Dynamically Recreating Controls On Postback For Each Row Of Table?
Nov 1, 2010
For every row in my 'table' I am manually creating, there must be a LinkButton to delete a database row that matches a column in the table. Because no 2 controls can have the same name, I've had to use a GUID to name them so they're all unique.
Problem is, right now when I click Delete, the page posts back with no changes, but I've been told that I need to recreate the controls - but how do I recreate them in Page_Load when their ID's are randomly generated? Here's my code:
[Code]....
View 3 Replies
Similar Messages:
Nov 15, 2010
I have several usercontrols which are loaded based on business logic.However, all of them have webcontrols whose selected/entered value needs to be accessible in parent page on an event.Since there can be any combination of UserControls, I do not want to load all the UserControls in the Parent Page, since they are heavy.
I would like to load only those controls which are supposed to appear on the page, yet access the value from the usercontrol which caused the postback. (I would rather not access using Request.Form) (ViewState is open, but unsuccessful to store value in parent page's viewstate in onClick)Here is a sample scenario
Page: Home
Dynamically Loads: UserControls1
UserControls has TextBox tb and Button btn, causing onClick
When btn is clicked, I want to get value of tb in parent page on PostBack, Page creates UserControl2
View 3 Replies
Jun 7, 2010
In my code I create a table dynamically and I try to restore the table after a postback. But although I recreate the table during the Page_Load event with the same id's before,the table doesn't appear with the same state and values as before.
I think it will be a typically beginner error, but I wasn't be able to locate the error whereas reading different posts and tutorials related to this topic.
//Code behind
protected void Page_Load(object sender, EventArgs e)
{
if (Page.IsPostBack & _hfsubmittedURL.Value == "tbCreated")
{
TableRow row1 = new TableRow();
[Code].....
View 6 Replies
Feb 10, 2011
I'm trying to create a dynamic table (inside a gridview) with some objects. The initial creation is fine, and I store all the selectedindexes in viewstate to recreate it upon postback. This, seemingly, works fine as well, but...After the postback, when I get into the selectindexchanged even handler, I can see the new selectedindex, but the original control sending it is reset to it's initial value (because I reset them upon postback).Anyone know a fance way of doing this?Here's my code:
[Code]....
View 3 Replies
Nov 18, 2010
I know this question has been asked thousands of times, and I've struggled with it before, but for some reason, I can't accomplish what I want to accomplish... I have a dynamically added LinkButton that when clicked will dynamically add a control (in this example, a textbox) to the same panel. The intent is to continuously add on as many controls as times the LinkButton was clicked (i.e. I click it once, one box, then another click will give me 2 boxes, another click adds a 3rd). In the code below, I use the current date and time serialized to create a unique ID for each textbox control.
When I execute the code, clicking "Add Filter" will generate a new textbox, but once clicked again will create a new one, and dispose of the one before it. Instead, I want to persist the previous textbox as well as any data submitted within it.In the aspx:
<asp:Panel ID="pnlFilter" runat="server">
</asp:Panel>
In the aspx.cs:
protected void Page_Init(object sender, EventArgs e)
{
LinkButton lb = new LinkButton(); [code]....
View 4 Replies
Jan 23, 2010
I have 2 sections of my website I am developing, a reference box that has a fixed width and a working box that has the same height as the content. I am trying to make it so the user can swap the content between the two boxes. I have the following type of setup in the aspx page:
<asp:panel id="pnlReference" runat="server" CssClass="referencePanel" >
<asp:panel id="pnlsection1" runat="server" >
Content....[code]....
What I am trying to have occur is when I press the lbtSwapPanels linkbutton, it moves pnlSection1 into pnlWorking and pnlSection2 into pnlReference. The code I used to do this in the OnClick method was:
Control pane1, pane2;
pane1 = pnlWorking.Controls[0];
pane2 = pnlReference.Controls[0];[code].....
Unfortunately, this does not work. When I click the linkbutton, nothing happens. If I then do something to perform another postback the reference and working panels become empty. I assume this has to do with the change not being saved into Viewstate but I don't know how to get around that. how to do this?
well as making my asp.net ajax tabcontainer completely fail to function. After 2 swaps and postbacks, further postbacks cease to function at all. Here's the new code
<div id="referencePane">
<asp:panel id="pnlsection1" runat="server" >
Content with tab container[code]....
First postback causes the tabcontainer to fail (javascript exceptions claiming it's trying to create a tab container with teh same ID (only one exists in the original aspx page). Postbacks then proceed to do wierd stuff.
