FormView In Edit Mode?
Oct 1, 2010I'm using a FormView but I can not put it in edit mode. The formview is connected to a sqldatasource whose query receives a parameter from other form (using a querystring).
View 1 Replies
Similar Messages:
AJAX :: AsyncFileUpload With FormView In Edit Mode
Feb 16, 2010i am getting some errors with my asyncFileUpload. I have a page with <formview><updatePanel><AsyncFileUpload>
when it is in ADD mode, the page works fine. Now I put it in EDIT MODE. I open the page and it works fine but as soon as i try to upload an image the nightmare starts. Debuggin I can arrive to these conclusions:
when I open the page for the first time, the sequence is: method load, AdFormView_ItemCreated (empty method), the Bind Process, AdFormView_DataBound.... Everything is ok. I click the button to upload and: AdFormView_ItemCreated, CONTROLSKIN(), Load, DataBound... but at this point controls are not recognized. The FormView has not been created.
Forms Data Controls :: Edit Mode In Formview
Feb 26, 2010This is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 RepliesForms Data Controls :: Specify That FormView Is In Edit Mode In An If-then Statement?
Oct 21, 2010I'm trying execute code only when FormView is in Edit mode ---but the code following line this is being executed even in read-only mode.
If formname.CurrentMode
= FormViewMode.Edit
Then
Forms Data Controls :: Formview From Readonly To Edit Mode
Jan 14, 2011there are 2 pages (SummaryGridviewPage.aspx and FormviewPage.aspx) there are insert, item and update templates in the FormviewPage 1st case - there is no problem to insert new record, select and update action in the FormviewPage
2nd case - However, there is problem when i select a record in GV and direct to FormviewPage for edit this code is added in Formviewpage to open the record at readonly mode, no problem
Private Sub RF_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Session("RecordID") <> "" Then ' to check New or Old record
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.ChangeMode(FormViewMode.ReadOnly)
End If
End Sub
however, no record if go further from readonly to edit mode then Code is added to the Edit button
Protected Sub BtnEdit_Click(ByVal sender As Object, ByVal e As EventArgs)
FormViewProject.ChangeMode(FormViewMode.Edit)
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.DataBind()
End Sub
Now edit problem is solved but when go back to the 1st case (new record, and then edit) Now new record can be inserted, and then show it in readonly mode. but then try to go to edit mode, no record show i think BtnEdit_Click code is conflicted with the built-in "Edit" command Could anyone show me some info how formview retrieve specific record in a proper way?
Forms Data Controls :: Clear Fields In Edit Mode Formview?
Mar 2, 2011I have a combobox that is used as a control for Formview, so when the user selects a name from the combobox the data in formview displays in edit mode. However, some if the data that is displayed in formview needs to be empty. For example if the Date is being pulled in, it needs to be empty or null in edit mode.
View 4 RepliesForms Data Controls :: How To Refer To A Control (label) Which Is On A Formview (in Edit Mode)
Jan 14, 2010How to refer to a control (label) which is on a Formview (in Edit mode). The formview is on a Multiview...
View 3 RepliesForms Data Controls :: Update Binary Image In FormView Edit Mode
May 30, 2010I'm having a hard time solving what should (I think) be an easy problem. I have a formview defaulting to Editmode. One of my data fields is a binary image. How can I change the editItem template to allow a user to upload a new image into the binary image field?
View 2 RepliesForms Data Controls :: Switch FormView To Edit Mode From Repeater ItemCommand?
Sep 30, 2010The following code successfully displays a record in a FormView and sets the FormView mode to 'Edit' when the user clicks on a LinkButton within a Repeater, however the record is not Updated. If I don't change the .SelectCommand and call .DataBind, I'm able to update the first record that is displayed. Naturally that's a moot point because the idea is to be able to update the record that the user selects in the Repeater.Because of the design of the FormView and Repeater, the record *must* be updated via the FormView. Updating the record via the Repeater is not an option.
[Code]....
Forms Data Controls :: Can't Seem To Retain Label Values In Formview Edit/ Item Mode
Mar 15, 2010In web config file I have add key values specified.
