I have textbox for date input and use select statment to compare the date with textbox. but cannot success.below is my code.
Dim sds As New SqlDataSource
Dim wherestring As String
sds.ConnectionString = WebConfigurationManager.ConnectionStrings("camsConnectionString").ConnectionString
[code]...
looking for solution to fix the code every day i change by manual how can fix to current day.SelectCommand="SELECT * FROM articles WHERE (date > '23 / 06 / 2009') ORDER BY date"how can change the to current time direct
View 5 RepliesI have 2 coulmns
PromCode, StartDate , EndDate
A001 2010/05/01 2010/05/30
A002 2010/04/01 2010/04/30
C120 2010/03/01 2010/03/31
DECLARE @NOWDATE VARCHAR(10)
SET @NOWDATE = CONVERT(VARCHAR(10),GETDATE(),111) -- Get System Date
I want to use (StarDate + EndDate) compare with SystemDate to make sure if the PromCode is process or expired..
my problem is .. how to compare both StartDate and EndDate with SystemDate?
this is the result I trying to query..
PromCode, StartDate , EndDate ,Status
A001 2010/05/01 2010/05/30 Future
A002 2010/04/01 2010/04/30 Valid
C120 2010/03/01 2010/03/31 Expired
SELECT
PROMCODE
,STARTDATE
,ENDDATE
, .... AS STATUS ( does here I should use when..case? or use subquery? I try use Case..but get syntax error)from Table
When Select an entity by linq with entity framework 3.5 ...and thenn select it again using stored procedure ..which change the value for a field for that entity ... i got that with old value ...not procedure value...............When i called that procedure before .. the select ... i got the correct value.........but in my case i shall call the procedure after select with linq statment
View 4 Repliesin DataBase Attendancedate is save in this format 4/5/2010 4:16:28 PM ..i want to query like this select * from EmployeeAttendance where Attendancedate='4/5/2010' but this giv error
View 5 Repliesi get this data from history table for a paricular ConsignmentNo.
................
i want the sql statement. 1st condition is sql statement should be order by CurrentStatusDate.
.......................
I have a problem and i cant understand it.
My code :
strSql = "select * from tblannouncements where announcementdate = " & Date.Today
conn = New SqlConnection(strConn)
cmd = New SqlCommand(strSql, conn)
conn.Open()
dtr2 = cmd.ExecuteReader()
GridView6.DataSource = dtr
GridView6.DataBind()
It works but i dont receive any record and when i remove the = and enter a >
then all the records are displayed.I use datetime as data type in my database.
I also use this to add records if has anything to do with my prob but the records are added fine.
strSql = String.Format("Insert into tblannouncements values ('{0}','{1}')", txtAdminannouncements.Text, Date.Today)
conn = New SqlConnection(strConn)
cmd = New SqlCommand(strSql, conn)
conn.Open()
cmd.ExecuteNonQuery()
conn.Close()
This is how is the format in my database table : 25/02/2010 00:00:00
a user will choose a period of time (from this date to this date) with a calendar ,, and then i want to get from DB all Invoices that were created within this period ??
each Invoice has a Date saved in Database..
This is the sql select statement i am using:
SelectCommand="SELECT [invoiceid] FROM [invoices] WHERE (([location] = @location) AND ([name] = @name)) AND date BETWEEN '"+ (fromdate.SelectedDate.ToShortDateString()) +"' AND '" + (todate.SelectedDate.ToShortDateString()) + "'">
i am getting this error message:
System.Data.SqlClient.SqlException: Conversion failed when converting date and/or time from character string.
i have DateFrom and DateTo columns in tblLOgs.if they both are same then select only DateFrom else both selects.my procedure is ....do modification in them
[Code]....
I've got a gridview which works fine. I use dropdownlists which are filled with distinct values of the columns. So when I select an item in a drompdownlist the gridview refreshes based on the selected value. When I have a column which uses string values, I can start the filter with a default % value to use in my select paramaters. But when I have a date column, I can't use that. I use a datasource for the gridview and I prefer to leave codebehind out if this is not needed. Now I use >= in my gridview select to show all rows. but I want to use only = to make the filter work correct when I select a date in the ddl and use the selectedvalue in the gridview selectCommand
<asp:DropDownList ID="ddlUpdateDatum" DataSourceID="dsPopulateUpdateDatum"
AutoPostBack="true" DataValueField="UPDATEDATE" runat="server"
CssClass="selectinput" AppendDataBoundItems="true">
<asp:ListItem Text="All" Value="01/01/1900"></asp:ListItem>
</asp:DropDownList>
<asp:SqlDataSource ID="dsPopulateUpdateDatum" runat="server"
ConnectionString="<%$ ConnectionStrings:GAMSYSTEMSqlServer %>"
SelectCommand="SELECT DISTINCT(UPDATEDATE) FROM [messages] ORDER BY UPDATEDATE ASC ">
</asp:SqlDataSource>
And I use this in the gridview datasource:
<asp:SqlDataSource
runat="server"
ID="dsGridview"
ConnectionString="<%$ ConnectionStrings:DBSqlServer %>"
SelectCommand = "SELECT * FROM [messages] WHERE AND UpdateDatum >= @UpdateDatePar ORDER BY UpdateDatumDESC"
>
<SelectParameters>
<asp:ControlParameter Name="UpdateDatePar" ControlID="ddlUpdateDate" PropertyName="SelectedValue" Type="string" />
</SelectParameters>
I am using compare validator to compare date... But Its not working ...I have used calendar extender...with date format as "dd/MM/yyyy"...
