Crystal Reports :: Order Detail Table General Query Doubts?

Oct 29, 2010

Order Table

Order No Date Product Qty Customer
A101 10-Oct-2010 Mac Book 10 John
A102 10-Oct-2010 I-Phone 25 Smith
A103 10-Oct-2010 I-Pad 40 Kallis

Here Order No is primary key

Order Detail Table

Order No Date Product Qty Customer Batch No
A101 10-Oct-2010 Mac Book 03 John B01
A102 10-Oct-2010 I-Phone 05 Smith B02
A103 10-Oct-2010 I-Pad 10 Kallis B03
A101 10-Oct-2010 Mac Book 02 John B04
A102 10-Oct-2010 I-Phone 07 Smith B05
A103 10-Oct-2010 I-Pad 15 Kallis B06

Here Batch No is primary key

The above table is just a sample table.

I have more than 1000 Order in my table. And for each Order there are at least 12 Order Detail is available in my Order Detail Table. It uses to take long time on loading the report for the first time. So, I thought to select Top 20 records from Order table. I have used the below query in crystal report command

Select Top 20 O.OrderNo, O.Product, O.Date, O.Qty,OD.Unit,OD.Rate from Order O
inner join Order Detail OD on O.OrderNo = OD.OrderNo

1. After execution of above query, I would like to know whether all the records from Order Detail Table will be checked during execution (OR) only matching Top 20 records of Order Table will be checked in Order Detail Table and executed?

2. How to use stored procedure in Crystal Report command?

3. What are the steps I need to take, to load Crystal report fast during first time page load?

View 1 Replies


Similar Messages:

Crystal Reports :: How To Set Fixed Length Of Detail Section

Apr 3, 2010

Actually i am creating 1 sofware in which i need to print bill. On that bill my page header (company's name) is constant & on Report footer (companys rule & some more data) is also constant. & my Detail section is varying. On bill if data is short, my footer goes upside.

I need to fixed my detail section so that position of detail section will be maintained.

or

I need to fixed my footer section so that position of footer section will be maintained.

now which is the solution form above 2? . and how to implement?

View 1 Replies

Crystal Reports :: Master Detail Of All Data In Tables?

Mar 16, 2010

I have a current scenario where I have a master detail report for a single certain record in table in format

Record 1
detail 1
detail 2
detail n

Currently I have 2 details section with Record data in 1 section and a subreport in other section (details)

Now I want to have report for all records in table like

Record 1
detail 1
detail 2
detail n
Record 2
detail 1
detail 2
detail n
and so on.

How do I structure my report to have master details for all the records in the table ?

View 10 Replies

Crystal Reports :: The Detail Item And Header Is Merged ?

Mar 17, 2011

This is my image: - Plz checkout http://tinypic.com/r/dzxpa0/7

From the above image, i have one group header, Detail A and Detail B in my report.The detail Item and Header is merged and showing one detail A and Detail B item.But, I need the report to look like this ....

Detail A i have placed

S R
Pieces --- Header

I-VI 3/5
5 --- Details Items

VII-VIII 5 6
--- Details Items

VII-VIII 1/4 0.6-0.8
--- Details Items

Detail B i have placed

CustomerName DateOfIssue Article

John 3/7/2011
Nero

John 3/7/2011
Ne

John 3/7/2011
Co

View 4 Replies

Crystal Reports :: How To Use Fiddler To Monitor WCF Service In Detail

May 7, 2015

"HTTP data inspector Fiddler." what is the use of this and give me any article  for how to use fiddler to monitor wcf service in detail

View 1 Replies

Crystal Reports :: Show Master Detail Relationship

May 7, 2015

I am new in crystal reports. I want to show main detail relationship in crystal reports like this

Main Records

CustomerID         CustomerName             ContactNo           City
1                           Shaiwal                          7388898###      Varanasi

Detail Records

CustomerID         OrderID                        Quantity              UnitPrice

1                           1                                    50                         500
1                           2                                    30                         1000
1                           3                                    60                         700
1                           4                                    80                         5000

View 1 Replies

Crystal Reports :: Generate Crystal Reports Through Query String?

Jun 15, 2010

I want report generted based on value from querystring.

View 3 Replies

Crystal Reports :: Accessing Previous Field In Detail Line?

Jun 15, 2010

I need to produce a report that will calculate values based on previous record field value and current record field value Can I store a field value say in a variable and then on the next detail line record have it accessed so I can say subtract current field value - previous field value from previous detail line? Where can I define this globial variable ?

View 5 Replies

Crystal Reports :: Detail Section Coming With Multiple Headings

Feb 1, 2010

I just started playing around with crystal reports. I created a report crystareport1.rpt and from the data base fields section I dragged and dropped empid, empname into details section. I want the report to show

empid empname
1 a
2 b
3 c

Like this . But now it is displaying

empid empname
1 a
empid empname
2 b
empid empname
3 c

Like this how can i get the desired out? One more thing on the button click I wrote

Response.Redirect("~/CrystalReport1.rpt");

But I am unable to open the report what should I do to see the report?

View 4 Replies

Fill Crystal Report Data Through Custom Query & Not Crystal Reports Wizard?

Mar 17, 2010

a myth has been passed to me by a senior who told me to 'always' design a crystal report using Add command and not through the table view (like selecting tables and linking them manually).I have been having a hard time writing the queries for master detail reports and making sub report links manually. It gets pretty confusing sometimes.I find it easy to design reports by just selecting two tables and dragging and dropping the link in crystal report designer.