In the formview I have labels on edit , item and insert mode that I want to display all the time by getting those values from web config. I'm able to do that with no problem but when I change the modes between edit to insert or item view, I lose those label values until I hit the "select" twice from the Gridview, those values re-appear. Below is the snippet of the code. What do I need to do to retain the category values all the time?
[Code]....
[Code]....
Forms Data Controls :: Populate Textbox In FormView Control In Edit Mode With Querystring?
Sep 9, 2010I am simply trying to get a querystring value and pass it to a textbox in a formview with the default view set to edit mode.
Protected Sub fv_Detach_Engine_DataBound(ByVal sender As Object, ByVal e As EventArgs) Handles fv_Detach_Engine.DataBound
If fv_Detach_Engine.CurrentMode = FormViewMode.Edit Then
Dim tbx_IDProfileAccount As TextBox = TryCast(fv_Detach_Engine.FindControl("tbx_IDProfileAccount"), TextBox)
If tbx_IDProfileAccount Is Nothing Then
tbx_IDProfileAccount.Text = Request.QueryString("IDProfileAccount")
End If
End If
End Sub
Forms Data Controls :: Show FormView In Edit Mode With Specific Table Columns Depending On Their Genre?
Sep 8, 2010I have a table in my database called "Profiles". This holds data on Female and Male personal characteristics.On my aspx, I have a formview in edit mode which is binded to an object data source with a GetDataByUserId Select methodwhich retrieves data from the "Profiles" Table via a DAL.The "Profiles" table has some columns which relates to females only and some just males and some are generic to both.See example below
UserId - / of Type GUID
GenreId / of Type BOOL.
Hip Size (For females)
Dress Size ( For Females)
ChestSize (For Men )
TrouserSize (For Men)
Weight ( For both )
When the User logs in , they go to an update Page which has the Formview in Edit Item Mode and contains drop down Lists whichare binded to the Users Selected Value. The DDL are in turn bound to their related table such as HIP, Dress, Chest, Trouser etc.bjectiveIf a female user logs in I just want to show them the (Hip Size) DDL and DressSizeDDL in the Edit item template of the formview and not the ChestSize DDL or TrouserSize DDL.At present the GetProfileByUserId returns all colums from the tableMy question is how do I do this and just show DDL which are relevant to the Female or Male Only. In some cases the usermay not have selected an item in the previous form so they could also be NULL.Am i on the right path by writing a Select Query that checks to see if the User is Male or Female by checking the Genre column in Profiles first.Do I also need 2 panels, 1 to hide Female DDLS and the other to Hide MaleDDLs subject to logged in user genre.
FormView From Insert Mode To ReadOnly Mode
Feb 23, 2011have a WebForm with a Form View to insert new items in my database.These items that i will insert also are conected to other many-to-many relations that i also wanna add after my new item is inserted.For Example: With the classic Autors-Books data base (autors with many books each books with many autors), i want a FormView that for defoult enter to the InsertMode where you will add a new Autor with name, age, style, etc... After you insert this new autor i wanna show the details of this autor but also his books (when new this table will be empty) and below that table i want a button that says "Add a new book to this autor"
View 1 RepliesForms Data Controls :: Gridview Is Showing The Edit Mode After The Edit Is Done
Mar 30, 2010I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
Forms Data Controls :: How To Edit GridView All Rows In Edit Mode
Dec 4, 2010- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
Forms Data Controls :: Change Edit And Cancel Link When In Edit Mode On Gridview?
Aug 18, 2010How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 RepliesForms Data Controls :: Click To Edit Button Twice In Form View To Change To Edit Mode?
Mar 1, 2010I have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
AJAX :: AJAX Inline Edit Box Control In GridView Displaying In Edit Mode?
Aug 18, 2010I have two InlineEditBox.NET controls in a template field inside a GridView. When displayed in the GridView, the first row is OK, but starting with the second row, the controls are automatically displayed in edit mode when the page loads, and I can't figure out why.
[Code]....
Web Forms :: Change Formview Mode On Database Value?
