DataSource Controls :: Upload Website With Sql Server But Some Error?
Jan 2, 2010
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance nameis correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) "This error display in myI do all type of changes in my sql server, which i find in google, but now my site can't display proper.
I have been running a VWD 2008 express and sql server 2008 express based system both on local server and website successfully, then started getting this error message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Now I cannot run this system on either local server or website.
I am developing a C# VS 2008 / SQL Server 2005 Express website application. I have tried some of the fixes for this problem but my call stack differs from others. And these fixes did not fix my problem. What steps can I take to troubleshoot this?
System.Data.SqlClient.SqlException was caught Message="Conversion failed when converting datetime from character string." Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 LineNumber=10 Number=241 Procedure="AppendDataCT" Server="\\.\pipe\772EF469-84F1-43\tsql\query" State=1 StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ADONET_namespace.ADONET_methods.AppendDataCT(DataTable dt, Dictionary`2 dic) in c:Documents and SettingsAdminMy DocumentsVisual Studio 2008WebSitesJerryApp_CodeADONET methods.cs:line 102 And here is the related code. When I debugged this code, "dic" only looped through the 3 column names, but did not look into row values which are stored in "dt", the Data Table. public static string AppendDataCT(DataTable dt, Dictionary<string, string> dic) { if (dic.Count != 3) throw new ArgumentOutOfRangeException("dic can only have 3 parameters"); string connString = ConfigurationManager.ConnectionStrings["AW3_string"].ConnectionString; string errorMsg; try { using (SqlConnection conn2 = new SqlConnection(connString)) { using (SqlCommand cmd = conn2.CreateCommand()) { cmd.CommandText = "dbo.AppendDataCT"; cmd.CommandType = CommandType.StoredProcedure; cmd.Connection = conn2; foreach (string s in dic.Keys) { SqlParameter p = cmd.Parameters.AddWithValue(s, dic[s]); p.SqlDbType = SqlDbType.VarChar; } conn2.Open(); cmd.ExecuteNonQuery(); conn2.Close(); errorMsg = "The Person.ContactType table was successfully updated!"; } } }
I have this code to upload .xls files to sql server and am wondering what I need to change in order to upload comma delimited .dat files.
Dim connString As String = ConfigurationManager.ConnectionStrings("xls").ConnectionString 'Declare Variables - Edit these based on your particular situation Dim sSQLTable As String = "tempContainer" Dim sExcelFileName As String [code]....
I have a asp.net website where I am using the Flash SWFUpload [URL] upload component.
The same code is hosted on two servers - on server A I can upload images without any problems. On server B I get Error 500 when I try to upload - no other error message. I am unable to find what server settings are different between those two servers. I cant find any solution on SWFUpload forum.
i have an aspx page which has a fileuploader and a button
initially i have to browse the file and after browsing the file i have to check the extension if the extension is xsl or xslx then only i have to enable the submit button
once the submit button is enabled i have to insert this data into the table
and i have to display the number of succesfully inserted rows and no of unsuccessfull insertions .
success and failure is dependent on the mismatch of the datatype between the excel sheet and the database column
im working with visualstudio 2005 and sql server 2005 c#,and i tried to insert an items to the sql but it gave me this error
Application server error '/ WebSite6'.
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students".The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.
The statement has been terminated.Description: The exception is unhandled occurred during the implementation of the current web request. the stack trace for more information about the error and where the source code. Details exception: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students". The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.The statement has been terminated.
This error: Line 243: sql_comm.Parameters.AddWithValue ("@ studentId", Convert.ToInt32 (id));
Line 244: sql_comm.Parameters.AddWithValue ("@ CourseId", Convert.ToInt32 (ListBox3.Items [j]. Text.ToString ())); Line 245: sql_comm.ExecuteNonQuery ();
Line 246: split_listbox2 ();
Line 247: sql_conn.Close ();
Source File: c: Documents and Settings Ronen My Documents Visual Studio 2005 WebSites WebSite6 SiteMembers CourseSignUp.aspx.cs line: 245
Following is the error I am getting while accessing some of the pages on my website.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It is trowing an exception and giving the about mentioned error.
i get error A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
I am creating a website and m half way there. Now I want to upload my website onto the remote server and want to test it from anywhere. What shall I do for this? I have created website using c# and asp.net in VS2008, while the remote server has VS2005. I have modified the connection strings in my web.config as per the server. So pls tell me how to upload the website on the server and how to test it?
