how do you retrieve a particular record in a table plus x number of records that comes after it, assuming it is ordered in a particular way?I want to retrieve 3 records, and I want record where Row_A = 2 to be the first record, and the next 2 more records that follows it, assuming it is ordered by Row_A.
View 2 RepliesI want to retrieve particular no of records from table with Condition..
my table structure is
QID Question Status
1 ssssss True
2 ssssss True
3 ssssss False
4 ssssss False
5 ssssss False
here i want to 3 questions condition is Status Filed TRUE Questions are must be getting..
any one know why are the following two give me different result? they should both give me no results as the value I give is not available. however, number 1 give me many results, and number 2 works as expected. I'd like the number 1 working as the same as number 2.
1. DECLARE
@SearchMCat nvarchar,
@SearchTitle nvarchar,
@SearchDesc nvarchar
SET @SearchMCat = 'fjiewo;jafoia'
SET @SearchTitle = 'fryere'
SET @SearchDesc = 'fdsfdsafae33'
SELECT ArticleCategory.CategoryDisplayName, Article.AudioPlaybackTargetTabID, Article.VideoPlaybackTargetTabID, Article.StartTime, Article.DateAdded, Article.Body, Article.Synopsis, Article.Title, Article.ArticleHasAudio, Article.ArticleHasVideo, Article.createdBy,
Article.RatingTotal, Article.RatingCount, Article.ArticleID, ArticleCategory.CategoryName
FROM ArticleCategory RIGHT OUTER JOIN Article ON ArticleCategory.ArticleCategoryID = Article.MasterCategory
WHERE (ArticleCategory.CategoryName LIKE '%' + @SearchMCat + '%') or (Article.Title LIKE '%' + @SearchTitle + '%') or (Article.Body LIKE '%' + @SearchDesc + '%')
2.
SELECT ArticleCategory.CategoryDisplayName, Article.AudioPlaybackTargetTabID, Article.VideoPlaybackTargetTabID, Article.StartTime, Article.DateAdded, Article.Body, Article.Synopsis, Article.Title, Article.ArticleHasAudio, Article.ArticleHasVideo, Article.createdBy, Article.RatingTotal, Article.RatingCount, Article.ArticleID, ArticleCategory.CategoryName
FROM ArticleCategory RIGHT OUTER JOIN Article ON ArticleCategory.ArticleCategoryID = Article.MasterCategory
WHERE (ArticleCategory.CategoryName LIKE '%' + 'fdsafdsafdsa' + '%') or (Article.Title LIKE '%' + 'fffaery' + '%') or (Article.Body LIKE '%' + 'fdas3r43ffdsa' + '%')
I am working on a project where i need to retrieve the mobile phone's PIN number.
Actually, the aim of this is.. sales man visits the mobile stores and fills the details through the mobile phone. After submitting the details from the mobile, we will get a mail regarding that. What we have to do is, apart from the details the sales person send, we need to know the sales person location and the mobile PIN numnber.(The mobile phone we are using is BlackBerry)
I have table called "Logs". It has username, sitename, actiondate and lastupdate columns.
From this, I hve created tempLogs (Temp table) using condition where lastupdate >= somedate.
Once I get records in my temp table, I then want to retreive all the records again from "logs" table corresponding to same
username, sitename?
How would I do that.
BTW: Join will not work.
I have a label control in my from. from database i need the values to the label
View 1 Repliescould some one help me how can i get max number of a column in sqlserver2005.
actually in my column records are,
1,2,3A,3B,3C LIKE this format.
so how can i get max numer i.e 4 here.
How can I get the serial number when you add a new row in the table Add time in order to add the number in the second table
I mean I want in same the sqlcommand to insert and get the value of ( serial )..
using MS sql management studio, how can I edit one existing trigger?
when I right click it 'modify' option is disabled?
How about the way to retrieve the contents of the trigger from the DB?
When I attempt to store the current time of 'DateTime.Now' in a column defined as time in a table within an SQL database, I get an error message that says: Cannot implicitly convert type 'System.DateTime' to 'System.Timespan'.
I have no trouble storing the current date of 'DateTime.Today' in a column defined as date, but this column will not also store time along with the date. The date column has properties that indicate it has a data and system type of date with a Length of 3 and a Numeric Precision of 10. The time column has properties that indicate it has a data and system type of time with a Length of 5, a Numeric Precision of 16 and a scale of 7. Did I define the time column incorrectly for storing the time of day?
How can I retrieve information from delete rows. I delete some rows from table in dataset, then I use method GetChanges(DataRowState.Deleted) to get deleted rows. I try delete rows in original table on server side, but it finished with this errors. I try get value of columns from row, which was deleted
[Code]....
