DataSource Controls :: Dynamically Change ObjectDataSource.Filterexpression?

Apr 28, 2010

I would change the filterexpression depending to the choice of some DropDownList but, i've tryed with ObjectDataSource_Filtering event but it seems that non reevaluate the filter.is it the right event?i've to do any other operations after changing the filterexpression?

View 1 Replies


Similar Messages:

DataSource Controls :: Use Nested Query In Objectdatasource.FilterExpression?

Jan 30, 2010

I was wondering if I could use something like :

ObjectDataSource1.FilterExpression = " (ID in (Select ID from TablewithIDs where User = '{0}')) "

I am getting this error:

Syntax error: Missing operand after 'ID' operator.

View 1 Replies

C# - Enable Filtering On An Objectdatasource With Filterexpression When Bound To A List <object>?

Nov 29, 2010

how to use FilterExpression with an object datasource when it is bound using a selectmethod that returns a list of entity objects?

I get the following error when I attempt it.

The data source 'testODS' only supports filtering when the SelectMethod returns a DataSet or a DataTable

View 2 Replies

DataSource Controls :: Enabling Paging On ObjectDataSource That Is Built Dynamically In Code Behind?

Oct 28, 2010

I have the following on my aspx page

[Code]....

Then in my code behind i have the following set up in 4+ button events, since each button serves a different purpose.. Prior to this past week, i was only working with 2 gridviews on the page.. that were linked to this datasource.. so everything was fine.. but recently had to add a Datalist to display the results a certain way.. I got it all working, but now that more records are in the table the datalist is growing in length on the page and cant figure out how to modify the current code to enable paging without having to redesign the logic all together to get it enabled.

Based on what i have below and above, is there a solution i can implement to implement paging ONLY for the Datalist? Or if it cant be specific, if enabled, will it affect the gridview that is already configured to enable paging, which already works?

[Code]....

View 7 Replies

DataSource Controls :: Use FilterExpression On Three Fields While 1 Or 2 Are Blank?

Jan 20, 2011

I've been using the FilterExpression for the building of my GridView. I've built with this ability before, normally for searching for the name of an individual. However, the new project I'm working on has a small problem. I'm using an AND statement to filter the name via textbox and I'm also checking if the form was completely finished and if the form is reviewed via radio buttons.

Below is the code, but the problem is this. If any of the fields are blank (text field is left blank or the "both" is selected from the radio buttons) the form doesn't process my filter.

Is there an easy way to apply all three filters in a mix and match fashion (like no name, completed, not reviewed or any combination thereof)?

[Code]....

View 10 Replies

DataSource Controls :: SQLDatasource FilterExpression Error - Input String Was Not A Correct Format

Nov 25, 2010

I get the Erorr: Input String was NOT a correct format.

The first three controlparameters are STRINGS and they work fine.

However the last two populate the controlparameter from text boxes that can only accept numbers and decimal point.

First the text boxes for {3} and {4} string parameters in the SQL filterexpression:
[Code]....

And then the SQLDatasource control parameters[Code]....

The last two control parameters are the ones is question as they feed {3} and {4} parameters in the filter expression, NOTICE how I set the type="double".The data input is expected to be like 152.25 or 3.6 or 4 etc,So why am I getting this error: [Code]....

View 1 Replies

DataSource Controls :: Dynamically Change Store Procedure?

May 7, 2010

I am using SqlDataSource control to query my data via store procedure. Based on which option the user picked from the RadioButtonList control, I want to dynamically at run time to choose which store procedure gets executed. How do I do this? I am already using Query String for my parapmeters. I can could use this for the store procedure as well. The problem is, how do I get the SelectCommand to pick the store procedure name from the parameter passed in the URL?

View 7 Replies

Forms Data Controls :: Dynamically Changing The ReportViewer (with An ObjectDataSource)?

Jun 1, 2010

I have a simple web form with a dropdownlist and a ReportViewer. I would like to dynamically change the report within the viewer when the user makes a selection in the dropdownlist. I think I need to alter the ObjectDataSource that the ReportViewer is using. I've tried a few things without success.

View 2 Replies

DataSource Controls :: ObjectDatasource And Class As Datasource

Jun 24, 2010

I am really having a hard time trying to write something from scratch I created a 'Person' Class.Public Class Person

Private _FirstName As String = ""
Private _LastName As String = ""
Private _Age As Integer = 0
Public Sub New(ByVal FirstName As String, ByVal LastName As String, ByVal Age As Integer)
FirstName = FirstName
_LastName = LastName
_Age = Age
[code]...

View 1 Replies

Forms Data Controls :: Handle Sorting And Paging When Objectdatasource Is Being Built Dynamically?

Sep 7, 2010

i am building my objectdatasource dynmically when certain buttons are clicked on the page.. and with that the gridview is being displayed with the results of the objectdatasource that was built.

So my gridview code looks like this:

[Code]....

How can i enable sorting and paging if the datasource is being built on button click event?

View 16 Replies

Forms Data Controls :: Change ObjectDataSource Parameter Values In Code Behind?

Apr 13, 2010

I have a GridView control with a header template with Text Boxes so users can input new data for a new row. I need to bind the text property of each TextBox in the header row with the insert parmaeters in my ObjectDataSource.

View 3 Replies

DataSource Controls :: Objectdatasource Does Not Run?

Jan 26, 2010

I have set the objectdatasource in the web form. Does I need to check anything as I find that method "objProductSuppliment_Inserted" does not run??

-----------------------------------------------------------------------------------------------------------

<asp:ObjectDataSource ID="objProductSuppliment" runat="server"
OnInserted="objProductSuppliment_Inserted"
TypeName="BLL.WMS.ProductSuppliment"

[code]...

View 6 Replies

DataSource Controls :: Objectdatasource Does Not Bind The Name And ID?

Jan 16, 2011

I've created a query in the table adapter for retrieving customer name based on the first letter. The query is executed fine, and the output is the customer name and ID. A Customer BLL accesses this query, and sends the results to an objectdatasource. This control is configured to use this customer-by-letter query. However for some reason, this objectdatasource does not bind the name and ID, but instead all the other fields produced by the main query in the table adapter (i.e. name, address, phone, etc....).

I'm probably not configuring something correctly, but I'm not sure what.

The BLL code:

[Code]....

The .net code:

[Code]....

View 4 Replies

DataSource Controls :: BLL Add Method & ObjectDataSource?

Jan 4, 2011

My Business Logic Layer has AddItem method that add's to Items table in db along with an entry in Balance table.AddItem method uses two TableAdapters Items & Balance. Both these have corresponding Business Objects as Item and Balance.

Here is the AddItem method :

[Code]....

ASPX Page with DetailsView & ObjectDataSource

[Code]....

Now executing this page generates error as

ObjectDataSource 'ObjectDataSource2' could not find a non-generic method 'AddItem' that has parameters: _item, _balance, ItemName, GroupId, CategoryId, AuId, Rate, TotalStrScale, OffsStrScale, OffsAE [code]...

View 1 Replies

DataSource Controls :: ObjectDataSource With BLL Methods?

Jun 22, 2010

I'm creating an ASP.net website with 3 layers (Presentation, BLL and DAL).

BLL and DAL are 'class library'. DAL has a typed dataset. Presentation refers BLL and BLL refers DAL.

I wanna populate my GridViews with ObjectDataSource, but it only shows me the DAL. Nothing from BLL...

What am I doing wrong?

View 2 Replies

DataSource Controls :: Complex ObjectDataSource And ASP?

Apr 17, 2010

Consider a fairly complex business object. For the sake of discussion, let's think about a "ClassRoom" object - that will have some attributes which occur once, such as "capacity" and "area". It will also have some repeating attributes - perhaps "desks" which will itself be a collection of desk objects. The desk object will in turn have attributes such as "width" and "height".My example is more complex, but that should show where I am coming from. The business object, as you would expect, exposes methods to get the attributes in and out. There is also logic included to perform the underlying database updates. Of course, the necessary business validation is also in there.