View 3 Replies How to get the date at which a record is created in SQL?..i.e, if i add a record to a database table db1 at 8/10/2010 11:30, I want to get the datetime, i.e 8/10/2010 11:30..;.Also let me know how to compare datetime values..
if(8/10/2010 11:30 >8/10/2010 10:30) will work or not?
i would like to compare the current date with the date entered by user..however, i'm encountering errors so far..
i tried something like this:
<asp:TextBox id="txtDate1" runat="server" />
<asp:CompareValidator runat="server" ErrorMessage="The date must be greater than today"
ControlToValidate="txtDate1" type="date"
ValuetoCompare="DateTime.Today.ToShortDateString()" />
and i got an error stating that the value of DateTime.Today.ToShortDateString() of the ValueToCompare property of "" cannot be converted to type 'date' i also tried ValueToCompare="DateTime.Now.Date()" and i got the same error message.
i already defined culture too in page. but still it's showing enter valid date
my markup
[Code]....
I have a objectdatasource control with a field of date and time and I was wanting to know how you format the date to uk format with the select statement through my objectdatasource. And what type of integer is bigint in SQL?
View 3 RepliesI have table in database that one column is Expire date that save date like below
2015-11-23
Now I want compare it whit today date like below:
if (_dr["ExpireDate"]<DateTime.Now) {
}
But it makes error can you tell me true code for it?
I have a window that has 3 dropdownlist controls and a textbox with a Calendar Extender associated to it.
I have the following on my pageload event so when the Page loads the current Date is put in the date textbox:
[Code]....
I can change the date fine but when I select a value from one of the other dropdownlist controls it puts the date back to today's date...The only place I am setting the Date to the current date is in the pageload event...
how can I get it to keep the date to what I change it to after I select a new value from one of the dropdown lists?
How to create Jobs, I am using SQL 2005, i need a query which should get current date and compare current date with date in table and Send Email according to Job scheduled.
View 4 RepliesIn myapp, I can create two datasets: [dstServer1] and [dstServer2]. They are coming from two tables which are in two different SQL server: [Order1] (in server1) and [Order2] (in server2). These two tables have the same data structure. How to code to compare two dataset and then insert difference into another table without using linked server?
View 2 RepliesI already may have access to the solution i am after but cant find a way to keep the data and schema the same during deployment, ie development server SQL database to be the same thing as what i put on the sql server host during the deployment of the web application
i was using Quest Rocket compare to sync data and schema, it worked fine but they dropped that project with the intro by MS of VS08, ie the Quest plug-in works in VS05 but not in VS08 anyway, i probably have the solution I am after at my disposal due to my MSDN subscription which includes SQL server products, but my first problem there, is that i cant identify which MS tool to download and to use that will do the same thing or better than the Quest Rocket compare product,
i believe the solution i need is the full version of SQL Management Studio (which i think i have due to my MSDN subsctiption but my second problem 2) is i cant find in that full studio download in my MSDN subscriber area) also is it only the full verison of SQL Mgt studio and not the Express version that might have the "sync" capabiltiy, is that correct? or is there a way (I am a intemediate on SQL techonologies), within the Express Management Studio to painlessly sync both the schema and the data? I am using VS08 Pro, so mayber there is a way in the VSIDE to do the syncing, I think i tried the Publisher but ran into difficulties, am going to try that again and repost here what those difficulties were,
SO really just after a nice tool or utility that will keep SQL database schema and data the same during the deployment process for the web application i build, kinda urgent to as am buried and dont have time to breath.
I'm using SQL Server Management Studio Express 2005. I have a database that I'm trying to make an exact copy of under a new name. I generated a script, made a new database then ran the script on it. My problem is the new database is short two objects, it shoudl have 840, but has 838.
I need to find out which two objects are not there.
Maybe there is a way to copy the exact database under a new name? I tried to detach, copy to a new name and then attach, but that did not work.
I have two datatables with same columns. I want to compare those two tables and I want to know whether data in those tables is same or different. If both Prod and Qty are same then I have to get true or else false.
That is
TblOne
Prod Qty
A 2
B 2
C 3
TblTwo
Prod Qty
A 1
B 2
C 2
As of now I am looping thoruh all the rows. Is that the only solution or is there any best way to do this ?
I have 2 Linq to Entity queries, here they are:
[Code]....
In "query" there are several columns, 2 of them are NIIN and Qty. In "objViewDDRT" there are only 2 columns, they are NIIN and AvailBalance.
What I need to do is for each row in "query" check to see if the NIIN is in "objViewDDRT", and if it is get the AvailBalance for that NIIN from objViewDDRT.
I want to make some check before I add a list of data
so I create a temp table
[Code]....
and this is the qeury I retrive from DataBase
[Code]....
so now I get 2 data resultI just want to knowhow to compare these 2 data result?
[Code]....
then now allow to add new data...
Assume in my table named school has a column named StudentNo
I try this script
select * from school where StudentNo <> 'AA'
I just wondering why this where clause "where StudentNo <> 'AA' always return false when StudentNo is null?