I have a column that i am wondering if there are some special rules enforced onit.. as soon as i send in a variable as an answer for the parameter in a stored procedure then my stored proc starts to filter an extra field....how can this be happening if the only difference is that i am passing in a parameter...(I am not even using this parameter!).
View 9 Replies
i have another question about Gridview,i want to have special value in of columns in my gridview, what should i use,
GridView1_RowDataBound or
GridView1_DataBound?
and how could i determine the coulmn?
I want to insert the symbol α (alpha) to the database.
i am using the field type as nvarchar
when i directly copy-paste it to database it works
when i try it over sql it is entering as 'a'
I have a table that contain special characters and when the user search for nguyen I want to return string that contain Nguyễn or nguyen or any other nguyen variations.
I have absolutely no idea where to start and will be greateful if someone know any article that explain how I can do this.
how do I go about inserting into a database special characters such as the uppercase O, umlaut Ö Please understand that I have been able to insert the special character from inside MMS by putting an N in front of the value but when I run the SQL file from inside an ASP.net 4.0 page it comes up as a diamond with a question mark in it
View 12 Repliesi Am using Special character while insert in the database. When i user single Quotes('), it shows an error that "Unclosed quotation mark after the character string" How can i over come this issue. But i want to insert the special characters"
View 5 RepliesI have a Gridview like this;
In my .cs file i calculate value of BV, MV, KV total value with this code and i assign to a Label. Labels are under the Gridview. BUT, some customer names long some of short, because of that, labels location changing according to Gridview. Because of that i don't want use Label.
I calculate a value with this code, and how can i assing BV, MV and KV columns footer this value?
double sumRISK = 0;
foreach (GridViewRow gvr in GridView1.Rows)
{
CheckBox cb = (CheckBox)gvr.FindControl("NameCheckBoxField1");
if (cb.Checked == true)
{
double amountBV = Convert.ToDouble(gvr.Cells[7].Text);
if (amountBV != -1)
{
sumRISK += amountBV;
}
}
}
RISK_Label.Text = String.Format("{0:n}", sumRISK);
I want to select the list of messagetext from the messages table where the message text contains any of the Carriage Return Characters?? (Eg: /r/n) what are the other Carriage Returns characters and how can i filter those from the message text?
View 8 Repliesi have table a with fourcolumns and more which need not be considered i would like the fourth column which has a special charcater ^ within it to act as row seperator such tht the values of 1,2,3 are comon for ALL THE ROWS BASED ON THE SPECIAL CHARACTER.
View 3 RepliesI'm currectly tryin to access a specific value in my database in a specific column. I'm tryin to use the primary key of the table to access the actual value in the row of that ID.
The current code:
[Code]....
Just iterates through the table and looking for any row with the boolean 'checkin' value is True, then it takes the 'id' value of that row and stores it into an array. Is there a way that I can access a another entry, and only that entry, in the table with the 'id' stored in the array?
Like if my data base contained and int, primarykey, `id` value, a boolean, `checkedin` value, and a `time` value, is there a way to access, lets say, the row with `id` equalling 3 and and the checkIn value from that row?
I'm trying to retreive a column value from gridview5 to use it in a query to display resuls in gridview, Also how do you hide a column in the grid?
Where (p.Link_ID Like GridView5.?
[code]....
i have a datatable with several columns and rows. now i want to copy the last column fully (all rows) and create the new column with that values.
it means last column values sholud be moved to new column (now this is the last column).
I am having problems with the following update query that is part of an SQL Datasource. This query was automatically generated by VS2008 and I have formatted it so that it is easier to read.
UPDATE tblowner
SET altownerid = @AltOwnerID,
name = @Name,
address = @Address,
phyadd = @PhyAdd,
phone = @Phone,
fax = @Fax,
cellphone = @CellPhone,
email = @Email,
COMMENT = @Comment,
attention = @Attention,
contact = @Contact,
ownerdesc = @OwnerDesc,
taxid = @TaxID,
financialcontact = @FinancialContact,
fyenddate = @FYEndDate,
firstname = @FirstName,
lastname = @LastName,
stampinit = @StampInit,
stampdate = @StampDate,
zipid = @ZIPID,
[ZIP+4] = @N'@[ZIP+4]'
WHERE ( ownerid = @original_OwnerID )
Everything works but the [ZIP+4] field which does not update. I believe that VS2008 added the square brackets around the field name because of the plus character that it contains. If I change the ZIP+4 variable name to [ZIP+4] = @ZIP4 it still does not work. This brings up another question, I have never understood where these update queries are getting their data from.