Dec 20, 2010Is there a way to change the mode of the formview control base upon a value that is retrieved from the database. Something along the lines below?
db value | formview mode
1 read-only
2 insert
3 edit
ADO.NET :: Can't Render FormView With EntityDatasource In Design Mode
Sep 10, 2010I'm not sure if I'm placing this in the right spot but since it has to do with Entity Framework I put it here. Here's the deal. I have a FormView bound to an EntityDataSource. The FormView is a part of a user control. In design view on the user control, the formview and the entity datasource show up as expected. However once I put the user control in an aspx page, the formview won't show up. The entity datasource shows, but the formview doesn't.
Instead I get this message in design view: "There was an error rendering the control. Value cannot be null. Parameter name: owner" I don't have any parameters in my datasource or formview called owner. Is it talking about the database owner. By way of comparison, I put a SqlDatasource on the page and tied it to a formview. It showed in design view on both the user control and the aspx page. So that led me to believe it has something to do with the formview being bound to the entity datasource.
Datagrid In Edit Mode?
Jan 19, 2010I have an editable datagrid. In debug mode, the page works just fine. Outside of debug mode, when I edit a row in the datagrid and click edit button page just refreshes, not debug datagrid
View 10 RepliesHow To Edit Mode On Any Row Of GridView
May 13, 2010When I am in edit mode on any row of my GridView and I press Return while the focus is in one of the row's textboxes, instead of triggering the update button, my GridView1.RowEditing event is fired with a NewEditIndex of 0 This causes the first row to become editable and I lose any values typed into the previous row. How can I stop this from happening?
View 1 RepliesADO.NET :: Table In Edit Mode?
Nov 14, 2010i have 5 records in the table Student residing in db Aparna . i am inserting the records at the click of submit button . now i want to open the table at runtime in edit mode ie my table also has edit button which when clicked opens a particular record given by the user .Edit button has 2 buttons update & Cancel.then i waant to update the record & cancel acc to need . Is this possible ? how?
View 1 RepliesWeb Forms :: Click Menuitem Change Formview Mode?
Aug 2, 2010I have a search page, detailspage with formview and formview has multiple templates (item, edit, insert).
At the master page (I use vb as code), I have a menu with menuitems (for example "New Contact"), what I want is when I click on the New Contact menu item, I get redirected to the page with the formview on it and the mode of the formview is set to insert.
How can I do this?
My menu is as followed:
<asp:Menu ID="NavigationMenu" runat="server" CssClass="menu" EnableViewState="false" IncludeStyleBlock="false" Orientation="Horizontal">
Forms Data Controls :: Changing FormView Mode Using VB.net?
May 30, 2010I have created a FormView whose defaultmode = "insert". When loaded the FormView displays the InsertItemTemplate. At the top of the page is a DropDownList used to select Clients. I have added a list Item to the DropDownList with value = "0" and text= "Select Client" option. So the Page is in Insert Mode. SO FAR EVERYTHING IS AS EXPECTED.
When I select a Client from the DropDownList, the page remains in Insert Mode (Don't understand why? ) Could it be the default Mode setting? So I added the following vb code.
Protected Sub ddlSelectClient_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlSelectClient.SelectedIndexChanged
If ddlSelectClient.Text <> "(Select Client)" Then
If FormView1.CurrentMode = FormViewMode.Insert Then
FormView1.ChangeMode(FormViewMode.Edit)
End If
End If
End Sub
So after an existing Client is selected, the FormView Mode should be changed to EDIT. AND INDEED THE EDIT ITEM TEMPLATE IS DISPLAYED.
Ah but life is not so simple (after all this is a Microsoft Application). So I enter data in some fields and click the [Update] Button.
Then I get the following message:
FormView 'FormView1' must be in edit mode to update a record.
THe FormView displays the Edit Template, the Update and Cancel Buttons are displayed. All this should mean I am in edit mode.
Just call me FrankenSoft !@#$%^^& or is it MicroStein?
Oh by the way I'm using Linq to SQL data sourcess. Should I be? I'm having a lot of problems with the FormView using Linq.