[Code]....
now i want to store my image from frontend using stored procedure
how can i achieve this and the later part would be displaying image in gridview but first i need to store
I want to retreive some data from an SqlDataSource using it's Selected event I've tried
DataView dv = (DataView)SqlDataSource1.Select(DataSourceSelectArguments.Empty)
but here it's going into in infinite loop and then it gives me an StackOverflowException error in ASP.Net Development Server (my dev machine) and if I publish to IIS it requires me an user name and password to connect to server and gives an InternetExplorer error "Sys.WebForms.PageRequestManagerServerErrorException. An unknown error ... status code returned was 400. The SqlDataSource is in an UpdatePanel. Maybe this is why I get this.
I have been searching on here for many hours and read many posts but for some reason I am being slow and cannot figure this out. I am writing a record and need to get the identity field back. I have tried many combinations based on what I have read but the below code is where I am sitting at now. it has appdatasource.ExecuteScalar() underlined and the error says 'ExecuteScalar' is not a member of 'System.Web.UI.WebControls.SQLDataSource'. I would be very grateful if someone could point out what I am missing to get this to work.
Protected Sub SubmitApp_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitApp.Click
Dim appdatasource As New SqlDataSource
appdatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString1").ToString
appdatasource.InsertCommandType = SqlDataSourceCommandType.Text
appdatasource.InsertCommand = "INSERT INTO APPLICATION (FirstName,MiddleName,LastName,AcceptTerms,IPv4Address,DateInserted) VALUES (@FirstName,@MiddleName,@LastName,@IPv4Address,@DateInserted);select @@SCOPE_IDENTITY"
appdatasource.InsertParameters.Add("FirstName", fname.Text)
appdatasource.InsertParameters.Add("MiddleName", minit.Text)
appdatasource.InsertParameters.Add("LastName", lname.Text)
appdatasource.InsertParameters.Add("DateInserted", DateTime.Now())
appdatasource.InsertParameters.Add("IPv4Address", Request.UserHostAddress.ToString)
Dim appid As Integer = appdatasource.ExecuteScalar()
End Sub
I have an app that connects to only one db for all of the data that the app has access to. My connection string is in the Web.Config file. In each of my DAL classes I have the following code that gets the connection string from the Config file. This works with no issues but I thought there might be a better way of doing this that I don't know.
If I wanted to change the name of the connection string that any of the DAL classes would use then I would have to change the name of the connection string in each of the files. I thought about creating a new class that would hold this then I could just instantiate a new instance of the class to access this with each of the DAL classes that needs access to it. Then if I needed to change the name of the connection string then it would only be in one place. I suspect there is an even better way of doing this that i don't know about.
[Code]....
I am fairly new to sql.I have two tables in a campground reservation system.
The SiteTable has two columns: SiteId and SiteType (SiteTypes are Rustic, Hydro, Group, etc.) The ReservationTable has 4 columns: RerservationId, SiteId, CustomerId, DateUsed.
I want to retrieve all Reservations from ReservationTable where SiteType = Rustic.What function do I use to take the SiteId of the ReservationTable and Lookup what SiteType it is in the SiteTable?
i dont why its happening.Below is my table
Create table workorder
(
WoID nvarchar(10),
[code]...
retrieve data from sql server without using details or grid view.
i have a table in the SQL server called NewsTable which inculde the following fields: "titlename","bywho","datetime"."news"
anyway i need to retrieve the data from this table to my web page to appear this way ==> i am using C# by the way
TitleName
posted by bywho on datetime
News
Would like enquire how to retrieve images from database.I have a table call "Image" with 3 attributes.. ImageID, AlbumID and ImagePath.I want to retrieve the photo and display out at my index page inside a gridview which will display the photos that recent users uploaded.My friend suggested the Eval way, but i have no idea how to do it.
View 3 RepliesI need to know how to extract the result of the attempted LINQ query below and set it equal to the strFile variable.Everything Intellisensed OK here but ine 5 shows a syntax error at the parenthesis.
[Code]....
I had a repeater that will be binded using dataset
[Code]....
and on page load I write this code
[Code]....
it worked very well on my machine , after applying it on the server it give the following error
Server Error in '/' Application.
Number must be either non-negative or -1. Parameter name: millisecondsTimeout Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentOutOfRangeException: Number must be either non-negative or -1. Parameter name: millisecondsTimeoutSource Error:
[Code]....
Stack Trace:
[Code]....
i have a column seq_no in datatable. if the column with data 2,4,5 how can i have the max number of the column. C#
View 5 RepliesI have seen a lot of posts online about converting the date, or day of week to a number (1-7) representing what day of the week it is.Unfortunately, I have a database that I'm trying to import that is using that number, and I need to convert it to the Day of the week Name. Is there an easy way to do this?
View 4 Repliesneed a Stored Procedure with a where with 23 where items.But if a item is 0 then i should skip that selection.So i need something like the code below, but sadly that doesnt work... And 23x23=529 selections isn't a option for me.
[Code]....
select * from tblMatchData
If I m using Windows Auth in my connectionstring i.e Integrated Security = SSPI / Trusted_Connection = Yes,
Is there any way to retrieve the USERID that is being used to make connection?