Scenario:
I am creating a custom gridview control which has a custom CheckBoxTemplateField column (deriving from TemplateField class). This template field column has custom Checkboxheadertemplate (implementing ITemplate) and CheckboxItemTemplate (also implementing ITemplate). In InstantiateIn method of both templates (header as well as Item template), I am adding a checkbox control which has Autopostback = true.
My requirement is:
I want to mark all the values in the binding column of datasource if checkbox in headertemplate is checked. I dont want to mark only rows visible on grid. I WANT TO MARK ALL ROWS IN DATASOURCE. I want to do this in _CheckedChanged event of checkbox in header template.
Problem I am facing: When I check/uncheck the checkbox in header, it postbacks. so in OnCheckedChanged event, gridview's datasource is null. Secondly, in any event of gridview, I could access only those rows of datasource for which corresponding rows are visible in gridview through Gridviewrow.DataItem property. But I want to set it for all rows in datasource.
I create a table as picture below :
when I insert any character to column Name then A new string random will auto insert into column Random (picture below) I had used Trigger but It was error !
I want to column Random use to code :
DECLARE @myid uniqueidentifier
SET @myid = NEWID()
insert into table_1 values(@myid, substring(CONVERT(varchar(255), @myid), 1, 5))
but It must auto like column Number (column Number is Identity)
I have search application and in my search application there are some premium clients and other free clients.Now whenever any user search at that time i wants to fetch 70% data free and 30% data of premium client and also i wants to search data in the manner of on each page 3 premium client and rest of free users and if click on next page then once again 3 premium client and rest free clients.
View 1 RepliesI have a table named dups. There are 4 columns in the table.
id, name, path, hash
I want to return only the name, path, hash of each row where the hash field is the same. Example there are 100 rows but only two qualify the return would be.
file1 c: 10909
file4 d: 10909
For some reason this seems to be a more difficult task than I though it would be.
could some one help me how can i get max number of a column in sqlserver2005.
actually in my column records are,
1,2,3A,3B,3C LIKE this format.
so how can i get max numer i.e 4 here.
I have a simple list of data in my database that I call to my page. I have used the asp.net 'reorder list' ajax control to provide a drag and drop way of managing the sort order of my data. It uses a 'position' column in the database to do this.
How do I go about making sure that when inserting data to this table, the new item gets assigned the correct 'position' value? For example if I have 9 items already in my table, I want this newly inserted list item to get assigned a value of 10 in the position column.
i have a button and in click event i want to take the SUM() of a one cloumn and assign it into a integer and if that integer is > 20 display "pass" or something
i've tried many ways but non worked.
I was woundering if its possible for me to check for accesslevel value from the database using objectdatasouce.... From my coldfusion experience... i could just use an "if statement"
e.g: <cfif> (datasouce.column = x) then
<cfoutput> msg</cfoutput>
</cfif>
Am not so sure about .net.... All i am trying to do is to check for one value on the db and i dont mind puting it on code behind... i just need a way..
I know there is a way to get all the column name from a table, but that is not what I want
I want to get only a few column name from the table, is there a way to do this?
Let say, table A has three columns that is A1, A2 and A3, I only want A1 and A2 column names, again, can this be done?
BY the way, I am using SQL Server 2005 with asp.net application.
How to search through a Database column C# and display only what you want like a number 2 in a Gridview ..
View 12 RepliesExample:-
column values:- Microsoft Java
I like to update above record using below SQL, so that new values are appended to old values instead of removing old values.
[Code]....
Output:- Microsoft Java some text
Customers of hours buy packs of hours, these are credited and debited on their account. We have a prepayhours table and that has various columns in it, one credit and one debit. I have written a query using the Query building and SQLDS to total these columns, which is fine. What i really want to do is get that query, or if there is an easier way to add up all the debits and subtract them from the total of credits so you would end up with a + or - totalThen with that i can put it into a label or if there was a way to add a row at the end of my gridview which just said total in one column and the total of the hours in the next.
I have some SQL code which seems to work in SQL 2008 but not in the SQL designer for VWD.
CREATE VIEW dbo.prepayhrstotals
AS
SELECT COUNT(Debit) AS cntDebit, COUNT(Credit) AS cntCredit
FROM prepayhrs
GO
SELECT (cntdebit - cntcredit) AS totalhours
FROM prepayhrstotals
