Crystal Reports :: Show Master Detail Relationship
May 7, 2015
I am new in crystal reports. I want to show main detail relationship in crystal reports like this
Main Records
CustomerID CustomerName ContactNo City
1 Shaiwal 7388898### Varanasi
Detail Records
CustomerID OrderID Quantity UnitPrice
1 1 50 500
1 2 30 1000
1 3 60 700
1 4 80 5000
View 1 Replies
Similar Messages:
Mar 16, 2010
I have a current scenario where I have a master detail report for a single certain record in table in format
Record 1
detail 1
detail 2
detail n
Currently I have 2 details section with Record data in 1 section and a subreport in other section (details)
Now I want to have report for all records in table like
Record 1
detail 1
detail 2
detail n
Record 2
detail 1
detail 2
detail n
and so on.
How do I structure my report to have master details for all the records in the table ?
View 10 Replies
Jul 2, 2010
I am using a Datalist and a Listview in a Master/Detail relationship. Each time a DataList item is bound, a Listview is loaded dynamically. I have provided the relevant Layout and Item templates. It is worked fine for one item. But for more than one item, it will raise the following error: "An item placeholder must be specified on ListView 'ItemListView'. Specify an item placeholder by setting a control's ID property to "MyLayout$itemPlaceholder". The item placeholder control must also specify runat="server".
Despite having set up the item placeholder.
Here is the code-behind:
protected void NodeDataList_ItemDataBound(object sender, DataListItemEventArgs e)
{
if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem)[code].....
The Layout template:<asp:PlaceHolder ID="itemPlaceholder" runat="server"></asp:PlaceHolder>
View 3 Replies
Apr 3, 2010
Actually i am creating 1 sofware in which i need to print bill. On that bill my page header (company's name) is constant & on Report footer (companys rule & some more data) is also constant. & my Detail section is varying. On bill if data is short, my footer goes upside.
I need to fixed my detail section so that position of detail section will be maintained.
or
I need to fixed my footer section so that position of footer section will be maintained.
now which is the solution form above 2? . and how to implement?
View 1 Replies
Mar 17, 2011
This is my image: - Plz checkout http://tinypic.com/r/dzxpa0/7
From the above image, i have one group header, Detail A and Detail B in my report.The detail Item and Header is merged and showing one detail A and Detail B item.But, I need the report to look like this ....
Detail A i have placed
S R
Pieces --- Header
I-VI 3/5
5 --- Details Items
VII-VIII 5 6
--- Details Items
VII-VIII 1/4 0.6-0.8
--- Details Items
Detail B i have placed
CustomerName DateOfIssue Article
John 3/7/2011
Nero
John 3/7/2011
Ne
John 3/7/2011
Co
View 4 Replies
May 7, 2015
"HTTP data inspector Fiddler." what is the use of this and give me any article for how to use fiddler to monitor wcf service in detail
View 1 Replies
Mar 18, 2010
I have a table with product codes and items related to the codes.
TABLE 1
Product Codes | Item Number
RP WOEWPOI
Y OWRT0W
ZZ LDSFLSGKK
I have created a second table which contains a product group. This table holds information on where the Product Codes belong. I'm not sure if I have designed this table correctly.
TABLE 2
Product Group | Product Codes | Product Codes1 | Product Codes2 |Product Codes3 .........etc etc
Tin RP TL ER AS
Metal Y ZZ
Water EF TY AS
Coffee OP RC
My aim is to create a report in where I know a particular item is related to a certain Product Group. I'm not sure if I'm going about it the right way though. I need to know how to link it if it's one to many or many to many or...I really don't know.
View 5 Replies
Jun 15, 2010
I need to produce a report that will calculate values based on previous record field value and current record field value Can I store a field value say in a variable and then on the next detail line record have it accessed so I can say subtract current field value - previous field value from previous detail line? Where can I define this globial variable ?
