I am developing a CompositeDataBoundControl that is basically a 'table' inside a 'div', in order to limit the size of the Control and use the scrolling capabilities of the 'div' tag ('RenderBeginTag("div").
So essentially the control is;
<div style="overflow:auto;width:400px;height:300px;">
<table style="table-layout:fixed;">
[code]...
I have a User Control (ascx) and a property which a want to display in my categories tab in Visual Studio in the category named "Styles".
[Code]....
And here is the problem: Actually I do not need a get, because I only have to set the property (write only property). But when I omit the get, the property is displayed in the "Misc" category in the categories tab in Visual Studio. Only when I code the get as well, then the property is displayed correctly in the "Styles" category in the categories tab in Visual Studio.
Does anybody know why? How can I display the category correctly only with set?
How do I do something like the following:
[Code]....
If certain attributes on built-in ASP.NET controls aren't specified, then an exception will be thrown.
How do I do this on my custom user/server control?
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
That can be setup to display certain number of records per page and allow paging.
I have tried the repeater, but having issues with paging since its linked to a SQLDatasource.
I have done a search on "Paging Repeater" and all examples are setup with XML and other datasources and im not able to figure out how to modify that to work with my SQLDatasource.
You'll have to excuse my ignorance, I'm coming at this from a front-end perspective, and don't really know how to deal with data views in ASP.NET.
Basically, I'm trying to change the layout of some repeated data from a straight table, to something more design-heavy. It's the same data, just re-organised slightly. The current ASP.NET code looks like this:
[Code]....
However, I want to replace all of this, such that each 'row' of data renders like this:
[Code]....
How is this done? Can I just edit the code above, or would I need to do something more advanced in terms of not using a data grid and using some other control instead? Is it something that can be done in just a .aspx file or would it need to be done in C# and compiled?
How can I access the datalist at run time to create, a table layout but with the first cell having a rowspan of 2? Below is the HTML source code to demonstrate.
<table border="1">
<tr>
<td rowspan="2">1</td>
<td>2</td>
<td>3</td>
</tr>
<tr>
<td>5</td>
<td>6</td>
</tr>
</tr>
</table>
[Code]....
I am having a problem setting the SystemObjectRecordID attribute of my custom control inside a repeater. Currently, the value winds up as zero in the database. Things I have checked:
1) The datatype of the DB column (bigint) and the datatype of AlertId (long) and the datatype of the getter/setter SystemObjectRecordID variable (long) match.
2) If I set '<%# ((Alert)Container.DataItem).AlertId %>' to the Text attribute of a label I get the expected results. So, it has something to do with my custom control and specifically how data isbound to the SystemObjectRecordID attribute.
Now, going to the server, below is what I have for databinding (The page is Default.aspx.cs and the namespace is Company.ProjectWeb.Profiles):
[Code]....
Currently I am trying to pass the value received from a literal (because I know that the values are received as expected here) to the SystemObjectRecordId object. Still isn't working. I am still getting a value of zero when I set a breakpoint and look at the value of SystemObjectRecordId in the codebehind of my control:
[Code]....
I was wondering, how about can i databind some custom attributes to my Radiobuttonlist / Dropdownlist / Checkboxlist? My existing code as follows:
With Me.ddlOtherApplications
.DataTextField = "ApplicationName" + Me.iSolutions_SysVariables.sys_iLanguage.Replace("-", "")
.DataValueField = "ApplicationID"
.DataSource = dtOtherApplications
.DataBind()
End With
However, I have 2 more additional custom attributes: ApplicationID and ApplicationImgUrl..... how abt do i databind these 2?
attribute to be the foriegn key which is not a primary key in the original table?
View 1 Repliesi have a database with several paths looking like the one below
C:S&M Site ProjectNEWSMAASitePhotos2GUY093GUY093-Tulips.jpg..
What i aim to do is load the images into a gallery control (if one exist)the users viewing the images should be able to do either of the following:
-Double click on an image to see it bigger or some large predefined size.(thats the viewing part of it)
-Select those images the want and then extract it as a single PDF file to any location on the user machine.
-print all selected images.
-Remove all selected images from the gallery as well as the image path from the database.
I have a custom server control inheriting from CompositeControl. It consists of two RadioButtonlist controls that are rendered side by side in an html table. The number of ListItems in each RadioButtonList is not known until runtime. Depending on how many items each list contains, the RepeatColumns property of each list is set differently. To do this in the handler for the ItemDataBound event I need to get the count of ListItems in each RadioButtonList. How do I expose the Items.Count property of each internal RadioButtonList as a top-level property? I tried using a getter to return the count but this generates a compile-time error to the effect that the count cannot be assigned to--even though I have not created a setter.
Similarly, in the handler for the Submit event, I need to get the ClientID of each internal RadioButtonList to pass to a method that checks for data changes. How do I expose the ClientID of each component RadioButtonList as a top-level property?
I can of course index the Controls collection of the composite control to access the child control and read its properties--but that defeats the whole point of making a complex, independent custom server control.
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 RepliesWhy not use tables for layout in HTML?
i know that using tables as layout is a big problem..Why don't professional web designers use tables for layout anymore? and what are the alternatives in CSS that i can use and will be the best alternative to tables??
I am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
Case : a templatefield Text Box created by class TemplateHandler and added to the composite
control Grid .how to bind it to the DataSource Object of the Grid Class ?
I have to use inline code for an aspx page and I need to use a custom server control that is defined in the same aspx page but the control does not get processed as a server control. it gets returned as is as static html tag.
View 3 RepliesHow would I add a (dropdown) list of available values for a custom server control property?
(Just like 'Visible' property of most controls has valid values of 'True/False' and nothing else can be entered or selected)
I am creating a custom server control, and I am wanting to include a JavaScript file in the dll file when the control is built. I have tried suggestions from the following websites:[URL] But after following the directions, If I use firebug to see what errors show up, the JavaScript functions that are being called all say "goNext is not defined" which leads me to believe the JavaScript file is not being added correctly.
Some information on what my control looks like
I have the JavaScript File in a folder called Script. The namespace of the project is CustomControl, and the Name of the project is MaskedDateTextbox.
In my AssemblyInfo I have the following:
<Assembly: AssemblyVersion("1.0.*")>
is it posible to add client side functionality to a custom server control in vb.net?i am looking at msdn library and there is no code for vb :/ http://msdn.microsoft.com/en-us/library/aa719700%28v=VS.71%29.aspxI fount this on MSDN Library Adding Client Capabilities to a Web Server ControlWhat i'm trying to do is to add some client functionality to my control, so that you can get or set some properties/values on client side. From the above link i see that this is doable with Ajax Server Control, but i don't have it, i have Custom Server Control. Can i do this with Custom Server Control and how?
View 16 RepliesI've build a custom server control inheriting from WebControl. Basically it is a kind of button. All is working perfectly except one thing: the PostBackUrl is inoperative.
I probably forgot to implement something. Actually I just added the property PostBackUrl. Probably I should also implement an interface of call something.
i registered an image in AssemblyInfo.cs like this:
[Code]....
now i want to initialize that image in css file for background-image but it dose'nt work.
my css file is:
[Code]....
i also try with this :
[Code]....
I know that how to create custom control and add custom property.
I want to create property like DataSource to my custom control.