In terms of binding to the ASP page, I will need to bind the attributes of "ClassRoom" to a set of fields on the page (using one method on the object). I will also want to bind the desks collection to a Repeater or GridView (using another method on the object).Presumably, I need to find a way to use a single instance of the ObjectDataSource so that the updates to the two (or more) disparate sets of data can be kept in step. I suspect that if I simply put two data sources on the page, I will get two instances and therefore no correlation between them.This can't be a unique problem, but I'm struggling to find any useful information.

View 3 Replies

DataSource Controls :: Get Value Of Column In Objectdatasource?

Jul 20, 2010

I was woundering if its possible for me to check for accesslevel value from the database using objectdatasouce.... From my coldfusion experience... i could just use an "if statement"

e.g: <cfif> (datasouce.column = x) then
<cfoutput> msg</cfoutput>
</cfif>

Am not so sure about .net.... All i am trying to do is to check for one value on the db and i dont mind puting it on code behind... i just need a way..

View 4 Replies

DataSource Controls :: How To Configure Objectdatasource

Sep 9, 2010

created my own stored procedure in SQL Server for my aspnetdb database which is :

view plaincopy
to clipboardprint?

View 1 Replies

DataSource Controls :: ObjectDataSource With Datatable?

Apr 14, 2010

Could I receive datatable or datarow as objectDataSource update function parameter? I need it because I need the datarow verison functionality to detect change for a column in the update function logic.this is what i had tried:

[Code]....

After I setup the update function in the ObjectDataSource , its DataObjectTypeName has a funny name

[Code]....

View 3 Replies

DataSource Controls :: How To Pass Variable To ObjectDataSource

Sep 10, 2010

I have an objectDataSource which uses my stored procedure GetNotifications

And my GridView is bound to that objectDataSource

the only problem is that my stored procedure requires the variable @UserName and then returns the values for that username, but I do not know how to pass the variable to the objectDataSource, does anyone know the code for this?

I can get userName from HttpContext.Current.User.Identity.Name but how do I pass that to the objectDataSource?

View 7 Replies

DataSource Controls :: How To Get Total Count From An Objectdatasource

Mar 29, 2010

I have a gridview bounded to an objectdatasource.

I want to get total count of record when there is paging = true or false in gridview.

View 4 Replies

DataSource Controls :: Passing Parameters To ObjectDataSource

Aug 9, 2010

I followd Brian Orrell LINQ tutorial for paging/sorting and created a gridview bound to an ObjectDataSource through a method call which gets data from adatabase. My form includes two buttons with a textbox next to each one of them. I need to be able to populatte th egridview depending on the button that was pressed, I cannot figure out how signal my method which button was pressed.
[Code]....
[URL]

View 1 Replies

DataSource Controls :: Can Bind Textbox With ObjectDataSource

Mar 9, 2011

Is it possible for me to have an ObjectDataSource and the bind a texbox to a certain field to it?

View 2 Replies

DataSource Controls :: Is It Possible To Bind DataTable To ObjectDataSource

Oct 31, 2010

is it possible to bind DataTable to ObjectDataSource?

View 4 Replies

DataSource Controls :: ObjectDataSource Binding To Querystring When Don't Want It To?

Sep 23, 2010

I have an ODS control populating a Telerik grid. The ODS definition is pretty simple. It's set to call a method on a static class that has one parameter (entityID). I set this parameter in the OnSelecting event. When I test this, the world is a happy place and all is fine.

Then, I pass a query string to the page (which sets various unrelated values for the page, we'll say parameters X and Y). The page call's Telerik's radgrid.Rebind() event. When this happens, an error is throw from the ODS saying that the underlying method (the static data procedure) does not support parameters X and Y.

So, why is ODS thinking it should be using any querystring values at all when I have explicitly set the entityID parameter (of type Asp:Parameter)? How do I stop this from happening?

The Html:

[Code]....

The OnSelecting:

[Code]....

I see this odsList_OnSelecting being hit and the inspection of e.InputParameters only contains my expected single entry.

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved