DataSource Controls :: Sql Server Deadlock / Only Inserting/updating Data Into A Table
Jun 11, 2010
I m getting following error in my eventvwr . I couldnt find reasons of the following error.
"Transaction (Process ID 110) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction. "
The only thing my page is doing is inserting/updating data into a table in sql and the thing I can think of is because multiple users are using the same page to insert/update data? Will that cause deadlock?
View 4 Replies
Similar Messages:
Oct 15, 2010
The topic of sql server deadlock has been discussed many times, however, I was unsure that even two simultaneous inserts on a table can end up in a deadlock situation. Scenario: While testing our application (SQL Server 2005 as backend, ASP.net 3.5) we inserted records into a table simultaneously (simplified overview) and that resulted into a deadlock for more than 70% of users.
I could not get a hang of this as how an insert is being deadlock as this is not a case of multiple resources. After a detailed analysis (of reproducing the bug by two users) I found that both the processes were holding a RangeS-S lock on the primary key index of the table and were trying to convert this into RangeI-N lock, that resulted into a deadlock and one transaction being killed.
Question: Can we avoid or reduce these kind of deadlocks as this is not a case of change in order of access of resources? Cant' we force the transaction to get exclusive lock initially so that it blocks the other process and avoid deadlock? What (adverse) effects that may have? Also could some one explain more about RangeI-N lock.
Isolation Level for this was "Serializable".
View 2 Replies
Jan 12, 2010
a script which creates a deadlock in a Sql Server 2008 database?I want to do a trace in a customer environment using a trace flag but first I want to test it in my own environment.
View 4 Replies
Jan 19, 2010
I am building an app (ASP.NET 3.5 + SQL 2005) that allow users to schedule meetings and these meeting will show in the users to-do list.
One kind of meeting, when scheduled, should show into ALL users to-do list.
I have 3 tables:
#1 - Users -> UserID
#2 - Meetings -> MeetingID
#3 - Member_Meeting -> UserID+MeetingID
What I need is:
Based on the scheduled meeting, read all users from table #1 and add their info in the table # 3 with the MeetingID (which I can get from the UI, because it will happen when they create the meeting).
I have been browsing about it, but so far, I couldn't find a good source of info to start with.
View 5 Replies
Jan 26, 2010
I have two tables cust and order_cust cust table have cust_id, name, addr, zip columns and order_cust have order_id and cust_id columns I take input from user for cust table i.e. name, addr, zip... the cust_id is an IDENTITY column so generates the value automatically Now I want to insert the last generated cust_id into order_cust (order_id is also an IDENTITY column)
How can I achieve that using stored procedure?
View 5 Replies
Jan 18, 2010
I would like to know how deadlock is happen, i have facing alot of sql deadlock in my event handle on server computer.
View 3 Replies
Apr 23, 2010
I am having trouble inserting data into the table using dataset..following is my code:
[Code]....
The m_id is a primary key..I want to auto-increament it everytime a data is inserted into the table so I have configured (isIdentity) to Yes and Identity increament to "YES"..I don't know if its right or not..I already added some data manually into the table but now I want to add more data using the above code..but its not working..
[code]....
View 10 Replies
Apr 1, 2010
Im Inserting data into database table with the help of datasets but its not inserting to table and even its not showing errors.
this is my code....
[code]....
View 3 Replies
Jul 13, 2010
I am doing a management system . What i am trying to accomplish is that when a user fill form relevant to management system the data should go into respective tables.How to accomplish this.I am using primary keys and foreign keys
View 3 Replies
Jan 29, 2010
My insert is adding a record to the database in the call to the stored procedure in SQL Server, but a -1 is returned - Shouldn't it return 0 if the insert/update was successful?
Result = myCommand.ExecuteNonQuery();
View 3 Replies
Apr 28, 2010
I have requirement that User can Upload the Excel Sheet Data to sql server Database at once.
View 16 Replies
Apr 17, 2010
Data entered in textboxes is not getting updated in database. In debug mode I see that textbox1 and textbox2 in ItemUpdating event contain the same values as they had before calling ItemUpdating.
Here's my listview control:
[Code]....
What's wrong with updating of text1.Text, text2.Text in ItemUpdating event? Should I use e.NewValues property? If so, how to use it?
View 1 Replies
Oct 22, 2010
If I create a data tabe in C# like so:
datatable t = new DataTable;
DataColum C1 = new DataColum;//ID column
t.Columns.Add(C1);
//the same with column C2
Then I fill up the table with some data. Then the goal is to either insert this data or update data in an SQLtable in SQL. If the data is inserted, the ID column in t would be empty, if updated, it would not be. So in the insertion case, the sql query needs to make sure that unique IDs are assigned during insertion, in the update case, it just has to look for the right IDs.How to go about this? Asking because I am only familiar with updating and inserting single lines into a table. One could loop in C# over the datatable t of course and insert or update line by line, but this would probably be slow. Is there a way to write an SQL query like this somehow:
Insert Into SQLTable Values (@t)
?
And Update like this:
Update SQLTable SET ... Where C1 = @t.C1
Or something like that.
I know that SQL server can create automatic update and insert queries and that you can then type things in C# like
Adapter.Update(t);
But, this has proven to be super slow on our server, for unknown reasons. I have asked on this forum and got some answers from experts, but was not able to srot out the problem. How can we write a custom SQL query that allow updating and inserting a whole table, instead of just one line at a time?