View 1 Replies

Forms Data Controls :: Datacontrol For Order And Order Detail - How To Fetch Record Based On Paging

Oct 22, 2010

I have two table Order and Order Detail.

What i need is i need to bind last 10 Order in Gridview/details view with paging, and the same order detail also fetch from database and shown in another gridview.. if user click any oderNo in first Gridview/DetailView then i need to show Respective order detail in anther gridview..

without postback coz we already fetch 10 order with orderdetails from the database..and if user click next 10 orderNo using paging then again we need to load 10 orderNo with respective orderdeatils from database like this going on....as well as let me know how to take print of particular oder and order detail....?

View 7 Replies

Crystal Reports :: Either The Crystal Reports Registry Key Permissions Are Insufficient Or The Crystal Reports Runti?

Aug 5, 2010

When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.

View 2 Replies

Crystal Reports :: How To Dynamically Pass SQL Query

Jun 16, 2015

How to pass sql query to crystal report programmatically using c#

View 1 Replies

Crystal Reports :: Concatenate In Formula Field Or SQl Query?

Sep 28, 2010

I need to concatenate address string. Is it better to concatenate using the formula field or concatenate in the Sql query itself? which one would be faster?

View 1 Replies

Forms Data Controls :: Date In Gridview - Use The ORDER BY Statement In General?

Feb 19, 2011

One of my table columns is for date and I understand how to use the ORDER BY statement in general. But how would I have the gridview sort with only the future items (relative to the current date) apear and leave out the past entries?

View 10 Replies

Crystal Reports :: Integrating Crystal Reports XI(stand Alone Reports) With Web Application?

Jun 13, 2010

I'm new to Visual Studio.NET . I need to integrate the crystal reports into an ASP.NET application. I generated Crystal report with the help of crystal report XI developer edition(Stand alone version and NOT from the one which comes from visual studio).

How to integrate this report with the web application.

View 1 Replies

Crystal Reports :: Calling Reports Developed In Crystal Reports 8.5 In VS2008?

Jul 16, 2010

We have quite a few reports which were developed earlier in Crystal Reports 8.5. We are now planning to use these reports in our web application developed in VS 2008 (C#).

What dlls are needed for calling 8.5 in the application and how should they be added to the application while shipping it to the client?

They are also struggling to get the code running. Would also need the code to call the report with parameters.

View 9 Replies

Crystal Reports :: Unknown Query Engine Error Checked The Stored Procedure With The SP?

Mar 24, 2011

I'm working on a vb.net windows project using crystal reports for report generating.I'm using stored procedures as well.Stored procedures are used by crystal reports.When I run report with some parameters it gives error,like this " Unknown Query Engine Error ".I have checked the Stored Procedure and there is no problem with the SP, no extra parameters.

View 1 Replies

SQL Reporting ::to Create Reports Including Pre-formatted ,summary And Detail Reports?

Mar 10, 2011

Iam working on a banking web application developed in asp.net 3.5 and MS SQL Server 2008.My problem is to create reports including some pre-formatted reports,summary reports and some detail reports.I want to know what is the best technique to create these reports.I don't want to use third party reporting tools as they have to be configured on the web server and some times they takes lot of time in generating reports due to their complex structure.Since its a web application having large recordsets so i need a consistent solution keeping in mind the performance and complex nature of the reports which might be demanded by the banks.Can anyone help me please in this regard?

View 2 Replies

Crystal Reports :: Display Fields From Table

Nov 19, 2010

using vb.net 2005 and crystal reports I added a server and db to my crystal report and I can see the table and fields in the server explorer. Also in "database expert" I added the table that I want to display data from. The question I have now is how to I display fields from this table on my report? I thought I remembered simply dragging and dropping a field onto the report from the table but not able to do that now

View 1 Replies

Crystal Reports :: How To Display Informations In A Table

Jan 3, 2011

I have some informations to put in my report and i want to display them in a table format

for example:

Number
[Number Information extracted from the database]
Description
[Description Information extracted from the database]

View 2 Replies

Crystal Reports :: Passing Parameters In Crystal Reports Dynamically Selected By Users

Apr 6, 2010

I have already generated crystal reports but i've made them static. but now i want to make the user to select the criteria for generating the reports. for eg., in one of them i want to show monthwise data so user should be able to select the month and year and that would be passed as parameter and compared to the existing data. provide me with proper exact code that can be used for giving parameters in such a report using C#.

View 3 Replies

Crystal Reports :: Change Table Connection String

Feb 12, 2011

I have serveral databases with same tables. I created a crystal report to show the report for respective logins from the database. I have a problem in it. In crystal report when i changing the database it should not change the respective table. It loads only the table what we give in the connection string first time.

View 1 Replies

Crystal Reports :: Can Bind DataSet With Two Table Adapters

Sep 30, 2010

I have designed a DataSet which contains two TableAdapters. I want to Bind That dataSet with two table adapters how to do this?

Code:

[Code]....

My Code runs without error but it shows a blank report.

View 1 Replies

Crystal Reports :: While Adding Add Reference It Showing Crystal Reports Version 10 Instead Of 11

Jan 4, 2011

In my system Visual studio 2008 with sp1 and Crystal Reports XI Release 2.In Visaul studio 2008 ,while adding add reference it showing crystal reports version 10 instead of 11.How to solve the version problem.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved