Just want to know if it is possible to Dynamically Populating a DetailsView with OleDb Data Adapter ? It has to be done on the Page_load because it has to display a users details that i must be able to edit!
View 4 Replies
I want to populate my DetailsView with values from my first page.
This values get with session. I can display this values in my page. But i dont know how can i bring from my North Wind db. Here is my second page code behind in VB. How can i get this all data from my db based this values?
[Code]....
I currently have a page that is used to insert or update records in a DetailsView using an EntityDataSource control. Insert is working perfectly. However, Updating is not. I have the default view set to insert. In PageLoad, I have:
[Code]....
However, the DetailsView always defaults to the first record in the table rather than the record with ID that is equal to the ID querystring parameter. I am not sure how to make it select the correct record. From spending a while researching, it looks like I might need to use a QueryExtender control on the Entity DataSource, but haven't been able to figure out how to configure the QueryExtender correctly.
There is also perhaps some sort of datasource="stuff", databind() that I could toss in there but again.. not really sure how to proceed.
I have a gridview that is populating from a SQL DB and working fine. However, based upon certain data I find in fields in the SQL table, I want to place a 'n' or a 'y' in extra columns in the gridview that I am assuming need to be templatefields. My thought was I could maybe add 8 template columns and then I could put a 'y' in the appropriate column based upon the data I find the table. For the life of me, I cannot figure out how to do this. I want to do this at rowdatabound time ( i think) but I just cannot find out how to, in my code, put that 'y' in the columns. Is this the right way to do this or do I need to do it another way? How do I get that 'y' in the proper column?
View 3 RepliesI have a dropdownlist in EditItemTemplate and InsertItemTemplate which I want it to populate at the runtime while Inserting an item or Editing an item.
I am facing an issue regarding populating a dropdownlist dynamically while in Edit and Insert mode. There are 0 Records in my table and it shows "Empty Data message" in my Listview control. Even the ItemDataBound event does not fire. So I am not able to find the dropdownlist in that listview.
This is my Aspx code which shows only InsertItemTemplate and EditItemTemplate.
[Code]....
I need to create a TemplateField column dynamically , which will contain dropdowlist controls. I've been using this
example to create my first dynamic columns and for the last column, the one that contains dropdowlist controls, I've written this class:
[Code]....
But what I don't know is, where should I populate the dropdownlist control?
I have created DetailsView in designer page with SqlDataSource, Details view is with autoGenerateRows="false" i.e. I have declared my own fields. it is fine there, but what if I want to add these fields dynamically from codebehind with select & edit commands. I want to to use Details View in designer page and want to add fields from codebehind
View 1 RepliesIs it possible to add RequiredFieldValidator in DetailsView dynamically (programatically)?
View 2 RepliesI have a working gridView/DetailsView used as a member Lookup.
Some Fields in the Details View have data only some of the time, and when there isn't any, I want to suppress that row of the detail. No Go.
It seems that some of the function available in other controls don't exist so I cannot make the "field and its "header" Visible = "False"
FWIW, The control is nested inside a loginview control.
[Code]....
When I try and put logiin the control the error I get is:
Error 156 Literal content ('<asp:TemplateField ItemStyle-Wrap="false" HeaderText="PO Box:" Visible="') is not allowed within a 'System.Web.UI.WebControls.DataControlFieldCollection'. C:UsersBillDocumentsMy Web SitesNausetNewcomersMembershipCopy of Lookup.aspx 345
In my Admin page, I have a drop down list containing all current user tables in the database. The user chooses one.
My DetailsView below uses that parameter to populate itself with data from that table. The stored procedure used to select the data passes a string to sp_executesql. The string is concatenated from a select statement and the tablename parameter. Can I do something similar for Update/Delete statements? I'm not sure of the best approach, given that I won't know which/how many fields will be in the DetailsView at runtime, and which of these are keys - the choice of table depends on the user. I think Insert will be straightforward - am I right? I would like to streamline things as far as possible. Is it possible to dynamically pass in the values in, say, a string, and get my stored procedure to understand them? And what's the best method of grabbing the values from the DetailsView in this situation?
I am trying to arrange the information from a SQL record into a 3 column by 3 row table to fit the form presentation that I want. I have placed on the page 3X3 table and then tried to place a detailsview in the first cell for the first picture called P1dv.
I have place a detailsview in the last cell that would control the paging of information called Controldv. I need to fiqure out how to link P1dv paging to Controldv page action. I am using visual web dev. 2005. I am not updating or editing these are read only views.
example of what i need the form output to look like:
picture1 picture2 picture3
name1 name2 name3
Contact1 contact2 contact3
what i ave coded as of now:
[Code]....
I´m trying to link the gridview to detailsview and I used this page as my inspiration:
http://quickstarts.asp.net/QuickStartv20/aspnet/doc/ctrlref/data/detailsview.aspx
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
I have a gridview with a Select button. Clicking the Select button for a particular item, I need its full details displayed in DetailsView. how I can bind to DetailsView? Here is what I have so far.
