I need to get one record from rows. For example:
DB:
id, name, age, nick, gender , etc...
1, John, 18, gobb, M, ....
2, Andrew, 22 , AND, M, .....
3, Simon, 35, Lucky, M, ......
How to Get name (For example Simon) from DB and enter it into label? Or perhaps this is impossible?
I'm attempting to hook up multiple DropDownLists to a single SQLDataSource, but I want the SQLDataSource to return different rows depending on which DropDownList it is populating.
Say I have a table full of names (we'll call it TABLE_NAMES):
[code]....
....and I have two dropdown lists, one with a list of person names and one with a list of dog names.
Is there a way to link up each of these dropdown lists to a single SQLDataSource and use the SelectParameter to differentiate between which records I want returned for each dropdown list?
To make matters worse, these dropdown lists will appear within a GridView control....so there will be multiple instances of each dropdown list depending on how many rows there are in the GridView.
I have a sqlDatasource with a SelectParameter ControlParameter linked to a dropdownlistIs there an a way to select all records like *
[Code]....
So I can select records by year, but is there a value that will select all records for the @Year Parameter so I can display all records?
I have one SqlDataSource control as DataSet with enable caching in one page aspx. Filtering is applied to this SqlDataSource control, so that the page always returns one record data.
My question: How to get the record data value from SqlDataSource control (one record data value) and store it as String variable?
I have a stored procedure that returns 3 tables within the single recordset it returns. If I set a SqlDataSource to get data from this procedure, it works, but it only returns the first table. I want to have a GridView display the data from the 2nd or 3rd table using a SqlDataSource, but I can't figure out how to specify a particular table.
While there are some posts discussing this out there, I can't get a definitive answer about whether or not this is even possible (?). In a worst-case scenario, I can create another SP that only returns the 3rd table - but that creates a little maintenance headache that I would prefer to avoid.
Here is the sqldatasource config code: <asp:SqlDataSource ID="SqlDataSource1" runat="server"
View 1 RepliesI am trying to tie a sqlDatasource to a Stored Procedure. The stored procedure looks like...
[Code]........
I have a parts table (ID, PartName, Category). I have an Engine table that has 10 columns to specify the 10 main parts that comprise the engine (EngineID, PartA_ID, PartB_ID, PartC_ID...).
I want to make only one trip to the DB to pull all the rows, then filter by category for each PartA, PartB, etc ddl. how to do this?
For context: First of all, I am new to LINQ, as I have been using SubSonic for quite some time now.
I have two tables, Users, and Affiliates. They both have a very typical schema. The FK that joins them is the UserId field, which is in the Affiliates table. I want to create a LINQ query that pulls the Username from the Users table using the AffiliateId value. The AffiliateId is a primary key of the Affiliates table.
I have tried to accomplish this using many variations of the following code:
[Code]....
In the above query, I expect to get a single row result set. However, I instead receive the entire table of results.
How can I make this work? I have yet to see an example or article out there to do what I am trying to do.
how to Search a record from SqlDataSource
[code]....
I have a gridview and a SQLDataSource control. In my gridview I have 2 commandfields "Edit" and "Delete"
The "Edit" command field works as expected. Using the "Delete" command field I get the error below.
Server Error in '/DataControls' Application.
The DELETE statement conflicted with the REFERENCE constraint "FK__titleauth__au_id__0CBAE877". The conflict occurred in database "pubs", table "dbo.titleauthor", column 'au_id'. The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: The DELETE statement conflicted with the REFERENCE constraint "FK__titleauth__au_id__0CBAE877". The conflict occurred in database "pubs", table "dbo.titleauthor", column 'au_id'. The statement has been terminated.
Source Error:
[Code]....
Stack Trace:
[Code]....
So I found an example on how to search gridview using filterexpressions on this site (Filter GridView with TextBox using FilterExpression in SqlDataSource in ASP.Net), but now if I try to search with an apostrophe in the textbox, the code fails.
Here's the link to the the article/source - [URL] .....
I am counting from a table for that i have written code as below
protected void get_Id_Afterpoint()
{
int counter = 0;
string strSql = "select count(*) as ID from tblEnergy where ID=?";
OdbcCommand com = new OdbcCommand(strSql, con);
com.Parameters.AddWithValue("ID", DropDownList1.SelectedValue);
OdbcDataAdapter oda = new OdbcDataAdapter(com);
DataTable dt = new DataTable();
oda.Fill(dt);
if (dt.Rows.Count == 0)
{
lblID2.Text = "1";
}
else
{
counter = dt.Rows.Count;
counter = counter + 1;
lblID2.Text = Convert.ToString(counter);
}
}
there is no record related to DropDownList1.SelectedValue. but as i am counting if(dt.rows.count) and i put break point on the bolded part it shows 1 record. how it can be possible?