View 5 Replies
Feb 1, 2010
I just started playing around with crystal reports. I created a report crystareport1.rpt and from the data base fields section I dragged and dropped empid, empname into details section. I want the report to show
empid empname
1 a
2 b
3 c
Like this . But now it is displaying
empid empname
1 a
empid empname
2 b
empid empname
3 c
Like this how can i get the desired out? One more thing on the button click I wrote
Response.Redirect("~/CrystalReport1.rpt");
But I am unable to open the report what should I do to see the report?
View 4 Replies
Oct 29, 2010
Order Table
Order No Date Product Qty Customer
A101 10-Oct-2010 Mac Book 10 John
A102 10-Oct-2010 I-Phone 25 Smith
A103 10-Oct-2010 I-Pad 40 Kallis
Here Order No is primary key
Order Detail Table
Order No Date Product Qty Customer Batch No
A101 10-Oct-2010 Mac Book 03 John B01
A102 10-Oct-2010 I-Phone 05 Smith B02
A103 10-Oct-2010 I-Pad 10 Kallis B03
A101 10-Oct-2010 Mac Book 02 John B04
A102 10-Oct-2010 I-Phone 07 Smith B05
A103 10-Oct-2010 I-Pad 15 Kallis B06
Here Batch No is primary key
The above table is just a sample table.
I have more than 1000 Order in my table. And for each Order there are at least 12 Order Detail is available in my Order Detail Table. It uses to take long time on loading the report for the first time. So, I thought to select Top 20 records from Order table. I have used the below query in crystal report command
Select Top 20 O.OrderNo, O.Product, O.Date, O.Qty,OD.Unit,OD.Rate from Order O
inner join Order Detail OD on O.OrderNo = OD.OrderNo
1. After execution of above query, I would like to know whether all the records from Order Detail Table will be checked during execution (OR) only matching Top 20 records of Order Table will be checked in Order Detail Table and executed?
2. How to use stored procedure in Crystal Report command?
3. What are the steps I need to take, to load Crystal report fast during first time page load?
View 1 Replies
Jul 30, 2010
I have an "Edit" page that uses a FormView bound to an EntityDataSource. The page is called with the ID field of the record to edit in the query string: "EditEmployee.aspx?ID=10". The EDS the FormView is bound to is using: AutoGenerateWhereClause=true and a QueryStringParameter. Below the FormView I have a ListView that contains some child records of the FormView. The ListView is bound to a seperate EDS and also uses the (same) QueryStringParameter.
The problem I am having is when this ListView attempts to Insert or Edt a column I receive an error because I don't have the ID field (EmployeeID) of the parent bound anywhere in the ListView (and obviously, it is setup as a ForeignKey so it fails, like it should). Any advice on the best way to get this ID (EmployeeID) column bound in the ListView? There are many things I can do in code behind, but I would like to solve this in the markup if possible. I can move the ListView so that it is inside of the FormView if necessary.
View 1 Replies
Mar 17, 2011
I have requirement that have to add header and footer into 50 over reports. So I dont want to change one by one.
Is there a way to create master page header and footer and used it in multiple reports?
View 1 Replies
Jun 22, 2010
I installed Visual Web develperTrying to get a crystal report to show in the form but therte are no Crystal obhject to select Installed Visual Studio 2008 I can add an Item for Crystal now in form show the form and I see it has menu bar for crystal viewer and I see the report Now if I move the webpage to our server which has IIS 7.0, ASP.net 3.5 what else do I need to install on the server so it wil show the crystal report in the form?
View 5 Replies
Sep 13, 2010
I'm using crystal report 9 in asp.net 2.0 web site. i couldn't display the image in report. Is anyone having idea about this? i put the image using Insert Picture. in my web config , i put following codes,
[Code]....
View 1 Replies
Aug 5, 2010
When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
View 2 Replies
Feb 18, 2011
Here's my GridView control:
[Code]....
And here's my FormView control:
[Code]....
