I get the following error from a 550 line sql statement with multiple temp tables:
"The maximum number of tables in a query (260) was exceeded."
Are there any tricks for getting rid of this error? The long query is required for this program. Will I need to build a new table before the query runs?
one of our programmers is having an issue with a asp.net app. i had him rebuild and recompile the app to the network share on the staging server and received the same error. i even deleted the files in this folder
(C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files). to make sure that the server was not the issue i installed it on another server and received the same error. i found a article on msdn that states that its a source code issue. Compiler Error Message: BC30041: Maximum number of errors has been exceeded. Source Error:
[Code]....
[No relevant source lines]
Source File: vbc : Line: 0
I have a table with recursive relation,a function and a sp for readig data from that table:
[Code...]
When I execute sp,I got this error:Maximum stored procedure,function,trigger or view nesting level exceeded (limit 32).
I'm trying to fix an issue with an application I'm supporting (I didn't write the code). The code takes an SSRS report and renders it in pdf format. Users are sporadically getting the error indicated in the title. There is no rhyme or reason to when the error is generated (a particular report will run one time and throw the error the next). The code is below.
Public Sub OpenReport()
Dim MyParms As New Generic.List(Of ReportParameter)
Dim mimeType As String = Nothing
Dim encoding As String = Nothing
Dim extension As String = Nothing
Dim deviceInfo As String = Nothing
Dim streamids() As String = Nothing
Dim warnings As Microsoft.Reporting.WebForms.Warning() = Nothing
Dim bytes() As Byte
Dim format As String = "PDF" ''#to open the report in pdf; report viewer invisible
Try
If dropReports.SelectedItem.Value = "1" Then
If Session("IsBDAP") = True Then
MyParms.Add(New ReportParameter("SCAId", dropSCA.SelectedItem.Value, False))
Else
MyParms.Add(New ReportParameter("SCAId", Server.UrlEncode(Session("SCAId")), False))
End If
MyParms.Add(New ReportParameter("ProviderId", dropProvider.SelectedItem.Value, False))
If dropVisit.Visible = True Then
MyParms.Add(New ReportParameter("VisitId", dropVisit.SelectedItem.Value, False))
End If
MyParms.Add(New ReportParameter("FY", dropContractFY.SelectedItem.Value, False))
ReportViewer1.ProcessingMode = ProcessingMode.Remote
ReportViewer1.ServerReport.ReportServerUrl = New Uri(System.Configuration.ConfigurationManager.AppSettings("ReportServerURI"))
ReportViewer1.ServerReport.ReportPath = Session("ReportsFolder") & "MReport"
ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
ReportViewer1.ServerReport.SetParameters(MyParms)
''#Code to convert the report to pdf
deviceInfo = "<DeviceInfo>" + "<SimplePageHeaders>True</SimplePageHeaders>" + "</DeviceInfo>"
bytes = ReportViewer1.ServerReport.Render(format, deviceInfo, mimeType, encoding, extension, streamids, warnings)
Dim size As Integer = bytes.Length
ReportViewer1.ServerReport.Refresh()
Response.Buffer = True
Response.Clear()
Response.ContentType = mimeType
Response.AddHeader("content-disposition", "attachment; filename=MReport." + extension)
Response.BinaryWrite(bytes)
ElseIf dropReports.SelectedItem.Value = "2" Then
If Session("IsBDAP") = True Then
MyParms.Add(New ReportParameter("SCAId", dropSCA.SelectedItem.Value, False))
Else
MyParms.Add(New ReportParameter("SCAId", Server.UrlEncode(Session("SCAId")), False))
End If
MyParms.Add(New ReportParameter("ProviderId", dropProvider.SelectedItem.Value, False))
If dropVisit.Visible = True Then
MyParms.Add(New ReportParameter("FollowUpVisitId", dropVisit.SelectedItem.Value, False))
End If
MyParms.Add(New ReportParameter("FY", dropContractFY.SelectedItem.Value, False))
ReportViewer1.ProcessingMode = ProcessingMode.Remote
ReportViewer1.ServerReport.ReportServerUrl = New Uri(System.Configuration.ConfigurationManager.AppSettings("ReportServerURI"))
ReportViewer1.ServerReport.ReportPath = Session("ReportsFolder") & "FReport"
ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
ReportViewer1.ServerReport.SetParameters(MyParms)
''#Code to convert the report to pdf
deviceInfo = "<DeviceInfo>" + "<SimplePageHeaders>True</SimplePageHeaders>" + "</DeviceInfo>"
bytes = ReportViewer1.ServerReport.Render(format, deviceInfo, mimeType, encoding, extension, streamids, warnings)
ReportViewer1.ServerReport.Refresh()
Response.Buffer = True
Response.Clear()
Response.ContentType = mimeType
Response.AddHeader("content-disposition", "attachment; filename=FReport." + extension)
Response.BinaryWrite(bytes)
I read that the default length limit is 4MB. None of the reports by themselves are even over 350K. I'm wondering if this could be caused by a caching issue. I'm not an expert, so I need some guidance as to how best to solve the problem. I also want to understand why the issue is happening. note that only 2 reports are shown in the snippet - there are about 30+ reports in the full sub. edit - I tried the proposed solution, but it didn't help (I also tried the Fiddler route, but did not see anything glaring). I thought it might be best to clarify. The reports will run fine for a while, but the execution time gradually gets slower and slower until the application eventually displays the error.
