 r2. But when I try to access it on remote machines the server lists a runtime error.

View 6 Replies

Configuration :: .net Search Engine Package / Giving Error?

Feb 17, 2011

I'm trying to install a site search software called FindInSite. After following the instructions, and having a network guy do some of the set up, I get an error in the main config.asp file when trying to load one of four test pages. I can load the one html test page, but all three aspx test pages will generate the same error. The error itself is below:

[Code]....

Since this is an error in loading the roll provider for this particular page, I'm guessing that there is something wrong with the virtual directory or physical directory that was created for this software. None of the other pages on the site generate this error.

View 2 Replies

Configuration :: Error On Deployment In IIS,No Error In Debuger Mode?

Jan 11, 2011

i am getting error when i publish my ASP .NET Application in IIS (using Sql Server 2008 in Window Autentication mode).There is no problem when i execute this ASP .NET Application in Debuger Mode.

View 11 Replies

Configuration :: Giving Error / Upload My File By Uopload Program?

Nov 9, 2010

i upload my file by uopload program ,my site give run time error mt site is :www.cartsabz.ir

View 3 Replies

Configuration :: Deployment Error: Unrecognized Attribute 'type'?

Nov 26, 2010

I am trying to deploy my site from my computer to my server and I am getting the next error.

Server Error in '/Fleet' Application.

Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Unrecognized attribute 'type'.

Source Error:

[Code]....

Source File: C:InetpubwwwrootFleetWebweb.config Line: 12

I am using Framework 3.5

I have tried to change asp.net from 1.1.x to 2.0.x and I am getting other error : The page cannot be found

View 2 Replies

Configuration :: Can Create An Incremental Deployment Package Using Either Visual Studio 2010 Web Deployment Projects

Mar 27, 2011

Can I create an incremental deployment package using either Visual Studio 2010 Web Deployment Projects or Web Deploy (Web Deployment Tool) .

I need to automatically select changed files from a source and destination or a change set on TFS and build a deployment package only with the changed files.

View 9 Replies

Configuration :: Xml Parsing Error - Configure For Remote Server?

Jan 4, 2011

I have hosted a asp.net project working in asp.net 3.5. All it is working fine, but some time i got error message XML parsing error;Not wel formed. Location: http://www.(my domain name); Line number 1, column 14.

[URL]shockwave/download/index.cgi?P1_prod_version=shochwaveflash" align=left>

I got some about IIS configuration in local system by using this command

%Windir%Microsoft.NETFrameworkv1.1.4322aspnet_regiis.exe -i

But how to configure for remote server?

View 1 Replies

Configuration :: Deployment Error -Failed To Generate A User Instance Of SQL Server Due To A Failure In Copying Database Files

Jul 28, 2010

I have created roles and users using ASP.NET configurations for login validations, it works fine if I run my application within project but when I publish my site and try to run from my Inetpub it giving this error. I tried all shorts of solutions posted in website but nothing worked for me.

"Failed to generate a user instance of SQL Server due to a failure in copying database files. The connection will be closed"

View 5 Replies

Configuration :: Database Publishing Wizard / Giving "Invalid URI" Error?

Mar 18, 2010

I can't figure out why it won't publish the database to my hosting account. I have an SQL server set up with a username and password, etc. but I don't understand why it won't connect.

It keeps giving me an "Invalid URI" error. I don't know what to do or what to look for.

I'm just learning ASP.NET and I don't understand what it wants besides what I've given it already.

View 2 Replies

Configuration :: The Remote Server Returned An Error: (404) Not Found - How To Rectify It

Nov 9, 2010

I have written the following code in Global.asax but I'm getting error The remote server returned an error: (404) Not Found in the

[Code]....

View 2 Replies

Configuration :: The Remote Server Returned An Error: (408) Request Timeout?

Aug 9, 2010

I move a file from server to another server .in local it is woking fine .but in production it is getting error

The remote server returned an error: (408) Request Timeout.

i used like this ..

objWebClient.UploadFile(ClientLocation,
"POST", fileName.ToString());

View 3 Replies

Configuration :: Validation / Giving Error For <httpRuntime RequestValidationMode="2.0"/>?

Nov 12, 2010

i have a proplem in asp 3.5 with an error of potintol dangoures elments so i added two lines in web.config file under

<system.web>
<pages validateRequest="false" />
<httpRuntime requestValidationMode="2.0"/>
</system.web>

but gave me an error for <httpRuntime requestValidationMode="2.0"/> . it worked in asp 4.0 . so my question is there an equlivant of that line for asp 3.5

View 1 Replies

C# - IIS Server / Webpage Giving Error Some XML ERROR?

May 25, 2010

whenever i needed to test my web site, i used to press ctrl and f5. i recently installed installed iis service. kept an html page accessed it from host kept an fully developed default.aspx page in the www directory tried to access gave error of XML something....that means i can only use HTML pages, ? so what to do if i am using c# asp.net? current i do not have the computer with iis installed so i cannot post the exact error message it was something like can not render XML (then it said something like unknown line)

"<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs"
Inherits="_Default" %>"

View 2 Replies

Configuration :: WIX For Web Site Deployment?

Jan 7, 2011

I am using WIX 3.6 for VS2010 to create our MSI's for our web application setups. This is all working fine and all in terms of deployment and uninstall.

I recently allowed the user to specify the virtual directory and application pool names to support side by side installs. This is all fine as I have created my own setup bootstrapper.

The issue is with uninstallation.

If the user does not specify the names and leaves the default values, it will install successfully.

The minute the user updates the names from the defaults, the install process will not remove the app-pool and virtual directory. This is what I have found consistently with my testing.

View 2 Replies

Configuration :: Best Deployment Method?

Jun 4, 2010

We are working on an asp.net project. There are 5 developers in the team. The team size might increase in future. Deployment of the project, often creates some problems for us. We are using svn (very much like vss) to update and commit our codes to a common location.Apart from all these, the changes made by one developer sometimes affects the changes made by another. We usually move only the aspx files and dlls to the server. This causes lots of issues to the testing team as the testers need to check the entire application whenever a dll is updated on the server. We are now looking for a deployment method, that includes both pre-compilation as well a means that enables us to do patch releases (like making a change to the aspx.cs alone without having to update the entire dll) If it is not possible, what is the best deployment method that would suit our requirements?

View 2 Replies

Configuration :: Web App Deployment Options

Jan 14, 2011

While developing my web application I was testing using the cassini web server and everything works great! So my program is complete and I am trying to publish it out to a client IIS server on a Windows 2008 R2 server. I have created an app.pool for this application and set it to run with a domain admin users (I am not using the "Administrator" account) since the file processing will be writing the file to a NAS device via a UNC path. When I start the debugging on the server and look at task manager it shows that the "w3wp.exe" is running using the domain admin account, but when I run my code it does not give me a run time error I just get the following warning in the event log.

View 11 Replies

Configuration :: Deployment In Webfarm?

Mar 25, 2010

multiple websites in a webfarm. I need to deploy multi lingual sites under iis likewww.xxx.com will point to a folder where I want to keep all the files and bin folder but the folders below like /en, /fr, /es etc will be having the web.config inherited from the root folder. My problem is1. How to share the bin in the root folder with other websites beneath it. like I havewww.xxx.com pointing to xxx directory and I have /en pointing to xxx/en. Rather than me copying the bin folder to every website? I cannot place in gac as this is multi server env. is there a way i can set all the servers gac to get dlls from one directory?

View 1 Replies

Configuration :: MVC & Webforms Mix-up Deployment?

Aug 26, 2010

I have an application that is developed with Web forms. I added some new functionlities using MVC by folloiwng the post ttp://www.hanselman.com/blog/PlugInHybridsASPNETWebFormsAndASPMVCAndASPNETDynamicDataSideBySide.aspx . The application works fine in Visual Studio 2008 builtin server but after deployment on IIS 7 with integrated mode, i am facing issues with MVC part of the application. Webform part works fine. Like www.example.com/content/default.aspx (webform) works fine but www.example.com/Home/Index (MVC) doesnt work and saysHTTP Error 404.0 - Not FoundThe resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

View 2 Replies

Configuration :: Deployment With SQL Back End?

Aug 26, 2010

I think I am finally ready to publish my website but I have a issue that is causing me some confusion.The website has been built on my desktop so it's location is something likeC:Documents and SettingsMeDesktopIn the project, under a folder called "App Data" i have my database and all the connection strings in my website point to this folder.However when I use VS to publish the website if for example I were to publish it tooC:CopySiteobviously even though there is a copy of the database in the "App Data" folder in this location all the connection strings point to the Database location on my desktop. How can I get it so the CopySite "App Data" folder is the one used to store all my data?

View 9 Replies

Configuration :: How To Do Parital Deployment

Jan 12, 2011

I have a web site which has been deployed to my client server. after the deployment I found some changes required in code/source file and that needs to be fixed right away. Since my project is so huge I dont want to deploy the entire web site once again to my client server. I want to deploy the updated souce file or updated source file dll.

View 1 Replies

Configuration :: Web Application Deployment?

Feb 23, 2011

Can any one explain what is web application deployment.and how it is useful.in the sense of advantages.also steps for web deployment.

View 5 Replies

Configuration :: Deployment Asp Application?

Mar 16, 2010

How to deploy the asp application.Please explain in simple term.

View 2 Replies

Configuration :: Changes Not Reflecting The Deployment?

Jul 16, 2010

I have a webaplication which is converted into a setup for installation.

Now i have made change to the webapplication and have build the new version of the setup,But this version of the setup doesn't have the changes that i see in the debug mode.

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved