DataSource Controls :: Returning A New Line In SQL?
Jul 6, 2010
I have the following SQL Statement:
SELECT ('Ref:' + ' ' + PT.REF + CHAR(13) + 'Details:' + ' ' + PT.PAYEETRANSTYPE) AS TRANSREC, PT.REF, PT.PAYEETRANSTYPE,PT.PAYEEACCNUM, PT.PAYEETRANDETAILS,PT.STATUS FROM PAYEETRANSACTION PT
The TRANSREC column as shown above has 2 details: Ref and transtype. I would like to separate them into 2 lines as followed:
Ref:
Details:
Currently, it is shown as " Ref: .... Details: .... "
I have tried using CHAR(10) and CHAR(13) , but cannot.
View 6 Replies
Similar Messages:
Feb 2, 2010
My stored procedure is returning zero....can anybody correct me....Stored Procedure -
[Code]....
Fucntion calling SP -
[Code]....
tell me where i went worng and correct procedure too....table hase 4 rows....so count should return 4..
View 8 Replies
May 15, 2010
I call this stored procedure with a dataset. It always returns a 0 but should return a 1 or 2. Does anybody know why it isn't returning a 1 or 2.
ALTER PROCEDURE dbo.sp_InsertLinkVote
@LinkId int,
@LinkVoter nvarchar(50),
@LinkVotesDateTime datetime,
@LinkVotesGoodBad bit
AS
/* SET NOCOUNT ON */
　
If EXISTS
(SELECT
*
FROM
LinkVotes
WHERE
LinkId=@LinkId
and
LinkVoter = @LinkVoter )RETURN
1
ELSE
INSERT INTO
dbo.LinkVotes (LinkId,LinkVoter,LinkVotesDateTime,LinkVotesGoodBad)VALUES
(@LinkId,@LinkVoter,@LinkVotesDateTime,@LinkVotesGoodBad)RETURN
2
Here is were a call it in my code behind.
Dim VoteCheck
As
Integer
Dim InsertVote
As
New DataSetStoredProceduresTableAdapters.QueriesTableAdapter
VoteCheck = InsertVote.sp_InsertLinkVote(LinkId, User.Identity.Name, DateAndTime. Now,
True)
'0 is a good vote.
If VoteCheck = 0
Then
It seems to insert and not insert correctly, I just cannot get it to return the correct value.
View 4 Replies
Jun 23, 2010
I am developing a page in ASP.Net where I have the user enter a letter into a textbox. They then click a submit button and I all of the userids that start with that letter are to be displayed. So I need the SP to go through the database and match first letters with what was entered. Here is what I have as my code for the SP:
CREATE PROCEDURE dbo.exp2 @testchar Char(1)
declare @flag as char(2)
set @flag = @testchar + '%'
select userid
from ex_database
where userid like @flag
View 6 Replies
Jul 9, 2010
In my application, users fill out a form to submit a "Job Request" - once they submit the form it is stored as a new row in a table in the Sql database. Each "Job Request" that is submitted is given a "JobID" which is a number and also the primary key of the new row in the database (the number is generated by the database). Once the users hit the "submit" button, I'd like to return the value of the "JobID" (the primary key) so that the user can know what it is. How would I achieve this? In the future, I will have to expand the application so that the users would be able to edit an older "Job Request" and get a similar JobID number (so if before it was 1234, the new one would be 1234-1 or something like that), so this is not simply a matter of searching for the highest number in the primary key field in the table and returning that. I'm using Sql for my database and writing in VB.
View 1 Replies
Jun 17, 2010
[Code]....
iam using asp.net2.0 with c# with sql server 2000 when iam executing the procedure in local system it is working fine.but when iam executing in client system procedure returns null value, i have checked all connection string , and session value all are working
View 1 Replies
Apr 9, 2010
I'm lost as to where to look next. Here is a sample of what I'm doing:
[Code].... The related tableadapter insert statement was autogenerated by VS2008:
INSERT INTO [ProductCycleCountItem] ([ProductCycleCountLocationID], [ProductID], [CountOnly], [Status]) VALUES (@ProductCycleCountLocationID, @ProductID, @CountOnly, @Status);
SELECT id, ProductCycleCountLocationID, ProductID, CountOnly, Status FROM ProductCycleCountItem WHERE (id = SCOPE_IDENTITY())
With multiple users it's as if it was returning @@IDENTITY instead of SCOPE_IDENTITY(). The table will look like this:
id Location product
1 A 5321
2 A 8273
3 B 2827
4 A 1743
The returned dataset will look like this:
id Location Product
1 A 5321
2 A 8273
3 A 1743
Is it maybe a SQL Server (2005) setting that's incorrect?
View 7 Replies
Apr 9, 2010
I'm returning one table. My understanding is that a DataSet can be made of more than one DataTable. I also understand that I can use either of these to return my one table.
Is it better to use the DataTable when I have one table to return instead of a DataSet? Is there any advantage of not using the DataSet in a situation like this? Is there a disadvantage to using the DataSet when only one table is being returned? Does this even matter?