View 2 Replies
Apr 26, 2010
Figure there is a simple solution to this problem but I have been unable to find it.I have databinding in an ASP.Net application to a GridView. This gridview is bound to an ObjectDataSource as per standard usage.The problem I have is that one of my bound fields uses the property DataFormatString="{0:C}" and due to the currency format being displayed when an update is attempted and the object recreated I get a error as such "$13.00 is not a valid value for Decimal."Clearly this is a result of the column using a FormatString and then attempting to bind it back to a decimal property I have in my object called UnitPrice.I am assuming there is some markup I can set that can specify how the value is translated back?For anyone curious the solution ended up looking like this...
<asp:TemplateField>
<HeaderTemplate>
UnitPrice
[code]...
View 1 Replies
Jun 3, 2010
I'm passing a List to an MVC view and generating checkboxes for each object in the list (The checkboxes are named t.Name).I'd like to be able to tell which checkboxes were checked once the form is posted. However, I'd like to avoid using the FormCollection object.
View 1 Replies
Jun 11, 2010
My problem is:
I've got a table, dynamically created, fill with a lot of dropdownlists witches IDs are dynamically created.
When a button is pressed, I need to scan all controls in the table and save their value.
But after the postback I can't no longer access to the table.
View 2 Replies
Apr 27, 2016
I have a stored Procedure, which copies the data in one table to another table in other DB.
I have the query to copy the records to other table.
But, tomorrow, new columns are added to the source table, then, how to dynamically copy the data from those columns to the destination column..
View 1 Replies
Mar 2, 2010
First, I would like to apologize, the search on the site wasn't working, so I don't know if I'm missing an existing post or not.
I have a web page that uses a master page file. I am using a third party control from Component One(TabStrip), the tabs are rendered as links on the final page. When a tab(link) is clicked, I need to load the appropriate web user control associated with that tab. Each web user control has its own post backs and methods. I know that I can load the controls on the "SelectionChanged" event of the TabStrip control, but then any postback created by the web user control that is loaded causes the page to refresh and the control was never loaded in viewstate. So, I tried to put my procedure of loading the web user control into the page_init method. This would work, if I could read which link was clicked on from within the page_init method. I tried using a javascript function to run "onclick" of the tabs and within it setting the value of a hidden control. I have verified that the javascript works and that the hidden control's value is getting set correctly. When I get into the page_init method, the value of the hidden control is not readable.
I'm tying to understand the page lifecycle to the fullest, but I don't see what I'm missing here. I know that I need to load the web user controls in the page_init method in order to persist the page as a whole, but how can I get which tab(link) was clicked to know which control should be loaded?
View 5 Replies
Mar 25, 2011
I allow the end user to create a tab control dynamically in an ASP.Net page by getting some details. For each and every tab added I get some settings -
Tab Title
Tab Content
Tab Footer link
So I get these details for each and every tab. The user is provided with a button 'Add Tab' to more one more tab. So I need to add one more tab settings panel in the page to get the tab settings. But doing so, I lose the values entered in the previously created dynamic tab settings panel. The user can add as many tabs and enter settings for each and every tab. Finally when they save it I build the tab control (based on their settings and content) and I render the control.
Since the controls are dynamic, I'm able to thing of two options -
Recreate previously created n - 1 tab settings panel while adding a nth tab. So across each and every postback I need to recreate the settings panel for each and every tab. But I don't know how to persist the values in this case.
Add the settings panel in the client side with simple html controls and on page UnLoad parse the controls -> Parse the settings -> Save it in a hidden field -> Get it in the server side. In this case I lose all the server side capabilities where I need to write validation scripts for the controls.
View 3 Replies
Oct 7, 2010
So I have two UpdatePanels. I am dynamically creating server-side buttons in UpdatePanel2. When the buttons come out, they are not hooked to the asynchronoustriggers of updatePanel1.
So how can I dynamically add these triggers of these newly dynamically created buttons so that clicking these buttons will only cause a partial postback to UpdatePanel1 ? Right now, when I click these buttons, it causes a partial-postback refresh to UpdatePanel2 (the panel itself that which the controls reside in)
View 4 Replies
Aug 8, 2010
i'm trying to do a simple wallpost function like facebook. I hv a link to show older post too. when i click on the link, i would like to dynamically retrieve another 15 record from database and add it. Currently i'm trying to bind the data onto a dynamic repeater and add it in a placeholder. but it will disappear after postback.i tried to dollow sample here, but i'm adding a more complicated control which is reapeter , so i'm stuck.http://www.asp.net/ajax/videos/how-to-dynamically-add-controls-to-a-web-page and another issue. if i click the button again, it will show the next 15 old record again, but i dont want to rebind the repeater coz then it's a waste of resources and also it will make any text that was entered in the comment textbox (which is not submited yet) to lost.
