I have an insert that uses an object data source with out the direction property set and it works fine. I noticed the direction property though and wondered if I should use it.Should the direction property for the parameters of an object data source be used with a simple CRUD operations?
View 3 RepliesTraditionally with an Object Data Source, the wired up class will have its public properties available for binding (i.e. Gridview columns, etc.) which works well. But what if one of my wired up business objects has a property that is an object itself; can I drill down to a property on that object property and still use it?
So in additiona to the traditional:MyBusniessObject.OrderID...I want to use:MyBusniessObject.Customer.NameID
Your 1st response might be to just wire up the 'Customer' class, but I need properties both on 'MyBusinessObject'and 'Customer'. I do not think this can be done, as the ODS will not display properties on an object instance property. I have tried manually typing in the drilled down value as well, but that wasn't a success either.
I was looking at the options in Intellisense for the properties used with a parameter for the Object Data Source. There is one that I don't understand how it would be used. explain, or recommend an article, about the DB Type is for and how it would be used?
View 2 RepliesI'm trying to understand when to use the type property and when to use the dbtype property. I looked online but couldn't find a good article that said when and why.
View 3 RepliesI am developing on application in that i have taken one list box and getting data to it using an object source.up to this stage it is fine.I need to compare these value what i get into list box and need to represent data in to a report viewer ..how to get these values from objectsource.i m new to c# i placing the code.
[Code]....
I have an object data source that is being used by an rdlc report, and the object data source uses a filter that is built from session variables passed to the page.
The report displays correctly, with the filter applied; however, I want to mark each of the rows as "printed" in a bit field in the database table.
In the table adapter, I have the following Update command that is used by the object data source:
UPDATE dbo.WorkOrder
SET boolWorkOrderPrinted = 'True'
WHERE (WorkOrderID = @Original_WorkOrderID)
And in the Page Load event, I run:
ObjectDataSource1.Update();
However, no records are updated.
my query is SELECT a.HD, a.HEAD, a.SH, a.SUBHEAD, a.TRK, a.TRACK, a.TGT, a.TARGET, a.PDC, a.DT_RELEASE, a.STATUS, a.CO
FROM V_HIERARCHY1 a
my data is ,HR HR Rec Records Leave Leave Records HRL.0001 Policy and Process for leave record. 27.06.2010 30.06.2010 WIP Edlink
HR HR Rec Records Leave Leave Records HRL.0002 Quarterly Review 01.07.2010 04.07.2010 Planned Edlink
HR HR DB Database SAL Salary DDS.0001 Calculation of Monthly salary 08.08.2010 09.08.2010 WIP Edlink
HR HR Rec Records Ind Induction Records HRI.0001 Completion of dossiers. 08.07.2010 10.07.2010 WIP Edlink
HR HR DB Database Emp Employee HDE.0001 Offer letter 06.07.2010 09.07.2010 WIP Edlink
my outout is ,HR
REC
LEAVE
HR1
REC1
LEAVE1
When my page is first loaded i receive error message stating to the effect
cant find Email for GetInvoicesByVendor.
this refers to a function in another class file:
Public Shared Function GetInvoicesByVendor(ByVal Email As String, ByVal vendorid As Integer) _
As IEnumerable
yet i only want to execute this function during the button click event and not when page is first loaded with the following parameters:
vendorid.Text = 1
txtcustomerid.Text = test@yahoo.co.uk
My objectdatasource is declared as follows:
<asp:ObjectDataSource ID="ObjectDataSource1" runat="server"
OldValuesParameterFormatString="original_{0}"
SelectMethod="GetInvoicesByVendor" TypeName="InvoiceDB">
<SelectParameters>
<asp:ControlParameter ControlID="txtcustomerid" Name="Email"
PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="vendorid" Name="vendorid" PropertyName="Text"
Type="Int32" />
</SelectParameters>
</asp:ObjectDataSource>
I created a class library: PRTreatmentReviews. I created a reference for the class library on the website. I checked the property pages and the reference to the class is there. I put objectdatasource on a page and tried to pick up the PRTreatmentReviews class but it's not there? The Class
[Code]....
I am storing a custom "Organisation" object as a session variable. One of the properties of the Organisation object is "OrganisationID" (integer). I have a DataSource that requires a parameter value to run, and I want to use a SessionParameter to populate this. In a previous version, I stored the OrganisationID directly as a session variable. In that case, I could easily access it like this:
[Code]....
However, how do I now access the OrganisationID property of an "Organisation" type session variable (called "Organisation")? I have tried this, which does not seem to work: <asp:SessionParameter Name="OrganisationID" SessionField="Organisation.OrganisationID" Type="Int32" />
how to pass parameters to the selectmethod property of the objectdatasource control.
View 1 RepliesI'm an experienced PHP programmer that is new to ASP.net (C#). I'm trying to figure out how to do a manual echo of a specific field from an SQL database and was wondering how you do an if condition in case the field would meet certain criteria ?
What I want the script to do is check in the database if a certain condition is activated, then the html page should echo a windows media player object with the source of the video coming from the database itself ( $line[Video], and if the condition isn't active then either don't echo the player or just echo an old video (in the script I'm just printing a message).
in PHP:
[Code]....