I have written an asp upload script. It works ok for small files but anything over say 4 meg and it struggles. I keep getting the following error coming up:Maximum request length exceeded. Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Web.HttpException: Maximum request length exceeded.So the above error comes up or it times out. Is there a way to modify the code so that it won't do this? I have included the code that I have written.
[Code]....
When uploading a file over 4mb I receive error: maximum request length exceeded. This is fine - I don't want users to upload files any larger. But, anyone know how to handle the error in a clean way? It appears I can't avoid it with an IF statement or Try/Catch block.
View 1 RepliesI have some problem according to nettiers generator..
i am using nettiers 2.3.0 to generate library for oracle datasource 10g.
here is the error when i am using the library..
ORA-01000: maximum open cursors exceeded
ORA-06512: at "EPROC.ADM_MENU_GETPAGED", line 40
ORA-06512: at line 1
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OracleClient.OracleException: ORA-01000: maximum open cursors exceeded
ORA-06512: at "USERXXX.ADM_MENU_GETPAGED", line 40
ORA-06512: at line 1
Source Error:
[Code]....
I have set up the maxRequestLength :-
<httpRuntime
maxRequestLength="10000"/>
Then I found this solution online to handle the error if someone tries to upload file bigger than 10 MB
[Code]....
This works great on my local machine but when I try to run it from Production server , It still shows me the "Internet Expolrer cannot display webpage". I just want to display a nice message to user when He tries to upload file larger than 10 MB.
I am getting this error when I am trying to upload a video in my site. how to fix this?
View 3 RepliesIf I upload a file that is larger than the configs max request length I get a "Server Response Error: Unknown Server Error" alert popup. It asks if I want to see the response page and if I click "OK" an application error window pops up saying "Maximum request length exceeded." I found this already. [URL] I was unsuccessful at getting that to work.
I also found another SO question (I can't seem to find it now) that was similar. The difference was that the OP had asked how to redirect to an error page. I don't want to do that. The answer was to use a custom error redirect that gets setup in the web.config.
I simply want to absorb the error and do nothing, I'm using the OnClientUploadError event to handle the error via js. Basically, I just don't want this stupid popup message.
One odd thing is that I don't see the error when running the app locally, but I do see the error when I've got the app deployed out to our server. Note I should have mentioned that I know about the config value to set the max request length. Setting it to be very large won't work for this instance. Update So, I'm wondering if this could be something with the IIS settings of our server. It's odd that it doesn't happen locally. what I should be looking for? Most of what I find on the net suggests modifying the machine.config. However, as I said before, I don't simply want to up the allowed size. I am handling the error fine via js, I don't want this alert to show up under any circumstances. Update Well, it sounds like the IIS default limit is 30MB.
I am using DotNetNuke and I have posted this in their forum. But it is more appropriate here. I am trying to upload a 13 MB video file to my site ( a .flv file) using the file manager function under the host login. I understand that .NET limits the upload size to 4 MB for security reasons. In accordance with other posts here I added this code to my web.config file to allow bigger upload.
<httpRuntime maxRequestLength="51200" enable = "True"
I added it in the system.web section. Now, I still get this error:
"An error has occurred.DotNetNuke.Services.Exceptions.PageLoadException: Maximum request length exceeded. ---> System.Web.HttpException: Maximum request length exceeded. at System.Web.HttpRequest.GetEntireRawContent() at System.Web.HttpRequest.GetMultipartContent() at System.Web.HttpRequest.FillInFormCollection() at System.Web.HttpRequest.get_Form() at System.Web.HttpRequest.get_HasForm() at System.Web.UI.Page.GetCollectionBasedOnMethod(Boolean dontReturnNull) at System.Web.UI.Page.DeterminePostBackMode() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace.
When the user tries to upload a file with a size more than 4 MB, the AsyncFileUpload control gives a Confirmation alert (with "OK"/"Cancel" button) with the following message "Server Response error: Maximum Request Lengh Exceeded". But when the User clicks the "OK" button a new window popups and shows the server error and on clicking the cancel button the AsyncFileUpload background color turns red. Here I am not sure why the control is showing a Confirmation alert instead of a simple alert message. Is it possible to change the Confirmation alert with the simple alert message? Basically I don't want the popup window to show the server error as it is happening currently. Also, is there a better way to handle the file size error and show apporiate error message to the users?
View 2 RepliesI have developed an application using Winforms that connects to the Database using WCF services. All the services are working fine except those that return huge amount of data from the database. I did increase the size of the maxReceivedMessageSize and maxBufferPoolSize to 9223372036854775807 in the Config file of the client which I believe is the largest but I still get the error message "The maximum message size quota for incoming messages (65536) has been exceeded". I am using visual studio 2010 with VB.Net programming language on the client side and C sharp on the server.
I also goggled but the nearest solution I got was to increase the maxReceivedMessageSize which I did but in vain. Below is the detail of the error: "The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.
[Code] ....
i am implementing the wcf webservice and using in my web application.
I am getting the error maximum string content length quota (8192) has been exceeded while reading XML data.
client side code :
[Code]....
WCF web.config
[Code]....
As the title sugests, I am missing a (basic?) concept as I teach myself asp.net, linq, and C#. It has been awhile since I've done anything object oriented, so I don't know how much that is impacting this gap in my understanding. Anyhow, here is what I am trying to do. I have three SQL Server tables: PERSON, POSITION, AREA. There is a 1 to many relationship between PERSON and POSITION, and a 1 to 1 relationship between POSITION and AREA. Given the following code I verify who the person is who has logged into the browser:
[Code]....
I want to be able to return all of the AREAs the person is able to access, based on the position they currently hold. I am able to easily do this in a SQL Server query, and I am sure I can do this with a SQL stored procedure once I pass the EMPLOYEE_ID to the procedure. However, I would rather do this in the page_load event, and load the returned results into gridview1 for the viewer. The issue I am running into is in building the LINQ query. When I try to build it, I can only get access to two of the three tables, depending on which table I select with db. Is it possible to access all three tables in the same query?
I am trying to create an application in which there is a summary of outstanding payments.
One table is Table_Bills.
The other table stores records of Payments made and is called Table_Payments.
In summary i want to show 3 figures - each in separate one field datagridview with a data_source in separate data_adapter:
1) Ammount_Due 2) Amount_Paid 3) Balance.
The first two are no problem but the last is giving me a headache.
I tried this:
SELECT SUM(DHB_New_Jobtable.DayWage) - SUM(DHB_Payments.Ammount) AS Expr1
can get two tables in only one query with LINQ to Entities
Code for example:
[Code]....
i have a form view that takes fields from two tables 'Contract' and 'volunteers', however because i used a query builder,i have to input an insert statement. How do i create an insert statement for two tables in one query?
View 4 RepliesI am working on a small project. I ran the query below to get the maximum userid and increase it by 1 to create a new userid. However, when I run the query, it does not display the values that I enter into the database using insert statement. For example, if I open the table called login, I can see there are three records. If Irun the select statement, it only return one record which is the one that I enter manually when I first created the table. If I run the same select statement and give it a user id that I created, it returns the correct result.
[Code]....
[Code]....
Does anyone have any ideas on this? I have 20 parameters.
I am trying to Upload data from Excel file. Transfer data from Excel file to XML file and passed it to Store procedure. And insert the record into database.I also set the timeout for command to zero. when i upload 1 to 500 rows its working fine and when I upload the 10000 rows than its takes time but upload all the users successfully at localhost. But when I upload the code to remote srever,than its only upload upto 300 or 400 rows.After uploading these users it will gives the error of Request Time Out . Even more if I tried to upload 50000 rows its give me the error of 'Maximum Length Exceeded'. Can anyone tell me what the maximum size of Excel sheet to upload the users. How I can get rid of the Request Time Out Issue. How I can Increase the server response time.
View 4 Replieswhen I upload image i had this error maximum request length exceeded.
View 2 RepliesI encounter "maximum length exceeded" error when I try to upload a document which is 9MB in size. I know that the issue will be solved if httpRuntime maxRequestLength and requestLengthDiskThreshold in web.config are increased but what I am looking for is how I can nicely handle the error and show the message to the user. I did try to use Application_Error event in global ascx but the event is not fired. The reason might be from Server.Transfer from DNN PageBase class's OnError method.
Specifications:
NET 3.5 SP1 (ASP.NET)
IIS 6
DotNetNuke 5.4.4(2)
I have an ambitious requirement for an asp.net 2.0 web page that contains a table (gridview), and each row in the grid contains 6 select (dropdown) controls for data entry. The number of rows that will be displayed is dependent upon the user's search parameters, which are specified in another area of the page. Unfortunately, with the default (and even basic) search parameters specified, the grid could contain several hundred rows. I've noticed that the browser, in this case IE8, starts behaving rather erratically once I reach a large number of rows -- no documented evidence for the number of rows where this begins to be a problem. For example, trying to view the source of the page results in a message from IE stating that there was a problem with the page that forced the browser to reload it, and I never get the source. Obviously the page loads and renders rather slowly also.
I know that my solution is probably going to involve paging the gridview such that it only displays 20 or so rows per page, and I'll have to write code to handle the saving of changes in the dropdown values when the user changes pages. I can probably turn off viewstate on the gridview also. However, the question I really want to pose is this -- has anyone seen a documented rule indicating the maximum number of input controls that an HTML browser form is supposed to be able to contain? I could not find anything on the Internet after doing a search, and I suspect the answer may be whatever the browser can handle based on the machine configuration it is running on. Any rules of thumb you use?
I have a gridview, in which i placed checkbox as Itemtemplate. My need is to restrict the user from selecting more than 'N' number of selections.
Eg: Gridview contains 50 records, that means 50 check boxes.
Max permitted selections: 10.
After the 10th checkbox selection, user should be prompted that..
"No more selections.. blah blah... "
Should i go for looping through records.. or is there any better way..
