DataSource Controls :: Passing Parameter From Web Page

Mar 16, 2010

I'm experimenting with an example of code that I found in a book. Here is the HTML:

[Code]....

This looks fine in DesignView.

Here is the VB:

[Code]....

The page loads when I hit F5. I enter initials for a state and click the button and get this error message: 'The connectionstring property has not been initialized'. This line is green:

objConnection.Open()

I'm highly confident that the connection srting is correct. Do I need to Dim another variable or something?

View 6 Replies


Similar Messages:

DataSource Controls :: Passing Parameter To Datasource In Code Behind?

Mar 25, 2010

I need to pass the control parameter to Sql Datasource in code behind,

<asp:ControlParameter ControlID="DDL_RType" Name="rtype" PropertyName="SelectedValue"

View 3 Replies

DataSource Controls :: Parameters Seems To Not To Be Passing Parameter To The Control

May 5, 2010

i have the following code

[Code]....

I have debugged the session and the value there is valid , but when i redirect to the page[Code]....

The Parameters seems to not to be passing parameter to the control

View 2 Replies

DataSource Controls :: Passing Column Name As Parameter To Stored Procedure?

Feb 12, 2010

ALTER procedure [dbo].[Sample2]
@Col as nvarchar(1000),
@Value as nvarchar(1000)

[code]...

View 5 Replies

DataSource Controls :: Passing Default Parameter To Stored Procedure ?

Feb 13, 2010

I am using DAAB with stored procedures. I use stored procedures more then once if possible. If I add a parameter later in stored procedure, I have to supply value for this in functions where it is even not being used as well, other wise it shows an error that number of parameters are not same. if I add parameter in last of parameter list in stored procedure and set a default value for it and I may have not to provide value for this from functions where I am not using it.

View 1 Replies

DataSource Controls :: Passing More Than One Parameter From Check Box List To Stored Proc?

Apr 22, 2010

lets say i have check box list like that

Cairo
Alex
Aswan
All

each of them is a check box inside this check box list and i have a stored proc that takes paramter which is the name of the city and gives me a data according to the name of the city (Filter). i wana know if i checkec more that one city how can i pass this to the stored proc eg if i checked on cairo and alex what can i do to make the filter looks like this where city Like 'Cairo' and City Like 'Alex' My Stored Proc takes @City Parameter like this Create Proc xx(@City varchar(2)) how can i pass the 2 cities 2 the stored proc

View 6 Replies

Forms Data Controls :: How To Passing Dropdownlist Value As Parameter To Another Page

Nov 25, 2010

how to passing dropdownlist value as parameter to another page?

View 3 Replies

Passing Page Title Through Parameter

Aug 23, 2010

I am new to ASP.NET, and was wondering how to pass a Page title through a parameter. In classic ASP I could just use something like:

<title><%=Pagetitle%></title> but I cannot seem to get this to work in ASP.NET.

View 3 Replies

Web Forms :: Passing Parameter From One Page To Other

Mar 17, 2011

I am opening one page and sending parameter from one asppage to other using winodow.open method

var retVal = window.showModalDialog("PopupWindow.aspx?SQL=" + document.getElementById(SUCName.concat("txtRetVal")).value +
"&Curr_Date=" + d , null,"dialogLeft=" + XPos + ";dialogTop=" + YPos +
";center=no;status=no;dialogHeight:430px;dialogWidth:420px;resizable=no;help=no");
in my document.getElementById(SUCName.concat("txtRetVal")).value contains:
SELECT ResourceID, ResourceName FROM ResourceMaster WHERE AREA LIKE '%CALICUT%'

but when it access this on PopupWindow.aspx using Request.QueryString("SQL") then first 3 character in LIKE clause gets convert to some ascii character and my query becomes

SELECT ResourceID, ResourceName FROM ResourceMaster WHERE AREA LIKE '�LICUT%'

what is solution to this?

View 7 Replies

MVC :: Passing Parameter From One Page To Another Using Href

Jan 28, 2010

How to pass parameters from one page to another pages using a href.