I am creating an album using the following stored procedure, which returns the primary key for the newly created record:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[fpa_sp_albums_update_insert]
@album_id int,
@album_name nvarchar (50),
@album_descr nvarchar(250),
@album_img_cover_id_FK int,
@album_creation_date date
AS
If @album_id > 0
UPDATE [fpa_albums]
SET
album_name=@album_name,
album_descr= @album_descr,
album_img_cover_id_FK = @album_img_cover_id_FK,
album_creation_date = @album_creation_date
Where ((album_id = @album_id))
Else
INSERT INTO [fpa_albums] (
album_name,
album_descr,
album_img_cover_id_FK,
album_creation_date)
VALUES (
@album_name,
@album_descr,
@album_img_cover_id_FK,
@album_creation_date)
Return SCOPE_IDENTITY();
I execute the above stored procedure using the SQLHELPER. The VB.NET code for the page is as follows:
[Code]....
However, the createdAlbumID always shows -1 instead of the id for the newly created album.
i have two sqldatasource controls. one i use to display data in textbox's ,filter'd by a select parameter in page behind code. Once checked, i want to copy this data to the other datasource ,by selecting checkbox.Then display this data in detailsview control.
At present the two datasource controls declared , render data to the page simultaneously during pageload. I want to first check data in textbox's from first source, before second datasource is rendered to screen. note, both are filtered by a page variable. i wish to leave the textbox datasource control in situ, as other controls and code depend on it.The other detailsview datasource is my problem?
I have developed one simple application in that i am using mysql database. but my database size more thatn 4,50,0000, as well as ecah and every second my database is updated i.e record ll be added to the table how can i get the details for one single click.
View 1 Repliesso how to bind detail view to a single record custom class?
[Code]....
Apparently I can do it this way.
[Code]....
But I don't think my way is a proper way..
I have a listview that has been constructed using tables. I have set the DataKeyNames="SomeTextField" among others. This column is currently not visible in the ListView.
I'd like to populate a textbox on the click of any listview record with the contents "SomeTextField" column.
i open a sqldatasource for binding on listview.
I would like also to read a field on first record for print it.
How can i access to my sqldatasource from code behind ?
I'm very new to ASP.NET (have a decent VB6/ADO background though) and have a question. I have a web app that is built in ASP.NET and VB.NET. I have defined a SqlDataSource and was wondering how to (using VB) find a value within a recordset. Back in the VB6/ADO days I would do something like "ADODC1.Find ("Field = value")
View 1 Repliesi am using gridview where it fetches datas from sqldatasource, i want to made some calculations wit some fields from tables and then need to show in gridview. How to fetch single column values from sqldatasource. I only know this code which are used after displayed in gridview
Gridview1.Row.Cells[0].text.toString()
I have asked similiar question before where I have two control on the page header says "username" and "gender". User can select both the control or either one and the page will execute searching based on the criteria supplied. So if username supplied
SELECT * FROM [this_table] WHERE username = @username
and if gender supplied
SELECT * FROM [this_table] WHERE gender = @gender
and if both supplied
SELECT * FROM [this_table] WHERE username = @username AND gender = @gender
I know this sounds not very complicated but in my case, I am having like more than 10 controls up there. It is something likeusername, gender, age, date of brith, title, father name, frst name, last name, blur blur blur and it's a lot then I started to lost. if i were to use if else caluse on code-behind and produce query, it would end up writing a lot of if-else and if i use stored procedure (with if-else) then my stored procedure would contains a lot of if-else statement. I am fairly new to this concept and if I'm on the wrong track, please correct me. Is there any better way to save my hair without actually going through each
if-else statement to build the query ?p.s. I'm using GridView and SqlDataSource command to display the result back on .aspx page.
I am trying to check whether a username exists in my database before inserting the new row & display a message to the user if it does.
On my SqlDataSource my InsertCommand looks like this:
InsertCommand="IF NOT EXISTS (SELECT * FROM Users WHERE UserName = @UserName) BEGIN INSERT [Users] ([UserName], [FirstName], [LastName], [City], [State], [Country], [CompanyName], [Active], [PasswordHash]) VALUES (@UserName, @FirstName, @LastName, @City,
@State, @Country, @CompanyName, @Active, @PasswordHash) END"
This works as expected: If the username is unique, the row is created.
If the username already exists, the row is not added.
The problem is, if the row already exists, the insert is rejected but the user is not notified.
So my question is, is there a way I can notify the user?
Maybe something like: InsertCommand = "If Not Exists (select....) Begin Insert...Else Notify User Somehow End This is a basic database, I'm not using the built-in membership provider nor will be.
How do I programmatically add ParameterCollection ?
[Code]....
i use below sqldatasource for search within a gridview and it is working fine.i just add this control and set gridview datasource id to sql datasource id .but i need the same in codebehind dynamically.i need like this becuase i need to search in three textbox but before i use one textbox. so could someone show me a example how i add a sqldatasourse in code behind and set filter parameter for search from a gridview.
[Code]....