Not sure why it works if i connect to SQL 2005 on another server, but now that i have SQL Express on the same server as the pages, im getting the following error: I have attached my connection string within my web.config and also how its being called within the code behind. Now this page was written by another programmer some time back.. so not sure if the method he used to do this is the best or only way. But i have connected to other SQL database with other applications with alot less code.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error: Line 131: Line 132: //connect to this sql server Line 133: c.Open(); -----> this is the line it complains about.[Code]....
i am trying to install SQL Server R2 on my windows 2003 server (I downloaded the x64 version) but on the installation directory, just before i click next, to get the error, the path is as follows: C:ProgramFiles(x86)Microsoft Sql Server im not too sure if thats the problem though, just guessing, since i dont know anyother problem, and its a new server. I also tried multiple server restarts and still got the same error.
I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio.I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem.
I have now set Named Pipes and TCP/IP back to disabled. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message:
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
My first question here is: why is it returning a Named Pipes error? Why isn't it using Shared Memory? It seems like it is not listening on Shared Memory for some reason?When I set Named Pipes to enabled and try to connect, I get the same error message.My windows account is does not have administrator priviliges on my computer.
I used visual studio 2008 and sql server 2005(for database) in my website project. After finishing my project i used publish to web option and got the files into an folder. I have installed .NET framework ,IIS, i have also set the remote connection ,firewall setting etc. But when i run i.e., In the IIS manager when i click browse it gives me the following error. Can anyone pls tell me what went wrong in this. My code works fine when run on visual studio 2008. Server Error in '/EBUSINESS' Application.
I am trying to implement a website that was developed on a test server and make it go live. I am running into an issue with a function within the DB that decrypts a password. Here is the function
I have a site that is running on a Windows Server 2008 machine with IIS 7.0, when I try to open it with Visual Web Developer 2010, it says the following:
error: unable to open site: ... The Web server does not appear to have FrontPage Server Extensions installed.
Looking on the server Frontpage Extensions 2002 are installed, so what could be wrong?
The thing is, I used to be able to open the project and work on it, etc...
Open Website -> Remote Site -> Enter remote site name -> tries to open & error above!
i used database sqlserver2008 and i make website which have database on internet serveri get ip address and username and password for that databse ;it's sqlserver 2005i want to upload database to my website ; i conccet with it by sqlserver managament 2008 ;then when i attachment database i get these messagemicrosoft.sqlserver.management.sdk.sfk how can i solve this error
When ever I try to connect to server through Microsoft sql server management studio express then an error is generated saying that
Cannot connect to .//SQLEXPRESS
Additional Information
A network related or instance specfic error occured while connecting to SQL server. The server not found or not accessible verify that instance name is correct and that SQL server is configured to allow remote connections.(Provider: Named Pipes Provider, error 40-could not open connection to SQL server )(Microsoft SQL server, Error:53)
Server Error in '/' Application. Attempted to read or write protected memory. This is often an indication that other memory is corrupt.Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
i have an asp.net application that connects to a database. I've set up the connection string with the correct server name and username/password. This use to work perfectly. Suddenly for some reason, when i navigate to the site i get a Login failed for user admin. Account locked. I check the server and the account is not locked, but just to be sure i reset the password and change my conn string accordingly. This makes no difference and i still get the account locked error message.
I have the folloing sql server error from my ASP.NET website.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
This seems to be a network related issue. But on the same machine where IIS is running, I have another C# application running that is not experiencing this problem. This happens after the website has been running for a few weeks. Will this be because the database connections are opened but not closed properly?. I wrote a test web page where i just open connection but not close it and I got Time out error when connection pooling is maxed out. Is this memory issue? Memory that are allocated are not deallocated in timely fashion?..
Everything is working fine for a few weeks and after that I get the above network error.