<a href="#">

View 3 Replies

Passing Parameter To Page Doesn't Work

Apr 23, 2010

The follwoing statement does nto work.

document.all.oFrame.src =
"/mmm/xyz/hello.aspx?ConceptID="&vConceptID&"&ShortName="&vShortName

I have given alert.

alert(
"/mmm/xyz/hello.aspx?ConceptID="&vConceptID&"&ShortName="&vShortName)

IT GIVES 0 AS OUTPUT.

View 4 Replies

Passing Parameter From Page To Flex Application

Apr 22, 2010

I have an asp.net page where I get the user_id from who's logged in. Now I need to pass this user_id to a flex application that runs in an asp.net page as a .swf. How can I get this user_id in a variable in my flex application. Or what is the best way to get the user_id into flex.

View 2 Replies

Crystal Reports :: Parameter Passing From Previous Page?

Nov 26, 2010

I have 2 asp.net pages first page (PaySlipForm.aspx) contains ui elements for getting values from user, second page shows the report depending on the parameters passed from first page. The problem is first time the report shows correctly but when I go back on first page by clicking the back button of browser and changes the selection the report is shown empty only labels are shown.

First Page PaySlipForm.aspx
<asp:DropDownList ID="ddlAllEmployees" runat="server" style="margin-left: 7px"
Height="20px" Width="174px"> </asp:DropDownList>
<br />
<asp:DropDownList ID="ddlMonth" runat="server" Height="23px">
</asp:DropDownList>
<br />
<asp:DropDownList ID="ddlYear" runat="server" style="margin-left: 18px"
Height="23px" Width="77px">
<asp:ListItem>2010</asp:ListItem>
<asp:ListItem>2011</asp:ListItem>
<asp:ListItem>2012</asp:ListItem>
</asp:DropDownList>
<br />
<asp:Button ID="btnShow" runat="server" Text="Show" PostBackUrl="~/Reports/PaySlipViewForm.aspx"/>
Second page is PaySlipViewForm.aspx that has the code
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="True" EnableDatabaseLogonPrompt="False" Height="50px"
ReportSourceID="CrystalReportSource1" Width="350px" />
<CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
<Report FileName="../Reports/PaySlip.rpt">
</Report>
</CR:CrystalReportSource>
---------------------
if (!IsPostBack)
{
int employeeID = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlAllEmployees")).SelectedValue));
int monthID = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlMonth")).SelectedValue));
int year = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlYear")).SelectedValue));
CrystalReportViewer1.SelectionFormula = "{Payroll.EmployeeID} = " + employeeID + " And {Payroll.Month} = " + monthID + " And {Payroll.Year} = " + year;
}

View 4 Replies

Web Forms :: Passing Control Parameter Values From One Aspx Page To A Second

Apr 7, 2010

I have a web form that has drop down controls. These controls are data bound to a database. Now, I would like the results of the selected values to be shown on a new aspx page in a gridview or detailsview.

View 3 Replies

Web Forms :: Call Popup With Passing Parameter Without Page Refresh

Jun 15, 2010

I am using VS 2005 (asp.net 2.0). Currently i am facing a problem everytime onclick button call the popup it will refresh the page. Below is my code, Any suggestion or better idea can do it without refresh

[Code]....

View 2 Replies

Forms Data Controls :: Passing Two Parameter In Javascript

Mar 26, 2011

i am passing two parameter in javascript and open popup window.... but geeting mid value "undefined" here is my code:

<asp:TemplateField HeaderText="comments">
<ItemTemplate>
<a href="javascript:replycomments('<%# Eval("projectid")%>'),('<%# Eval("milestoneserial")%>')">Reply comments</a>
</ItemTemplate>
</asp:TemplateField>

and

function replycomments(id,mid)
{
window.open("replymilestone.aspx?id="+id+"&mid="+mid,"mypage","width=400,height=500,scrollbars=0,menu=0","");
}

this is working fine if i am passing single value like:

<asp:TemplateField HeaderText="comments">
<ItemTemplate>
<a href="javascript:replycomments('<%# Eval("projectid")%>')">Reply comments</a>
</ItemTemplate>
</asp:TemplateField>

and

function replycomments(id)
{
window.open("replymilestone.aspx?id="+id,"mypage","width=400,height=500,scrollbars=0,menu=0","");
}

View 1 Replies

Forms Data Controls :: Passing Container.dataitem As Method Parameter?