.aspx
<asp:GridView ID="GridView1" runat="server" AllowSorting="True" AllowPaging="True" PageSize="10" OnPageIndexChanging="countryGrid_PageIndexChanging"
CellPadding="4" ForeColor="#333333" Width="400px" Font-Size="9pt" [code].....
I was having issues with a gridview and CSS so I posted my question here and received a wonderful answer which lead me to implementing CSS Friendly Adapters for all of my gridviews.I have a table nested in the EditItemTemplate that holds the textbox and the button for a calendar control where I want them, it inherits the CSS applied from the CSS Friendly Adapters. I don't want it to change the CSS so I have changed the CSS inline, with no success. More importantly...
I also have a Ajax calendarExtender control to change the date for that field. When the popup is displayed the table in which the calendar is shown in also inherits the CSS Friendly Adapters code. I have tried fixing this by creating a external css sheet for the calendarExtender's cssClass property and a blending of CSS occurs where the items not specified by the Friendly Adapter Code are set correctly by the calendar.css file that I created.Is there anything that I can do to force the tables inside of the gridview to ignore the inherited Friendly Adapter Code?
I have a form that has a textbox, a button and a datagridview. The textbox is a parameter of @subschedule. I'm needing to pass the value of the text box to my sql stored procedure and then fill my datagridview with the results of that query.
I have the following code thus far:
[Code]....
I'm populating a grid view with data from an SQL datasource. The database has a a list of performing artists and lots of details. The gridview initially, shows the ArtisID (Primary key) , and artist name and music style. So far this is all simple and easy. This is done.
Now I want to be able to click on the ArtistId (Select Column) and move the customer to another page where I show indepth details about the artist. How do I do this???
In Vb.net I had a 'Celldoubleclick' event, and I redirect the client. But how do I accomplish the same in asp.net? I already have the primary key value
primekey = datagridview.selecteddatakey.value
or on one sql statement in VS 2008.
How to use two connection strings on one data adapter
i am poupulating data from database which was saved using Rich textbox in vs2003 into a text box in Vs2005.But,i had problems when the data is populated.I am seeing some ascii characters as textbox doesn't know how to present formatted data.
how to populate that formatted data to a textbox?
I am trying to list 3 results per line in a list view. I have done 2 results in 1 line using the itemtemplate and alternatingitemtemplate, but how can I get 3 results to show per line?
View 9 Replieshow can i get a single row from strongly typed dataset table data adapter in c#?
View 2 RepliesSO I have created an object data source on a page from a table adapter using the various Wizards in Visual Studio.
Its meant to query a diary Database by a DateTime parameter called diaryDate. I want to query from a date Now to the next 14 days ahead.
I want to display the entries in a Grid View when the page loads.
So I'm a bit stuck now as to how to set the two query parameters date1 and date2. I want to set date1 = now() and date2 = now() + 14 days.
How do I set those parameters when the page loads ?
Should I have used the adapter Wizard approach of do I have to write all the code in the code behind page ??
This is my datasource code'
[Code]....
This is my query string,
[Code]....
I have a complicate problem. I'm not sure if I can explain it clearly. I have SQL table with columns: id, PartNo, ManuPartNo, GovtPartNum.
My boss want to do like this with 3 dropdown or 1 Dropdown with 2 listbox: If he select any PartNo, it will pull associated value For ManuPartNo & GovtPartNum
Also, if he select any ManuPartNo, it will populate back to other dropdown
Also, if he select any GovtPartNum, it will populate back to other dropdown
I'm so stuck & I don't know where to start on this.
I am in a middle of an windows application in C#, i have used sql server as database. Now the issue is that i am using a crystal report from VS 2005, when i am working with databse expert. The OLEDB Provider list is empty.
View 1 RepliesHere is a snippet of my code...
<ItemTemplate>
<asp:LinkButton
ID="lbEdit"
runat="server"
CommandName="Edit"
>Edit</asp:LinkButton>
<asp:LinkButton
ID="lbNew"
runat="server"
onclick="lbNew_Click"
CommandName="New">New</asp:LinkButton>
</ItemTemplate>
Code behind...
Protected Sub gvPunches_RowEditing(ByVal sender
As
Object,
ByVal e
As System.Web.UI.WebControls.GridViewEditEventArgs)
Handles gvPunches.RowEditing
Dim i
As
Integer = e.NewEditIndex()
Dim ddl
As DropDownList =
CType(gvPunches.Rows(i).FindControl("ddlDiv"), DropDownList)
the question I have is when i enter this procedure in the code behind, ddl is nothing. what am I doing wrong in populating the dropdown for the row I am editing?
I'm using an EditItemTemplate within a datalist, and I'd like to populate all comboboxes with the data that has already been entered whenever it goes into edit mode. I'm simply using this code:
Protected
Sub
DataList1_EditCommand(ByVal
[code]...