View 4 Replies
Feb 2, 2010
I have a small form with some static elements that I am able to access with javascript the bring up a popup. 4 textboxes are generated and attached to a updatepanel. I've been trying various methods of validating the contols without generating postback.
I found anytime i registered a javascript to the scriptmanager the page must refresh.
Is there anyway it can be done?
View 1 Replies
Aug 13, 2010
I created a templatefield programmatically and it works fine but whenever I clicked the button inside the gridview and do the postback my templatefield are gone.
View 3 Replies
Mar 3, 2010
In design time I created a Gridview and a delete button in a page test.aspx:
[Code]....
The program stopped at statement "if ((row.Cells[COL_INDEX_SELECTED].Controls[0] as CheckBox).Checked)",
because it cannot find the checkbox created before.
I tried to shift all the code in Page_Load to Page_Init, but the ticked checkboxes are still lost.
I could find the ticked checkboxes names in its request object parameters(this.Request.Params.AllKey) if I setup a breakpoint on the error statement.
Does anyone konw what's happening and how to retrieve the selected rows?
View 6 Replies
May 10, 2010
I have a grid view that is dynamically created.In which every cell in the girdview has a 2 textbox (cTxtboxQty,ctxtWorkOrder) and 2 label.
When user click on the cell, a pop up come out and user are able to change the text inside the cell and click save.After that the pop up close and changed data immediately reflected on the screen.
My problem is:
After my data are changed and updated to database on the pop up page and having it post back to the parent page , my dynamically created textbox in gridview retain old value even new value has been assigned to it.
This sound very weird but i have no idea how to solve this.
My client side code is as below :
[Code]....
[Code]....
[Code]....
[Code]....
I have tested many times and find out that it might be the page hold the old value in memory, so that even we have updated the textbox value, after postback, it still keep and show the old value?
View 1 Replies
Jan 6, 2011
i wrote a function to create dynamic table in code behind on selectedindexchanged of checkbox,that is when user will check 2 checkboxex 2 tables will be generated with textboxes,Then on button click i want insert values of these textboxes in database,for that i want to find textbox using findcontrol,but i could not find it,
So i called same function of table creation on page load,but then it shows error that textbox is having duplicate id
View 2 Replies
Jan 29, 2010
I have one table control "table1"
And added controls to it in click event of one button as :
[Code]....
but i cant retrieve this controls in click event of another button. i think it is because of postback.
View 1 Replies
Mar 9, 2011
Im creating a table dynamically in my codebehind to display some statistics. The table is in a usercontrol. When the page first loads, its created and displayed correctly. If I do something that generates a postback, the table subsequently disappears, this is because its created inside a !IsPostback. How can i ensure that the table, once its been generated, stays visble on the page ? I dont want to generate it each time the page loads as it involves a lot of calculations on the database which will slow the pageload down.
View 4 Replies
Feb 9, 2010
How can one create a Table dynamically in SQL Server?
View 4 Replies
Feb 9, 2010
How can one create a table dynamically in SQL Server?
View 3 Replies
May 18, 2010
Say for example, I have script like below whereby everything is same except the table name and each table name will append an incremental number, is it possible for me to have a for loop to dynamically add the incremental number?
CREATE TABLE Persons1
(
P_Id int,
[code]...
View 5 Replies
Apr 19, 2010
I need to let my user add rows dynamically to a table, and after doing some research, it seems the best way to do this is through a GridView bound to a DataTable. However, I'm really struggling adding dropdownlists to the datatable, and this showing them in the gridview.
Here's the design I want:
ddl1 | ddl2 | ddl3 | ddl4 | ddl5 | ddl6 | ddl7 | textbox
When the user opens the form, he or she will be presented with one row. ddl2 etc will be populated when ddl1 is selected etc etc. When appropriate, the textbox will be enabled allowing the user to enter a comment (this is to report errors, and since users are, at best, not to trust to write the same thing twice, I need to use ddls.
Now comes the question - how do I add a ddl to the datatable? I've tried several ways, but I cannot get them added.
View 2 Replies