The problem is, when I click on the GridView item, the formView control does not show the detail.
View 1 Replies
Aug 6, 2010
I'm trying to setup is a News module with article listing paging and article detail paging. I have a GridView with paging that lists my articles just fine. In that list, some article titles have links that direct to an article detail page by passing in the articleID to the details page. I was able to setup my details page, which uses a DetailsView control, to use paging by using an ObjectDataSource with pageIndex and pageSize parameters from the querystring. Once on my detail page, I can use my navigation arrows to move through Next and Previous articles just fine.
No matter which article I click in my article list, my detail page always starts with pageIndex 0 and thus not the article I clicked on. I understand why that is because it's going by pageIndex value instead of articleID. What I need it to do is, set the detail to whatever articleID i pass in, then allow me to navigate Next and Previous to THAT particular article instead of starting me off from pageIndex 0.
[Code]....
View 2 Replies
Feb 6, 2011
article on binding to a list and I've got that working fine on one view. But what I'm stuck when doing it off a master record. Everything seems to work except that when I look in the database the detail records previous associated with the current master have their Foriegn key to master set to Null and a new set of detail records have been inserted. I've got a really simple form for this object
[Code]....
The form collection comes back with the expected prefixes:
[Code]....
And the Controller.UpdateModel(master) binds all the properties correctly. But when I call dbContext.SaveChanges it issues the follow sql from sql profiler (psuedo code)
[Code]....
I've got a work around that works but it's pretty hackish and I'm currently not matching up the keys so it's dependent on everything coming back in the right order. Plus I've got to include all the fields that I want updated.
[Code]....
I thought that entity framework's code first was the culprite but I've unit test that and it works fine. I've got a feeling that UpdateModel is somehow removing and re-adding the children. Has anyone else got this to work? Of course, I could throw in the towel and parse the indexed field names myself, but I'm so close!
View 2 Replies
Jan 26, 2010
I've been experimenting with using EF (asp.net 3.5 sp1) with a master detail page. Using northwind as the database, I'm simply trying to have categories as master and products as detail. I have read everything I could find on the net about the where condition and it still fails with this error as soon as I click the select link in the master grid:
Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: A property with name 'CategoryID' does not exist in metadata for entity type 'WebAppEF01.Products'.
What strikes me is that the CategoryID column is not exposed by the EF model. That's been rolled up into the navigation element 'Categories' I suppose...but on the surface this seems to create the problem I've running in to. I've tried turning off the autogeneratewhere clause but didn't have success. The code for this page follows below.
[Code]....
View 2 Replies
Mar 10, 2010
I would like to ask is it possible to show crystal report in pdf format in web? I know how to export crystal report in pdf format, however, it is exported to client's computer.
View 1 Replies
Sep 20, 2010
I have a crystal report designed in cystal report 9. The report also has a sub report. Now what I want is to show dynamic image in the sub report. My images are saved in sql server 2005 as image. Anyone has any idea how to show the images from sql server 2005 to crysatal report.
View 1 Replies
May 11, 2010
i am using asp.net 2008, freamwork 2.0, crystal report 10.2 i have a problem to get images on report from servers physical location. i have a barcode path store in BarMSt_M table as /images/barcode/bar.jpeg, now i need to show barcode in crystal report 10.2, what should i do,what can be extra setting or to install.
View 1 Replies
Dec 1, 2010
I have 20 Charts in 20 Crystal Reports and I want to show them all in a web page in ASP.net 2.0. If I take a crystal report viewer ,it shows only 1 chart in that viewer. I want to show them all .Is it possible.
View 1 Replies
Nov 24, 2010
I want to show the photo in the Crystal report from the particular folder. How can i do this.
View 3 Replies
Feb 2, 2011
I am project where I am having 2 tables namely sales_master & sales_transaction.
how to populate data in crystal report so that master records are not duplicated.
For ex. Date , Customer name & etc. should not be repeated again..
View 1 Replies