Using the properties as defined in a class, how about can I put them into the ParamArray parameters argument of my function. The code as follows:
Public Class MyObject
Public Property Prop1 as string
Public Property Prop2 as integer
Public Property Prop3 as Boolean
Public Sub AddNewMyObject
MsSQL_ExecuteNonQuery("StoredProc_AddNewMyObject", ________________?)
End Sub
End Class
Protected Function MsSQL_ExecuteNonQuery(ByVal storedProc as string, ByVal ParamArray parameters as object())
'Some Code here.
End Function
I am trying to get an asp:SessionParameter of a SelectParameters, to use a property of an object in session
instead of having a string in the session like Session["CustomerID"]
Something like Session["Customer"] where the property is ((Customer) Session["Customer"]).CustomerID)
My code:
<asp:sqldatasource id="SqlDataSource1" runat="server" connectionstring="<%$ ConnectionStrings:DBConnectionString %>" xmlns:asp="#unknown"> SelectCommand="SELECT * FROM getStoreCustomers (@customerID,@week,@day)"
ProviderName="System.Data.SqlClient">
<selectparameters>
<asp:sessionparameter name="customerID" sessionfield="Customer" /> ?????? (what is the syntax to pass the property here?)
<asp:controlparameter controlid="ddWeek" defaultvalue="-1" name="week" propertyname="SelectedValue" /> <asp:controlparameter controlid="ddDay" defaultvalue="-1" name="day" propertyname="SelectedValue" /> </selectparameters>
The class I use is like any other class (but serializable)
[Serializable]
public class Customer
{
public int CustomerID
{
get;
set;
}
}
I have a gridview and I have an edit template for one control. I have a drop down box in this edit template so that you can select a value from it and then when you hit 'Update' the value from the drop down box is committed to the updated record. Unfortunately when I do hit the update button I get a fault that the "Status" field cannot be null.
Here is the code that picks the value from the drop down value and assigns it to the new values list:
[Code]....
I add a user control dynamically (which only contains a table) to the Panel:
<asp:Panel ID="panel" runat="server"
ScrollBars="Horizontal" Width="160" Direction="LeftToRight">
</asp:Panel>
when I add e.g. two user controls, they have vertical direction. Why ? I want them set from left to right (horizontally)
I have created a gridview at runtime. its working fine when i load the grid first time. after when i am selecting next value from ddl to load grid according to that option(selecting from dropdown list and coresponding values showing in grid) showing error that "A field or property with the name 'datafield name' was not found on the selected data source." might be i am getting this error becuze the privious value is not being cleared" can anybody help me with this problem.
View 2 RepliesDescription: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: A field or property with the name 'ID' was not found on the selected data source.Source Error: An unhandled exception was generated during the execution of the current web request.
[Code] ....
My code:
Page Title="Log In" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
CodeBehind="Login.aspx.cs" Inherits="WebApp.Account.Login" %>
<script runat="server">
protected void LoginButton_Click(object sender, EventArgs e) {
[Code] .....
I'm attempting to load a GridView dynamically on a button is pressed.The gridview has AutoGenerateColumns="True" (set in skin definition) and has a declarative column definitions as follows:
<asp:GridView runat="server"
SkinID="GridViewDetail" ID="gvReport"
DataKeyNames="dateofcompletion">
<Columns>
[code]...
This all works fine the first time, but as soon as I select a different ddlCampaign item, it throws the"A field or property with the name 'FieldName' was not found on the selected data source" ERRORI kinda understand that it has retained the column mappings from the previous datasource assignment/binding and because the new datasource has different column headings it is throwing the error. What I can't seem to achieve is a clear or reset of defined gridview columns before adding the new columns. I cannot clear all columns because part of the GV defn is declarative.e.g.
gvReport.Columns.Clear();
gvReport.AutoGenerateColumns = true;
I have also tried clearing the previously added columns before new assignment/binding but it gives the same error.e.g.
for (int i = 2; i < gvReport.Columns.Count; i++)
{
gvReport.Columns.RemoveAt(i);
}
I am trying to bind the XML data to a datagrid from an XML file. I don't know why I am getting the message: "A field or property with the name 'User_x0020_Name' was not found on the selected data source."
The "User_x0020_Name" field does exist in the XML file. This is a portion of the XML file.
<?xml version="1.0" encoding="utf-8" ?>
<DataSet xmlns="http://www.----------.com">
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-[code]...
this is the error: A field or property with the name 'idcode' was not found on the selected data source.and what i am trying to do is this... i don't understand that. i never used DataSet before.
[Code]....
[Code]....
[Code]....
[Code]....
I've posted the same question in the Object Data Source forum. This is a link to it http://forums.asp.net/t/1554083.aspx. Maybe I should've posted here to begin with. There seemed to be some overlap so I wasn't sure which was the best on to post the question in.
I'm trying to get a better understanding of how I could've designed my app so that the Object Data Source could work with the properties of my business objects. Please read the other post to see how it's currently being done. Sorry for the link to the other page. I didn't want to post a bunch of duplicate information. I would love to get some suggestions for alternative ways of doing this.
I have extended GridView in order to have consistent look & feel, paging and sorting. However, when the page is first time loaded, the select method is getting called twice. It works fine when i move between pages in pagination.
Note, i am using Asp.net 2.0.
i wanted to retrieve things from the data base and perform mathmatical operations on it then post it to the user, so i was told to use the bullited list and bind it to the object dataSource
how to perform such thing??