View 6 Replies
Apr 10, 2010
How to return multiple tables to dataset. My code is
string q = "select job_title,primary_skill,description from T12_Company_AddRequirement where job_code='JB1';select count(p_status) from T12_SentDetails where job_code='JB1'and p_status='Technical 1';select count(p_status) from T12_SentDetails where job_code='JB1'and
p_status='Technical 2';select count(p_status) from T12_SentDetails where job_code='JB1'and p_status='Technical 3';select count(p_status) from T12_SentDetails where job_code='JB1'and p_status='HR'";
SqlConnection con=new SqlConnection(s);
SqlDataAdapter da = new SqlDataAdapter(q, con);
DataSet ds = new DataSet();
da.Fill(ds);
Grid_description.DataSource = ds.Tables[0];
Grid_description.DataSource = ds.Tables[1];
Grid_description.DataSource = ds.Tables[2];
Grid_description.DataSource = ds.Tables[3];
Grid_description.DataSource = ds.Tables[4];
Grid_description.DataBind();
This code is returning error.
View 9 Replies
Apr 29, 2010
In Login page, i make use of the following procedure:
ALTER PROCEDURE dbo.logincheck
View 4 Replies
Apr 6, 2010
I want return the value from an unknown field in linq.
[Code]....
so sopmething like the above, is it posible?
View 5 Replies
May 24, 2010
Im trying use a storedprocedure where depending on the status of the room if ='Vacant' And checkIn =date and the result will be put in a gridview, but i kept returning an error that says, "Conversion failed when convertng datetime from character string". Heres the code.
Caller:
[Code]....
Stored Procedure:
[Code]....
GridviewFiller:
[Code]....
View 7 Replies
Mar 17, 2010
I am having trouble with queries because they are not returning the data needed, and I am having trouble figuring out why because I only am testing with 2 records.First I want a query to return all records for one customer as follows:
[Code]....
There are two records with the customerID of 1, but it only returns one,next I try to return only one record, the AccountPrimary or customer_contacts.IsPrimary, but when I add " AND customer_contacts.IsPrimary = 'True' "at the end of my query it then returns both records, but only one IsPrimary = True and the Other = False. Is it backwards? I also tried another method and it returned 30 of the same record and I only have 2
View 4 Replies
Jun 10, 2010
I am trying to use a datasource with a dropdownlist. Eventually, my data source method to call a stored procedure and load the datatable is returns, but for now, I am just creating the datatable manually. I need each item to have two attributes, the text, whixh the user will see in the DDL, and the value that the program will retrieve from and store back to the file.
It is partly working in that the DDL has 3 items, however the text for each item reads "System.Data.DataRowView"
I have to be close, but I can't figure out what I am doing wrong.
[Code]....
View 8 Replies
Jan 26, 2010
I have problem with a stored procedure and function that return the same shape, but as they are different methods LINQ won' t let me cast between the two. Please see code for the two SPROCs below (This is actually simplified to represent the problem, so please don't spend lots of time explaining alternative ways of writing the function/sproc.)
Table Valued Function
"getCategories()"
SELECT categoryName, categoryID FROM categories
SPROC "getUnusedCategories"
SELECT categoryName, categoryID FROM CategoryInstances cI
FROM dbo.SMAN_getCategories(@SiteMANID, @SectionID) c
LEFT JOIN @EntityResultsTable er
View 2 Replies
Feb 7, 2010
I am having problems returning a string value through a stored procedure/linq to a label. Everything works fine if I return an integer value but I cant get a string value to bind to a label. I get the error message
Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value,
NumberFormatInfo NumberFormat) +201
Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value) +66
[InvalidCastException: String "System.Data.Linq.SqlClient.SqlPr" to 'Integer' is invalid‚]
This is the stored procedure
ALTER PROCEDURE test
AS
Select ProductName
From Products
This is the vb page
Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim db As New DataClassesDataContext
Dim product As Integer = db.test.ToString
Label1.Text = product
End Sub
This is the aspx page
<form id="form1" runat="server">
<asp:Label ID="Label1" runat="server" Text=""></asp:Label>
</form>
View 1 Replies
May 18, 2010
Here is the query I have now which returns over 2 million records:
[Code]....
This works, but the result is littered with many rows that contain the same SSN. So how do I return only one row for each ssn? I cant use distinct because all of the other columns are already always different, this would return the same as above.
View 11 Replies
Jan 14, 2010
- When I execute my query within Enterprise Manager giving the "Country" parameter a value of US, it returns the expected records
- When I assigned that value either programmatically or within the SelectParameters of my SqlDataSource, no rows are returned at all...
I have this as a parameter in the sproc:
@Country char(2) = NULL
and the relevant WHERE clause entry is:
AND (@Country IS NULL OR a.CountryCode = @Country)
My SelectParameter is:
asp:Parameter Name="Country" />
I've tried adding the "DefaultValue" property set to "US" and also tried setting it as sds.SelectParameters[4].DefaultValue="US"
When I do either of these things I get no records returned...
View 2 Replies
Jun 21, 2010
I can return single integer values when using stored procedures with Linq but I cant get single string values returned.
View 2 Replies
Jul 12, 2010
I have a Procedure which should return only 1 Record on selecting record according to Priority.
BEGIN
DECLARE @Accounts nvarchar(MAX)
SELECT @Accounts = ISNULL([map_user_modules].[Accounts], '') FROM [map_user_modules]
WHERE [map_user_modules].[id_user] = 231 AND [map_user_modules].[id_module] = 5
IF ((@Accounts = '') OR (@Accounts = 'All'))
SELECT @Accounts = null
BEGIN
Select @@ROWCOUNT as Priority2
END
IF @@ROWCOUNT = 1
BEGIN
Return
END
BEGIN
Select @@ROWCOUNT as Priority3
END
IF @@ROWCOUNT = 1
BEGIN
Return
END
BEGIN
Select @@ROWCOUNT as Priority4
END
IF @@ROWCOUNT = 1
BEGIN
Return
END
In the above statement Suppose we take a scenario where Select @@ROWCOUNT as Priority3 is executed, I get two tables returned, One is the Table returned by Select @@ROWCOUNT as Priority3 and the other is the Table returned by Select @@ROWCOUNT as Priority2 which has no Records. How can I eliminate the Empty table that returns no records.
View 1 Replies
Jul 1, 2010
I am using
SqlHelper.ExecuteDataset(MyConnectionString, CommandType.StoredProcedure, "GetInformation", new SqlParameter("@ID", ID));
In my stored Procedure, I am doing a lot of calculation with joins and it took 19 sec to execute at my sql Server 2008. My application had been working perfectly for 5 days but now as database increases, I found a problem that my connection is breaking at that point. At Sql Server, it execute fine but when I add a breakpoint and watch the stored procedure is returning null.
View 2 Replies
May 11, 2010
How to start at a specific record and returning only the next 5 records with T-SQL command
[Code]....
That is my concatenated SQL statement but it obviously does not work because it only looks at the top 5 records in the entire table instead of what I intended which would be to look at the top 5 records starting with the record where PostNumber equals the value of lastPost. I have been searching for a T-SQL statement that will allow me to do this but I can't find one.
View 2 Replies
Jan 29, 2010
My insert is adding a record to the database in the call to the stored procedure in SQL Server, but a -1 is returned - Shouldn't it return 0 if the insert/update was successful?
Result = myCommand.ExecuteNonQuery();
View 3 Replies
Jan 12, 2011
I have a formview with both edititem template and item template as following:
<asp:FormView ID="PFTFormView" runat="server"
DataKeyNames="PFTId"
EnableModelValidation="True" Width="90%"
OnItemUpdating="PFTFormView_ItemUpdating"
onmodechanging="PFTFormView_ModeChanging" >
<EditItemTemplate>
<table>
<tr><td class="style1">PFTId</td><td class="style3"><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td class="style1">Last Name</td><td><asp:TextBox ID="txtPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' Width="200px" /></td></tr>
<tr><td class="style1">First Name</td><td><asp:TextBox ID="txtPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' Width="200px" /></td></tr>
<tr><td class="style1">Home</td><td><asp:TextBox ID="txtPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' Width="200px" /></td></tr>
</table><br />
<asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True"
CommandName="Update" Text="Update" />
<asp:LinkButton ID="UpdateCancelButton" runat="server"
CausesValidation="False" CommandName="Cancel" Text="Cancel" />
</EditItemTemplate>
<ItemTemplate>
<table>
<tr><td>PFTId</td><td><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td>Last Name</td><td> <asp:Label ID="lblPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' /></td></tr>
<tr><td>First Name</td><td><asp:Label ID="lblPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' /></td></tr>
<tr><td>Home</td><td> <asp:Label ID="lblPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' /></td></tr>
</table><br />
<asp:LinkButton ID="EditButton" runat="server" CausesValidation="False"
CommandName="Edit" Text="Edit" />
</ItemTemplate>
</asp:FormView>
on my code behind, I have:
Sub PFTFormView_ItemUpdating(ByVal sender As Object, ByVal e As FormViewUpdateEventArgs)
Dim PFTObj As New PFT
Dim PFTDST As New Data.DataSet
Dim newPFTLastName As String = DirectCast(PFTFormView.FindControl("txtPFTLastName"), TextBox).Text
Dim newPFTFirstName As String = DirectCast(PFTFormView.FindControl("txtPFTFirstName"), TextBox).Text
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
If PFTObj.UpdatePFT(Session("PFTId")) Then
Me.lblErrorMessage.Text = "PFT Update Successfully"
Else
'
Me.lblErrorMessage.Text = "PFT Update UnSuccessfully"
End If
PFTDST = Nothing
PFTObj = Nothing
end sub
The problem is:
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
are not returning the updated value from the form.
View 4 Replies
Apr 14, 2010
I'm looking for a way of being able to declare and execute a SqlCommand all on one line. At the moment I do something like:
Dim Cmd as New SqlCommand("....", Conn)
Cmd.ExecuteNonQuery
How can I do something like:
(New SqlCommand("....", Conn)).ExecuteNonQuery
View 3 Replies