Apr 26, 2010

input type=..... value="<%= ISO3166CountryList.GetCountryByCode("IE", CurrentLocale).Name %>" />

I'm looking to replace the hardcoded IE with something like

<%#(Container.DataItem as PhoneNumber).ISO%>

No variations of what I've tried worked. How can I get a databinded value when within a <%= code block? Do I need to use an intermediary variable?

View 2 Replies

Forms Data Controls :: Passing Dynamic Value To Detail View Of Grid Through Object Selecting Parameter

Oct 4, 2010

Passing dynamic value to Detail view of grid through object selecting parameter

View 4 Replies

DataSource Controls :: Variable Connection String Parameter In A DataSource Control

May 20, 2010

I have several web forms which use a GridView linked to a DataSource control which is defined at design time as follows:

<cc1:pgsqldatasource
id="dsStates"
runat="server"
connectionstring="<%&#36; ConnectionStrings:PgSqlConnection %>"
oldvaluesparameterformatstring="Original_{0}"
providername="<%&#36; ConnectionStrings:PgSqlConnection.ProviderName %>" >
</cc1:pgsqldatasource>

As you can see, the connectionstring parameter is defined to a specific connection string name and I need to be able to set such a parameter to a different value, for example, to a session variable content.

View 1 Replies

DataSource Controls :: Access Property Of Object As Session Variable As Declarative Datasource Parameter Value

Oct 27, 2010

I am storing a custom "Organisation" object as a session variable. One of the properties of the Organisation object is "OrganisationID" (integer). I have a DataSource that requires a parameter value to run, and I want to use a SessionParameter to populate this. In a previous version, I stored the OrganisationID directly as a session variable. In that case, I could easily access it like this:

[Code]....

However, how do I now access the OrganisationID property of an "Organisation" type session variable (called "Organisation")? I have tried this, which does not seem to work: <asp:SessionParameter Name="OrganisationID" SessionField="Organisation.OrganisationID" Type="Int32" />

View 2 Replies

Datasource With Parameter In ASPX Page To Move In User Control

Sep 2, 2010

I have a page with some datasources in it. I am doing reenginering of the page itself and would like to split some parts of the page in several user controls.

In my code I have an ObjectDataSource object with the following params

[code]....

This piece of code automatically bind the hidden field "txtAlbumId" to the datasource. In my revision this datasource should be moved to a user control.

View 2 Replies

MVC :: Passing Id In Parameter?

Aug 26, 2010

I am using url in my mvc application like /product/edit/5, should change it because users can

change id parameter and access different product as this Id directly refer to Id in product table, I have validation there for user to access product.

should I continue with it or should I change it as application has many users

View 2 Replies

Passing A Parameter To Stored Procedure In C#?

Mar 23, 2011

When I try the following:

[Code]....

I get an error saying No overload for Add method takes 2 arguments. HOw would i pass the PaycheckID in then as a paramter?

View 2 Replies

Passing A Parameter To Action Method?

Sep 8, 2010

public ActionResult RenderMyThing(IList<String> strings)
{
return View("RenderMyView");
}

How do I pass in strings?

routes.MapRoute("MyRoute", "RenderMyThing.aspx", new { controller = "My", action = "RenderMyThing" });

Is there a way I could pass in strings here?

Secondly, how does ASP.NET MVC know that action is my action, and controller is my controller. Like I saw this in samples, and it does work, but isn't it just an anonymous object with no type?

View 1 Replies

SQL Server :: Passing One Input Parameter To The SP?

Sep 7, 2010

im passing one input parameter to the SP, based on that parameter i have written the code like below create procedure SP1(@inpName varchar(10))

declare @where varchar(20);
if @inpName = 'ABCD'
@where = 'A';
else if @inpName = '1234'
@where = '1';
else if @inpName = 'AB12'
@where = 'A,B';

SELECT * FROM TABLE1 WHERE COLUMN1 IN(@where);

Now the above query was fine if its 'ABCD' or '1234', but if its 'AB12' then query failed.
How to resolve this issue.?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved