Ok...I am on my local developement machine.....my website and sql server are hosted else where. All I am trying to do is connect to my database from my visual studio 2010. I have attached the screen shot of my error. All I did was do a fresh install of windows 7 ultimate on my machine....install visual studio 2010 and go to work........and i get this error.
View 3 RepliesI am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio.I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem.
I have now set Named Pipes and TCP/IP back to disabled. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message:
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
My first question here is: why is it returning a Named Pipes error? Why isn't it using Shared Memory? It seems like it is not listening on Shared Memory for some reason?When I set Named Pipes to enabled and try to connect, I get the same error message.My windows account is does not have administrator priviliges on my computer.
I had to format my hard disk and reinstall the Visual Studio 2005 Enterprise and SQL 2005 Standardprograms.
While my program worked perfectly before and still works ok on my second computer, I get the following error message on the formated computer:
Parser Error Message: Type 'System.Web.UI.WebControls.Parameter' does not have a public property named 'DbType'.
Source Error:
Line 82: <asp:Parameter Name="Olho" Type="String" />
Line 83: <asp:Parameter Name="image" Type="String" />
Line 84: <asp:Parameter DbType="Date" Name="inicio" />
Line 85: <asp:Parameter DbType="Date" Name="termino" />
Line 86: <asp:Parameter Name="pageId" Type="Int32" />
Source File: /0_oserigrafico/Default.aspx Line: 84
In this case I use a datasource control for a datalist and the parameter list is being built ba the system.
The DBType is created for the smalldatetime feild
how do I add the property named 'DbType'.
Trying to move a project from Windows Server 2000 and IIS 6 to Winders Server 2008 and IIS 7. I am getting the following error:
Could not find permission set named 'ASP.Net'
AppPool is set to .NET 4.0. I don't see a setting in the actual application though like you had to do in IIS 6?
I have a solution in Visual Studio 2008 with 3 projects. One Web Application and 2 class libraries. The entity framework model is in a class library and the start project is the web application.
I used to have this problem:
"The specified named connection is either not found in the configuration, not intended to be used with the EntityClient provider, or not valid."
I fixed it copying the connection string from the App.config of the class library where the entity model is located to the web.config of my web application (start project).
I found that workaround posted here:
[URL]
how can i avoid using the connection string from the web.config and use the one from the app.config where the entity model is located?
I will try and be brief, I am finding when trying to create a custom route with a name and url of properties that my ASP.NET MVC app is returning a 404 file not found when hitting the route.I have deduced this down to most likely be caused by the fact I have a folder on disk called Properties which is of course a common asp.net folder which is automatically created. I have found someone else who has suffered from this problem on SO, but looks like there has been no resolution, only to name your route something different!
Surely this is an oversight, or there must be a workaround? Obviously there will be many common directories you may need as routes and/or folders interchangeably, some of which we already know like Properties probably can't be deleted! I also understand we need to honor real folders as URLs too, but I feel routing should take priority before looking at folders on disk.
Error:
Executed as user: MACSTEELUSA.COMsa. ...9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:00:17 PM Error: 2010-06-02 20:00:18.56 Code: 0xC0202009 Source: CRM_ORACLE_ARSUMMARY Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client
and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2010-06-02 20:00:18.58 Code: 0xC020801C Source: Data Flow Task Source - Query [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireCon... The package execution fa... The step failed.
Tasks Taken:Went to this folder checked for tnsnames.ora file but it is in good shape.
C:ORACLEproduct11.2.0client_1
etworkadmin
I m trying to save files like pdf, word, excel etc... into sql express, but m getting this error in my web page:An attempt to attach an auto-named database for file C:Usersmalek.safaDocuments est vbSavingFileInDBSavingFileInDBApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
m not getting errors inside my code, just this one appearing on the web page.
System.Data.SqlClient is not filling DataTable named "Person" Go to [URL] Webpage message reads: Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'Person'. Source Error:
[Code]....
Source File: d:hostingcforedDefault.aspx.vb Line: 41 Stack Trace:
[Code]....
i am usingVWD 2010 andwant to create a website supported under .net 3.5. The deafault mater page has the loging pgaes already set up (.net 4.0) which is very good and helping to start. But once i changed my project to run under .Net 3.5 , i could not have the account register webpage working and getting this error : Parser Error Message: Type 'System.Web.UI.WebControls.CreateUserWizard' does not have a public property named 'LayoutTemplate'.
View 2 Replies im working with visualstudio 2005 and sql server 2005 c#,and i tried to insert an items to the sql but it gave me this error
Application server error '/ WebSite6'.
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students".The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.
The statement has been terminated.Description: The exception is unhandled occurred during the implementation of the current web request. the stack trace for more information about the error and where the source code.
Details exception: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students". The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.The statement has been terminated.
This error: Line 243: sql_comm.Parameters.AddWithValue ("@ studentId", Convert.ToInt32 (id));
Line 244: sql_comm.Parameters.AddWithValue ("@ CourseId", Convert.ToInt32 (ListBox3.Items [j]. Text.ToString
()));
Line 245: sql_comm.ExecuteNonQuery ();
Line 246: split_listbox2 ();
Line 247: sql_conn.Close ();
Source File: c: Documents and Settings Ronen My Documents Visual Studio 2005 WebSites WebSite6 SiteMembers CourseSignUp.aspx.cs line: 245
this it the code :[Code].... !
I have written some vb code that inserts whatever has been written on my page into an Access database. Only problem is VWD throws up an error saying that the syntax of my SQL statement is wrong. I am 95% sure that this statement is correct because when I saw the statement in Text Visualizer and tried that statement in MYSQL the data went in perfectly.
I have pasted the code below:
strSQL = "INSERT INTO User (UserID, FirstName, LastName, Password) VALUES "
I am using the C# code you posted in the link below,
[URL]
but when I run it I am getting the error:
"A column named 'link' already belongs to this DataTable: cannot set a nested table name to the same name."
Following is the error I am getting while accessing some of the pages on my website.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It is trowing an exception and giving the about mentioned error.
i get error A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
View 4 RepliesI have a website which displays news information. It displays the titles at the default (home) page and when click it shows the full story.
I use object datasource to load the news titles.
Now, sometimes the database server lose its connection or changes to the database and it affects the whole website because error is reported at the Application level. I would like the Home page to still show but the section where the news titles usually appears will now show an error message that the database is down (Refer below my part of my code).
How can I achieve that?? I tried to do that at the page_error level but it displays nothing. I don't want to pass the error to application level, I want to handle at datasource load/binding level so that it display this error message at the news section and other home website information can still be shown.
[Code]....
I used visual studio 2008 and sql server 2005(for database) in my website project. After finishing my project i used publish to web option and got the files into an folder. I have installed .NET framework ,IIS, i have also set the remote connection ,firewall setting etc. But when i run i.e., In the IIS manager when i click browse it gives me the following error. Can anyone pls tell me what went wrong in this. My code works fine when run on visual studio 2008. Server Error in '/EBUSINESS' Application.
View 1 RepliesCan anyone tell me why I get this error:
I'm trying to output my query results:
SELECT * FROM sites LEFT JOIN pages ON sites.siteid=pages.siteid LEFT JOIN subpages ON Pages.pageid=subpages.pageid WHERE sites.siteID = 1 ORDER BY sites.siteid ASC
using the code:
[code]....
Source Error:
[Code]....
Line 35: Line 36: While reader.Read()Line 37: mydata &= reader.Item("sitename") & " " & reader.Item("pageid") & " " & reader.Item("pagetitle") & "<br>" & reader.Item("subpages.pageid")Line 38: Line 39:
I am getting this error on my Web Server
Event code: 3005, An Unhandled exception has occurred, Event ID 1309
Application domain: /LM/W3SVC/1/Root/GLI Survey-1-129217809326257882, Trust Level: full, application Virtual Path /GLI Survey, Application path c:inetpubwwrootGLI SURVEY, Machine name: WEBSVR
Here is my SQL Data source parameter:
<
top: -197px"
asp:Label
ID="Label3"
runat="server"
CssClass="Label"
Style="left: -304px; position: relative;
Text="On a scale of 0-5 how would you rate:"></asp:Label><asp:SqlDataSource
ID="SqlDataSource1"
runat="server"
ConnectionString="Integrated Security=SSPI;Persist Security Info=False;database=GLIPurchasingSales;Data Source=sqlsvr"
VALUES (@Branch, CONVERT(Varchar(12), GetDate(), 1), @fatigue, @Q1, @Q2, @Q3, @Q4, @Q5, @Q6, @Q7, @Name, @Company, @Comments, @Recommend, @ConComments)"
InsertCommand="INSERT INTO PurchasingSales([Branch], dt, fatigue, Q1, Q2, Q3, Q4, Q5, Q6, Q7, Name, Company, comments,
Recommend, ConComments)
ProviderName="System.Data.SqlClient">
<InsertParameters>
<asp:ControlParameter
ControlID="ddlfatigue"
Name="fatigue"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ1"
Name="Q1"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ2"
Name="Q2"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ3"
Name="Q3"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ4"
Name="Q4"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ5"
Name="Q5"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ6"
Name="Q6"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlQ7"
Name="Q7"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="txtBranch"
Name="Branch"
PropertyName="Text"
/>
<asp:ControlParameter
ControlID="txtName"
Name="Name"
PropertyName="Text"
/>
<asp:ControlParameter
ControlID="txtCompany"
Name="Company"
PropertyName="Text"
/>
<asp:ControlParameter
ControlID="txtComment"
Name="Comments"
PropertyName="Text"
/>
<asp:ControlParameter
ControlID="ddlRecommend"
Name="Recommend"
PropertyName="SelectedValue"
/>
<asp:ControlParameter
ControlID="ddlComments"
Name="ConComments"
PropertyName="SelectedValue"
/>
</InsertParameters>
</asp:SqlDataSource>
This is not occurring for all users. If you need the structure of the database please let me know.
I am getting error messages for the last two lines of the following button click event handler code where I am attempting to create a new record in my Profiles table with 3 column entries:
protected void ButtonSubmit_Click(object sender, EventArgs e)
{
string Callsign = Server.HtmlEncode(Textbox1.Text);
string Password = Server.HtmlEncode(Textbox2.Text);
string Email = Server.HtmlEncode(TextBox3.Text);
DataClassesDataContext db = new DataClassesDataContext();
Profile profile = new Profile();
profile.Callsign = Callsign;
profile.Password = Password;
profile.Email = Email;
db.Profiles.Add(profile);
db.SubmitChanges(profile);
}
The first error message refers to the "Add" statement in the second to last line. It states, 'Syatem.Data.Linq.Table<Profile>' does not contain a definition for 'Add'. The last 2 errors refer to the last line. They state "The best overloaded method match
for 'Syatem.Data.Linq.DataContext.SubmitChanges(Syatem.Data.Linq.ConflictMode)' has some invalid arguments" and "Argument '1': cannot convert from 'profile' to 'Syatem.Data.Linq. ConflictMode'".
Dim connStr As String = " Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=W:PatioOrderApp_DataPatio.mdb"
Dim con As New OleDb.OleDbConnection(connStr)
Dim instr As String = " INSERT INTO tOrders([first_name],[last_name],[order],[comment]) Valuse(?,?,?,?)"
If IsValid Then
Using con
Using cmd As New OleDb.OleDbCommand(instr, con)
cmd.CommandType = CommandType.Text
cmd.Parameters.AddWithValue("first_name", DBNull.Value)
cmd.Parameters.AddWithValue("last_name", DBNull.Value)
cmd.Parameters.AddWithValue("order", DBNull.Value)
cmd.Parameters.AddWithValue("comment", menuDrinks.SelectedItem.ToString)
con.Open()
cmd.ExecuteNonQuery()
End Using
End Using
con.Close()
End If
I suing this code to upload csv file data to sql table.
BULK
INSERT uploadtemp
FROM 'F:ArruniArruniRaj-NathanSchoolcvsparents_with_pupil_adm_nos.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = '
'
)
END
After i upload data each and every data inside double quatation like
"Mr J and Mrs P Abbott"
"Abbott"
"Gemma"
"N00390"
"Olivia Abbott"
"N00595"
"T"
How can i upload data without " . And also i want start upload data start from second row. How can i do that? [URL]
I am using the SQLDataReader to execute a Stored Procedure that accepts two parameters (BuildingTID and Department) to return the appropritae Value in my case The Director of the Department. My problem is I get the following error when I run the code that I added below for review. Let me also add that the user is selecting the values that I am using for the stored procedure from 2 DropDownLists. I am getting it when I try to assign the value that is in the Department DropDown
list to the first parameter.
Dim myParm As SqlParameter = getDirectorsCMD.Parameters.Add("@BuildingTID", SqlDbType.Int, 15).Value = (ddlDepartment.SelectedValue)
Also obviously there are more issues with my code than just the error because the datareader records property is false meaning I am not returning a row
[Code]....
Stack Trace:
[Code]....
[code]....
getting Incorrect syntax near error
I created a PageLoad event, so when the page opens it fills all the fields from a DataSource control. However, the problem is that if the DataSource control is empty (the row does not exist yet) it gives me an error. How do I check that if DataSource Control has a row of data or not?
View 5 Replies