Forms Data Controls :: Can't Get Output From ListView
Feb 28, 2010
I have a webpart that outputs a ListView control. Typically, I create a business layer that contains all my db calls, put an ObjectDataSource on the page, and tie the ODS to the BLL, and wire the ListView / GridView to the ODS. I've tried moving that paradigm into a webpart and can get the ListView to work if I use a tableadapter as the datasource. However, I would like to use my ODS / BLL structure. When I run the code, I dont' get any output from the ListView. Here is the code:
I am simply trying to change the listView template based on a value in the listview data. I do have this displaying the information correctly. Except when I try to change the item template based on a value in the listview. My code is below ....
I have a ListView, I've setup to use an ObjectDataSource, I've created my Layout and Item templates, and I'm able pull and view a list of my data no problem. However I want to add delete capabilities to my ListView and my reference material tells me to go into the "Configure ListView..." option under the ListView's smart tag, the only problem is I don't have that option, the only three options in my smart tag are "Choose DataSource", "Configure DataSource..." and "Refresh Schema", what am I doing wrong?
I have anested ListView control. I also implemented a jQuery to automatically expand the TextBox control inside of the nested ListView Insert Template. The problem is, when the Textbox expand, the outer ListView control is not; therefore, the Textbox control expands underneath the buttons of the outer listView control. How do I expand the outer ListView control as the nested ListView textbox is automatically expand? One great example is in Facebook where if I add a response comment, it'll automatically push any comments below mine down. If nested Listview control is not the best way to do this, what are my options?
Does anyone have an example for how to create a Dynamically Templated Listview with prefernces page to specify which columns & column order)? Also the listview would also have Edit, delete and insert options if possible. And uses the n-tier approach with Bus Layer and does NOT use LINQ.
Is there any way to enable alternative ListView (LV2) or any other control in case when ListView (LV1) returns no records from DB? I already have emptydatatamplate designed for this case, but I need to enable a new ListView below in this particular case and I don't know how to achieve this!
I try to datbind a listview which is inside another listview InsertItemTemplate.
[Code]....
I'm binding the listivew in the parent listview onitemcreated events. I receive the error Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
I am having trouble finding how to solve the following issue :
I am using nested listviews to display Sales and Sales details.
The main ListView displays General Information about Sales and the child ListView displays the detailed information about one sale. the child listview is shown only when the user clicks on a link (see included code, DataBind is made on PageLoad) :
ASPX Markup Code :
[Code]....
C# Behind Code :
[Code]....
If I removed the datapager part, I can manage show/hide the child list view on the button click event. but if I want to use the DataPager with the PreRender event handling, the child listview is not longer shown on button click.
The form allows a user to create and edit one estimate.
Each estimate can contain multiple Jobs, which are represented in a ListView.
Each Job can contain multiple Parts, which are contained in a ListView that sits in each item of the Jobs ListView.
A user can add and remove as many Jobs as they want.
A user can add and remove as many Parts to/from each Job as they want.
I have no issues adding to each of these, but I do have a problem removing a single part from a single job.
For a reference, here is one Job in the Jobs ListView on the form:
I want to make sure that no matter what a user does, the part of the form they are working on saves what they have. Removing a row from that Parts ListView is no exception. What I want it to do is save the values in each of those textboxes and then delete the necessary row.
Here's what I have in the codebehind:
[Code]....
The EstimateRow variable I create does not get a value from theListView)HFERID.Parent.FindControl("LVEstimateRow") bit of code. There must be another level of nesting that I'm not accessing correctly, because it can't seem to find that nested ListView.
I have a datakey defined on my outermost ListView. When I click on a linkbutton in a row in this listview, the second listview is displayed. This inner listview has several controls and also a linkbutton. When I click this linkbutton, it gets handled by its own event; linkbutton_click. In this event all the data is collected from the innermost listviews' controls, and sends it to the database. The only thing I need within this event is the datakey from the outermost listview.
how to do this when the checkbox in listview layout template check select all checkboxes in listview itemtemplate.I dont give 'Eval 'field to checkbox present in itemtemplate.
I have a listview and a dropdownlist that is pulling from an SQLTable that I am using to insert data into the ListView, which is associated with the SQLTable. For the life of me I cannot figure out how to get this thing to not allow duplicate entries into the listview.
If I could get at the data that is inside the ListView I think my problem would be solved. At the moment all the code I have is to simply find if I can at least get the data down to something I can compare, from that step I will have no problem writing something functional, at least functional for my needs. I really could use a hand with this:
[Code]....
I don't personally have access to the SQLTable, but I can have somebody make changes if this should/needs to be done from that end, but I would rather do it from this end in VB. I've been digging through the MSDN Libraries
I am trying to populate the ListView using LinqDataSource data source but the issue I am having is.I need to load the listview on Search button click action.
IN the page_load I kept like this: =========================================== LinqDS.Selecting += new EventHandler<LinqDataSourceSelectEventArgs>(LinqDS_Selecting);
protected void LinqDS_Selecting(object sender, LinqDataSourceSelectEventArgs e) { e.Result = ObjectDS; } ============================================= This works fine but this happens on page load,i want this binding to happen on button click?is there a way to do this?
I'm trying display data from a sqldatasource but I need to customize fonts, sizes and layouts. What would be the best way to do this. There's not much data only 8 rows and 3 cloums.
It's for a display screen that will show workers how much product they have produced.
I was looking at binding the data to lables and laying out the lables in a table but that process looks intense and streching my knowledge.
I am building a SortedList object for use as the DataSource of a GridView control. The key-value pairs are being built manually with the "key" fields being inserted in already sorted order. The "key" column is invisible with the "value" column the single displayed data item. I set the DataSource property of the gridview to the sortedlist and call the Bind method. The gridview then displays the data in random fashion!
Using VB.net: I have several collections, each collection has several items and each item has several 1-d arrays (all the same length). Is it possible to print each one of these arrays through an ASP Control?
First off, suggest better ways if you want rather than patch up this code. I am just starting this project and it is first time I have tried to code a web site so anything you suggest is very much welcomed. I have spent the last 2 and 1/2 days trying to find workable answers to this but none I have found and tried seem to fit. If needed I can email screens shots or code. I am trying to construct a website that will have the same main theme throughout as far as the header, navbars sitemap, and footer go. Naturally the content will vary from page to page. I want to use a single master page and css stylesheet for this main theme and I will change the content format as needed per page because each page may vary somewhat.
However, about 15 of the pages will all use the same format for their content and this format will differ from the rest of the site but the format of the main theme will stay the same. So I am trying to create a nested master page to use to format the just the content area for all these pages while retaining the main theme for the header, etc.. I believe I should use a separate css file with the nested master page to handle the formatting of the content areas for these 15 pages. I have code that looks like it works when viewed in web developer but design view but does not work when viewd through a browser (IE, Chrome, Firefox). So far I have the following done in web developer.
If it helps the code and screen shots follow. Master Page called "Parent.master". For all theme throughout site Nested Master Page called "Lab.master". For the 15 like pages Primary stylesheet file for main theme called "StylesheetNew.css" For site theme Secondary stylesheet file to syle the 15 like formatted pages. It is called Labmaster.css Labs.apsx file to use as first of the 15 like pages. Finally screens shots from web developer and browser. Sorry try as I might I could not capture screenshots and put them into this post. The problem is that web developer shows all the area (many lines high) with gray background and with the XXX text that I want to allocate for content in the 15 pages. Yet all the browser show is one line of text o a white background followed by the footer. It looks like the LabStyleSheet works in Web Developer but not in a browser.
I've got an asp.net application (written in vb.net). I have a results page that spits out some calculations. Ineed to write out that output to MS Word. The catch is, this happens within a folder that is secured (only users that are logged in can generate the word document).
Here's what I'm using to gen the document. This works ok when running it locally, but not when loaded to GoDaddy hosting.
[Code]....
My code seems works fine locally. However, after loading it to GoDaddy it only works on a non-secured (not subject to ASP Membership), but when trying to use it in a secured folder the page clocks and eventually closes out.
I am using a dropdown inside gridview with sqldatasource but when iam executing this the output in simple colmun that is not showing dropdown list plz check my aspx code.
I have a listview control bound to an SqlDataSource. As part of the formatting I want to add a title to the data returned from my database. For instance if the data base returns a phone number I want to add 'Tel.' first. However I do not want to diplay this title if the datafield is empty. Here is what I have done so far.
Business is a phone number. If the data field contains a number I get: Tel. 1234 123456. If the field is empty I get Tel. If Business is null I want nothing dsplayed, how do I do this?
I have a url of CCAvenue with only single date for reporting [URL] .....
I need to give my reporting team for an option so that they can get the data of more than one date. i.e. fromdate and todate. To achieve this I am selecting from date and to date and on button click I have written this code
