I am developing on application in that i have taken one list box and getting data to it using an object source.up to this stage it is fine.I need to compare these value what i get into list box and need to represent data in to a report viewer ..how to get these values from objectsource.i m new to c# i placing the code.
[Code]....
I have an object data source that is being used by an rdlc report, and the object data source uses a filter that is built from session variables passed to the page.
The report displays correctly, with the filter applied; however, I want to mark each of the rows as "printed" in a bit field in the database table.
In the table adapter, I have the following Update command that is used by the object data source:
UPDATE dbo.WorkOrder
SET boolWorkOrderPrinted = 'True'
WHERE (WorkOrderID = @Original_WorkOrderID)
And in the Page Load event, I run:
ObjectDataSource1.Update();
However, no records are updated.
my query is SELECT a.HD, a.HEAD, a.SH, a.SUBHEAD, a.TRK, a.TRACK, a.TGT, a.TARGET, a.PDC, a.DT_RELEASE, a.STATUS, a.CO
FROM V_HIERARCHY1 a
my data is ,HR HR Rec Records Leave Leave Records HRL.0001 Policy and Process for leave record. 27.06.2010 30.06.2010 WIP Edlink
HR HR Rec Records Leave Leave Records HRL.0002 Quarterly Review 01.07.2010 04.07.2010 Planned Edlink
HR HR DB Database SAL Salary DDS.0001 Calculation of Monthly salary 08.08.2010 09.08.2010 WIP Edlink
HR HR Rec Records Ind Induction Records HRI.0001 Completion of dossiers. 08.07.2010 10.07.2010 WIP Edlink
HR HR DB Database Emp Employee HDE.0001 Offer letter 06.07.2010 09.07.2010 WIP Edlink
my outout is ,HR
REC
LEAVE
HR1
REC1
LEAVE1
I was looking at the options in Intellisense for the properties used with a parameter for the Object Data Source. There is one that I don't understand how it would be used. explain, or recommend an article, about the DB Type is for and how it would be used?
View 2 RepliesTraditionally with an Object Data Source, the wired up class will have its public properties available for binding (i.e. Gridview columns, etc.) which works well. But what if one of my wired up business objects has a property that is an object itself; can I drill down to a property on that object property and still use it?
So in additiona to the traditional:MyBusniessObject.OrderID...I want to use:MyBusniessObject.Customer.NameID
Your 1st response might be to just wire up the 'Customer' class, but I need properties both on 'MyBusinessObject'and 'Customer'. I do not think this can be done, as the ODS will not display properties on an object instance property. I have tried manually typing in the drilled down value as well, but that wasn't a success either.
I have an insert that uses an object data source with out the direction property set and it works fine. I noticed the direction property though and wondered if I should use it.Should the direction property for the parameters of an object data source be used with a simple CRUD operations?
View 3 RepliesI'm trying to understand when to use the type property and when to use the dbtype property. I looked online but couldn't find a good article that said when and why.
View 3 RepliesWhen my page is first loaded i receive error message stating to the effect
cant find Email for GetInvoicesByVendor.
this refers to a function in another class file:
Public Shared Function GetInvoicesByVendor(ByVal Email As String, ByVal vendorid As Integer) _
As IEnumerable
yet i only want to execute this function during the button click event and not when page is first loaded with the following parameters:
vendorid.Text = 1
txtcustomerid.Text = test@yahoo.co.uk
My objectdatasource is declared as follows:
<asp:ObjectDataSource ID="ObjectDataSource1" runat="server"
OldValuesParameterFormatString="original_{0}"
SelectMethod="GetInvoicesByVendor" TypeName="InvoiceDB">
<SelectParameters>
<asp:ControlParameter ControlID="txtcustomerid" Name="Email"
PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="vendorid" Name="vendorid" PropertyName="Text"
Type="Int32" />
</SelectParameters>
</asp:ObjectDataSource>
I created a class library: PRTreatmentReviews. I created a reference for the class library on the website. I checked the property pages and the reference to the class is there. I put objectdatasource on a page and tried to pick up the PRTreatmentReviews class but it's not there? The Class
[Code]....
I'm an experienced PHP programmer that is new to ASP.net (C#). I'm trying to figure out how to do a manual echo of a specific field from an SQL database and was wondering how you do an if condition in case the field would meet certain criteria ?
What I want the script to do is check in the database if a certain condition is activated, then the html page should echo a windows media player object with the source of the video coming from the database itself ( $line[Video], and if the condition isn't active then either don't echo the player or just echo an old video (in the script I'm just printing a message).
in PHP:
[Code]....
I've posted the same question in the Object Data Source forum. This is a link to it http://forums.asp.net/t/1554083.aspx. Maybe I should've posted here to begin with. There seemed to be some overlap so I wasn't sure which was the best on to post the question in.
I'm trying to get a better understanding of how I could've designed my app so that the Object Data Source could work with the properties of my business objects. Please read the other post to see how it's currently being done. Sorry for the link to the other page. I didn't want to post a bunch of duplicate information. I would love to get some suggestions for alternative ways of doing this.
I have extended GridView in order to have consistent look & feel, paging and sorting. However, when the page is first time loaded, the select method is getting called twice. It works fine when i move between pages in pagination.
Note, i am using Asp.net 2.0.
i wanted to retrieve things from the data base and perform mathmatical operations on it then post it to the user, so i was told to use the bullited list and bind it to the object dataSource
how to perform such thing??
I populate a DetailsView from an ObjectDataSource that is coded in a class - meaning that the ods Select, Update, Insert and Delete are class methods. The selected record is set to come from a GridView.SelectedValue.
My problem is that when the page loads the code crashes. I am pretty sure I know why: the DetailsView is pulling from a class object and instead of using the existing class object it instansiates a new one which is empty.
Here is the details view code:
[Code]....
Here is the odsDetailsView_1:
[Code]....
As you can see from the code the odsDetailsView gets it's information from a class object "Match". The detailsview is not controlled by any code behind.
I have the web page that meet the problem. There exists a gridview and filtering. When Select all by using function A, it is OK. when Filter by using function B, it cannot filter and return no rows. When Select all again, it is OK. I have tested that function B can return the corrected filtered rows. But when databind in the web page, it cannot show and no error?
<ContentTemplate>
<asp:GridView ID="gvwBOM" runat="server" DataKeyNames="ProductID"
AutoGenerateColumns="False" DataSourceID="objBOM" AllowPaging="True"
AllowSorting="True" BorderWidth="0px" CellPadding="3" CellSpacing="1" CssClass="grid-view"
OnRowCreated="gvwBOM_RowCreated"
OnRowCommand="gvwBOM_RowCommand"
OnDataBound="gvwBOM_DataBound" >
.........
<asp:ObjectDataSource ID="objBOM" runat="server"
SelectMethod="GetALTBOMs"
SelectCountMethod="GetALTBOMsCount"
EnablePaging="true"
SortParameterName="SortExpression"
TypeName="QI.BLL.WMS.ALTBOM" >
private void FillGridView(string filter)
{
if(filter == "0")
{
objDataSourceSelect="Afunction";
this.objBOM.SelectParameters.Clear();
}
else
{
objDataSourceSelect="Bfunction";
this.objBOM.SelectParameters.Clear();
this.objBOM.SelectParameters.Add("productSupplimentID", ddlTmp.SelectedValue);
}
this.objBOM.SelectMethod = objDataSourceSelect;
this.objBOM.SelectCountMethod = objDataSourceSelect + "Count";
this.gvwBOM.DataBind();
}
i made a small n-tier webapplication, a DATA project with my business objects a DA project with my datacces logic and a GUI project woth my website. For the CRUD operations on my main tables I use a lot of listviews, that works fine but when data grows its slows down.I used already used optimal paging & shared collection's to preventing database acces if data is already loaded en that helps alot.But I see when a user select the EDIT command the select of my listview is performed what is not needed, also when the user than select cancel the select is again called , is this normal behavior or do I made a mistake in program logic somewhere because this behavior is slowing my application down.
View 1 RepliesThis is my query
EXEC sp_configure 'show advanced options', 1
RECONFIGURE
GO
EXEC sp_configure 'ad hoc distributed queries', 1
RECONFIGURE
GO
insert into OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;
Database=D:TestDBFirst.xls;;HDR=YES',
'SELECT * FROM [Sheet1$]')
select * from MasterData
And this error comes
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Unspecified error".Msg 7303, Level 16, State 1, Line 1 Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
I am running:
Windows Server 2008
MS SQL Server 2008
MS SQL Server Native Client 2008
I need to create an ODBC Data Name Source. The instructions on microsoft site are not explicit enough.
Iam using DETAILs VIEW TO insert data i have several controls inside Using sql datasouce to insert the data. How can i achieve this?
View 2 RepliesI have a SQLDataSource on an ASP.Net C# page. I want the ability to add a Control Parameter based on a DropDown List that will either display records that are either NULL or Not NULL In a Column. I have the following Code Snippet:
SelectCommand="SELECT [PATID], [LastName], [FirstName], [UIN], [Rate], [Account], [Project], [Supervisor], [HireDate], [Assistantship], [Hourly], [FundingStartDate], [FundingEndDate], [TerminationDate], [Citizenship], [TitleCode], [Email], [Notes],
[SupervisorUpdateEnabled], [SupervisorTargetSemesterCode], [PATCertDate] FROM [PATAccounts] WHERE TerminationDate @Terminated ORDER BY [LastName]"
i am a new user of asp.net and i am a learner so i just want to connect two dropdownlist to data souce and i want that the list item of second dropdown is changed according to change of selected item of first dropdown.
i have connect it to data source successfully it getting chaged items but it happance only when its load then if i select the next item of first one it would not work properly.
I know this sounds odd. I have a SQL DB that I am pulling data from. I have to some math functions to get a percentage. So I am pulling all the data in my code and building a data table with the results. I am then trying to pass this into a chart control that I have, but it fails because the data source is not correct for the chart control. I know that the chart control will accept a SQLDataSource control as a data source because a built a example with it before using it in my project.So my question is how can I use the Data Table as a data source for a SQLDataSource Control? Or is there a way I can pull the data from my DB andapply the math needed in a stored procedure or something similar that I could create the procedure on my SQL server then add a SQLDataSource control to my page and use the stored procedure as the source for the SQLDataSource Control.
View 5 Repliesi had a requirement for dynamic sorting so i wanted to assign order by.. dynamically depending on what column is clicked for sorting
i tried to modify the sql data source command
in ds selecting event by using
e.command.CommandText=modifiedCommandHere; but it doesnt work as it always picks up selectCommand specified in aspx page
I think I'm getting mad here...I thought this should be super simple, but I just can't figure out how to do that.This is what I'm trying to do:I want to create an rdlc report using the ReportViewer control in ASP.NET 4 (VS 2010), and, as its datasource, use a class with some properties.I tried everything I can think of, but I just can't figure this out. All the docs I found state that the object should appear in the DataSource pane of the website, but I can't make it appear there.I would like the fields of the class to appear in the report desiger so I can use them - but I can't do that either.Using the designer, I can only define new dataset - I don't want to use dataset, but business objects!So - how can I do that? Do I have to use some kind of DataSource control? How can I make the report designer know about the business object?
View 2 RepliesI am writting a website using .net in some of my pages I need to use datagrid for showing some datas and for binding my data to datagrid I use object datasource something like below :
//this is
public class userData
{
private long userid = 0;
private string username = null;[code]....
and then in my apsx file I put an objectdatasource and bind the select statement to the GetUsersAmount() and then bind obejctdatasource to my datagrid but I think the way I've chosen is not efficient I just want to hear about your way of doing such these things.