I have added a table to my FormView Edit template for structure and a button that pops up a form for information.
When the button is clicked I want a check box in neighboring cell to become checked. But I am having problems in the VB code behind, establishing the name of the check box to change its state. Its something like this....
FormView1.ItemTemplate.(CheckBox1.Checked = True)
I keep getting a null reference when I try to access a listbox inside the EditItemTemplate of a formview. I check the mode before accessing the control (Formview1.CurrentMode) to make sure it is in edit mode and even set it manually to edit mode again! But formview1.findcontrol("blah") returns null. Formview1.EditItemTemplate does not have a FindControl method, not sure what else to try.
View 1 RepliesI have a UserControl inside the ItemTemplate of my FormView and I need to access it in order to get an event fired off. As the UserControl is inside the template, my event cannot see it!
View 4 RepliesI would like to ask if it is possible to access data on a master FormView from a nested detail FormView.
I have a main form (master) with several tabs (detail) and would like to display a label with text from main form that is hidden by the tab at the moment of editting. My asp page looks like this.
[Code]....
Is it possible to get the value of the label CompanyTextLabel from CompanyTextBox using just ASP.NET expressions or something similar without writing c# code in .cs file?
i have a UP and DOWN buttons ouside a gridview and a checkbox inside the templated field .I will check the checkbox to sleect a row , after that if i click on UP button the checkbox above the selected checkbox should be selected.
same with when i click on DOWN button the checkbox below the selected checkbox should be selected.
I have a grid view with two columns...one column has a no. like (123) and a check box....which user can checked or unchecked......all I need to do is that I need to disable the man handling of that check box......rather I would like to see a seperate grid view with the same no. of rows as of the first and in this gridview I may allow to type in or scan the no. and if this scanned or typed number matches any no. in the first gridview number then the corresponding check box should be checked/unchecked.
View 1 RepliesI have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
i am try to access control Label in header template of forview i have tried following code but it doesnot worked.
Label l =(Label) frmuserDetail.HeaderRow.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
Label l=(Label)frmuserDetail.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
If am trying to change the background color of a Label in C# code behind based on the value of a check box in a DetailsView.
if ( DetailsView5.Rows[0].Cells[5].Text == "1" ) "red"; )
{ Label5.BackColor = }
<asp:RadioButtonList ID="RadioButtonList2" runat="server" selectedvalue='<%# Bind("FieldNameTbl") %>' RepeatDirection= "Vertical" RepeatLayout= "Table">
<asp:listitem value="0">I</asp:listitem>
<asp:listitem value="1">T</asp:listitem>
</asp:RadioButtonList>
This is how it works for a radio button list in a formview insert template.
How do I check if a textbox in a formview has changed when I click "Update" (in Edit mode)? TIA. I use VS2008 and Framework 3.5.
View 2 RepliesI have an access database where when the record is updated I would like to automatically check a box and update the date to the current date in an Access 2002-2003 database. I've tried this for several days without any resolution and can't find anything that works on the net. ...I'm new at this.
I'm using VWD 2005 Express and Expressions Web 3.
Here is a short version of the code.
[Code]....
In the website I'm building, I have a form that allows new users to register. Part of this page has mandatory address fields, and I use a postcode lookup field which returns a SuburbID and FullSuburbName (Suburb, State & PostCode) to a RadioButtonList inside an UpdatePanel.
[Code]....
I then handle the insert process in codebehind, and all this works perfectly on my New Account page.What I'm trying to do now, however, is replicate this functionality in the Edit Template of a FormView on my Manage Account page. The idea being that the user can view their current details in the ReadOnly view, then switch to Edit view to change their address (amongst other details of course). When the FormView changes to Edit mode, it should display the user's current PostCode in the textbox, and the RadioButtonList should display the available Suburbs for that PostCode, with the user's current SuburbID as the initial SelectedValue. If the user changes the PostCode and hits search, this refreshes the RadioButtonList with the new list of Suburbs, and once they have selected a new SuburbID this should get written back to the DB with the rest of the form (when they click Save I mean), using the SQL Data Source Update element. However, I simply cannot get this to work inside the FormView Edit Template and
So far, I have tried to handle the FormView's ItemCreated event and populate the RadioButtonList with the Suburbs that match the user's current PostCode, but if I do this with SelectedValue='<%# Bind("SuburbID") %>' in the RadioButtonList, I get the error "Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control."If I then change it to have the SelectedValue populate from the codebehind, this works on the initial switch to Edit mode, but when the user changes the PostCode and hits search, I get a different error "'rblSuburb' has a SelectedValue which is invalid because it does not exist in the list of items."My thinking was that rather than binding the RadioButtonList I would just add the new SelectedValue in the SQLDataSource_Updating method, but it doesn't seem to like that either.
have a gridview inside a formview is it possible to show running totals in the gridviews footer section? the gridview is populated with two parameters outside of the formview. Im using .vb
View 2 RepliesI have taken checkbox inside gridview. And also one linkbutton. When i click on linkbutton to check whether this checkbox is checked or not.
I have some code snippest.
[Code]....
How do I access a specific control within a FormView's "<InsertItemTemplate>"?
View 2 RepliesI am trying to access accessing a control in a Formview. I have tried several methods, but nothing seems to work
[Code]....
[Code]....
Ok i have a dropdownlist inside a formview.When i select to update the formview the dropdownlist will automatically go to the first item on the list.
Is it possible to keep the item that is currently selected before i go to the update formview page?
I can get the dropdownlist from the formview with Findcontrols but then?
P.S. My dropdownlist is declared inside the formview
[Code]....
I have an ObjectDataSource giving me data similar to: OrderNumber OrderDate OrderValue OrderItems The first three are simple data types and the last has multiple occurrences of another class: OrderLineNumber OrderItem OrderQuantity The ObjectDataSource will only contain one row (which might make things simpler). So, there will be one OrderNumber, OrderDate and OrderValue; and then several occurrences of OrderItems (each containing OrderLineNumber, OrderItem and OrderQuantity).
I am displaying OrderNumber, OrderDate and OrderValue in the FormView - that work's fine, as expected. I have placed a GridView within the FormView and am failing miserably to get it to bind to OrderItems. I have tried the obvious things like specifying "odsWhatever.OrderItems" as the DataSourceID for the GridView, but to no avail.
So I have tried both the Ajax Control Toolkit (which didn't work -- page didn't even display, got an error message about assemblies not registered.
AND implement use of the JQuery datepicker. Which I do have working OUTSIDE of FormView. Once I put it in FormView it doesn't display. Spent all day on this crap and have absolutely nothing to show for it but a bunch of code that doesn't do what I want it to....grrr...my inadequacies are irritating me (can you tell?)
Any help to get it working inside the Formview and bound to the Date field for my insertemplate. The FormVendorVisit is only used to insert the following fields: vendor_visit_id (identity / pk / not even visible on the formview inserttemplate), vendor_id, time_spent, date(this is where I am running into problems getting a popup calendar to select the date. My "ButtonInsert" in the formview takes care of the rest and works perfectly if I enter a date manually.
Here's my code on my aspx page:
[Code]....
My code behind vb page doesn't have too much in it yet and nothing with the datepicker:
[Code]....
[Code]....
The above code works if there are controls directly inside a update panel. But what if I want to disable a button or a tex box that is inside an Edit template of a formview.. that is in a panel.
[Code]....
im learning webforms and asp.net in general and what i have so far is a formview that displays data being pulled from a sqldatasource, but i also want a checkboxlist that can be used to input information and display information. this checkboxlist is insode the formview. the problem im having is that my formview is calling a datasource with an specific stored procedure with one table and my checkboxlist needs to called another stored procedure that has a different table. formviews does not allow you to have tow different datasources so how can i make this possible? ill paste the front end code and the backend code so you guys can see what im trying to do.
[Code]....
backend:
[Code]....
and my util where the booleans are being set
[Code]....
I am trying to munipulate date in a label associated to a textbox inside a formview. The label is a textbox charater counter. I receive the error "NullReferenceException was unhandled by user code." The code works fine without the formview but now I need the formview to have a gridview associate data to the formview.ASP.NET Code
<asp:FormView Id="frmvStat" runat="server" width="85%">
[Code]....
[Code]....
Javascript
[Code]....
[Code]....
I've been searching all day for a solution to this, but nothing has worked.
Here's my scenario: I'm binding the gridview to a datatable. One of the columns is a textbox that will accept user input.
When a "submit" button is clicked, I need to loop through all the rows, get the textbox's text, and add them all together. Simple, right?
I've tried the following (this is on the "submit" button's click event):
[Code]....
The itemtemplate looks like this:
[Code]....
The txtDays.Text property is ALWAYS empty. UNLESS I assign it a value w/in the control. But then it's ALWAYS that value. I need to get the value of what the user enters.
protected void FormView1_ItemInserted(object sender, FormViewInsertedEventArgs e)
{
// Here I want to make a label "Saved" visible after user inserts the record into the formview.
// the label is in InsertItemTemplate of the formview next to Insert and Cancel Links. It is invisible by default.
// Is this the right event that i am in to do something like this.. if there is any other way to do this,
}