View 3 Replies
Feb 1, 2010
I have two databound controls on one page. GridView, DropDownList. My page is crashing with a SQL Transaction deadlock victim error. I would like to capture this error, and attempt to re-databind the controls. My first thought was to handle an event on the controls that allow me to do this, but I don't see which event to handle. I couldn't search any answers. Where should I begin?
View 3 Replies
Jan 20, 2010
I have stepped through this code to test it and I am puzzled as to why the update isn't going through to the DB. When I run the SQL statement in SQL editor it updates fine. All variables are getting the proper values when I step through.
[Code]....
View 5 Replies
Jul 2, 2010
I'm using this code to generate my table:
[Code]....
And then im using this code after submiting:
[Code]....
But the ID from the Request.Form is 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26, etc.
protected void Page_Load(object sender, EventArgs e)
View 6 Replies
Aug 12, 2010
Here is the scenerio:I have a radtabstrip (with 2 tabs) at the top of my page followed by radMultiPage control Tab 1 displays pageview 1 which has a gridview showing data from our database and allows for selection or deletion of data tab 2 displays a detailsview when gridview_selectedindexchanged(from tab 1) is fired.Problem... If you select an entry in the gridview it switech the page and the detailsview into editmode (works fine) but if you then click on tab 1 without clicking update or cancel in the detailsview, the data is updated. This is what i don't want as the user has basically abandoned the changes.So what i need is a what to say ... if the detailsview is in edit or insert when the tabstrip is clicked then cancel the insert or update. I tried switching it back to readonly mode but that did not seem to work.
View 2 Replies
Jun 16, 2010
I've the user creation form where a user will be created by entering username. Below that is checkboxlist for UserGroup which is binded with the dataset with the all the usergroup. Hence up on entering the username and checkbox selected(as the user can belong to multiple UserGroups).At database end, there are basically 3 tables-
Users(UserID,UserName)
UserToGroup(UserID,GroupID)
Groups(GroupID,GroupName)
So when i click create new user, the UserId along with GroupID(whichever checked) is saved into UserToGroup table.Im relative to this kind of process and hence facing setbacks. Can somebody help in end to end process. From front to DB SP.
View 6 Replies
Jun 8, 2010
I am using Stored Procedure as my Insert/Update command in a FormView. The sp returns a value which I will need to use. How do I retrieve the value after doing an insert / update?
View 4 Replies
May 14, 2010
If an insert statement is the victim of a deadlock, will an insert/update trigger still be fired?
View 3 Replies
Jul 1, 2010
I have a datatable for which i'm defining a dataadapter. I'm specifying an updatecommand with sqlparameters for the dataadapter I set the updatecommand's parameters using the following overload:
[Code]....
The length 16 is used because this is the length of the field according to sql (the image datafield is a pointer of size 16) I noticed .Net is actually truncating the string because of the length i'm setting. An image of size 3kb will properly upload if we set the length field to be greater than 3kb The question I have is what is the proper value (or strategy) to use in order to set for the length field so that ALL images will properly update to the database, with each using the appropriate size.
I guess i could theoretically set the length to be maxint, but this seems sloppy. Looking at sqlparameter documentation i didnt see an 'unlimited' or 'default' length i could set, which would allow each update statement called to use the appropriate size for the data length for that row.
View 1 Replies
Mar 7, 2012
I am Using a third party tool DevExpress ..
I need to perform Editing , Deleting , Updating and inserting in GridControl .. I am unable configure it properly ..
View 1 Replies
May 7, 2010
I was facing some serious deadlock issues in a high transaction table.For some select statement i have added nolock .But for few i can not put nolock, as i need accurate data.this select statement becomes a deadlock victim at times.
View 3 Replies
Apr 19, 2010
In general, If multiple users thru an application try to update the same tables in database simultaneously, then by default on what basis the priority will be given.Like if we don't have any extra logic for the locking implemented.
View 3 Replies
Aug 11, 2010
I am working on a web app for an online photo album. It is the last project in Scott Mitchell's book: "ASP.Net 2.0 in 24 hours".
I am creating a page where users can enter new photo images. The functionality for uploading an image will come later. I am working on just inserting a new row into the Pictures table with an optional category, a required title and a required description.
I am getting an error when I try to insert a new row.
Here is a screenshot of the page with a shot of the dropdown list.
The Categories are user-specific. I am getting the correct values retrieved.
[URL]
There are two pretty simple database tables involved here.
NOTE: The CategoryID and PIctureID are both autoincrement integer columns.
[URL]
The page uses a DetailsView that uses a SqlDataSource that uses the Pictures table. (The DetailsView's Default Mode property is set to "Insert". The "Enable Inserting" checkbox is also checked.)
The dropdown list uses a dropdown control that uses a SqlDataSource that uses the Categories table.
When the "Insert" button is clicked the CategoryID value associated with selected (Category) Name on the dropdown list will be used along with the Title and Description values to insert a row in to the Pictures table. (If no Category value is selected, then a null value will be used for the CategoryID. This is OK because the CategoryID column in the Pictures table allows nulls.)
My problem is that I am getting this error:
Cannot insert explicit value for identity column in table 'Pictures' when IDENTITY_INSERT is set to OFF.
(FYI: I have the full version of both Visual Studio and SQL Server.)
Here is my source code for the page:
[Code]....
View 3 Replies
