Forms Data Controls :: Listview & Missing Vbcrlf's?
Jul 31, 2010
I had an excel data I converted to an access database. I did some vba to insert vbcrlf's into the excel and re-converted the data to access. It seems as if it did convert over until I printed on screen cell contents into a message box.So, I'm 100% sure my data has the cr & lf's but in my asp.net application's listview control they are not being rendered. I used easyfrom to convert from access to mysql.The application works fine except all the data is clumped together.
I have a ListView, I've setup to use an ObjectDataSource, I've created my Layout and Item templates, and I'm able pull and view a list of my data no problem. However I want to add delete capabilities to my ListView and my reference material tells me to go into the "Configure ListView..." option under the ListView's smart tag, the only problem is I don't have that option, the only three options in my smart tag are "Choose DataSource", "Configure DataSource..." and "Refresh Schema", what am I doing wrong?
Whenever I try to export a ListView with formatting or dynamic content in the PreRender event to an Excel file, I lose all of the changes from the PreRender event. Here's the ListView code:
I've done some reading and found that RenderControl possibly ignores anything in PreRender for a control, but I'm thinking there has to be a way to get those PreRender changes in there before extracting the ListView to Excel.
The only workaround I've found so far is to copy and paste all of my preRender code into the Page_Load, and then everything looks fine in Excel. However, then I have to duplicate my code, as I still need it in the preRender event to display it on the screen properly. I don't want to maintain the code twice.
I am simply trying to change the listView template based on a value in the listview data. I do have this displaying the information correctly. Except when I try to change the item template based on a value in the listview. My code is below ....
I have anested ListView control. I also implemented a jQuery to automatically expand the TextBox control inside of the nested ListView Insert Template. The problem is, when the Textbox expand, the outer ListView control is not; therefore, the Textbox control expands underneath the buttons of the outer listView control. How do I expand the outer ListView control as the nested ListView textbox is automatically expand? One great example is in Facebook where if I add a response comment, it'll automatically push any comments below mine down. If nested Listview control is not the best way to do this, what are my options?
Does anyone have an example for how to create a Dynamically Templated Listview with prefernces page to specify which columns & column order)? Also the listview would also have Edit, delete and insert options if possible. And uses the n-tier approach with Bus Layer and does NOT use LINQ.
Is there any way to enable alternative ListView (LV2) or any other control in case when ListView (LV1) returns no records from DB? I already have emptydatatamplate designed for this case, but I need to enable a new ListView below in this particular case and I don't know how to achieve this!
I try to datbind a listview which is inside another listview InsertItemTemplate.
[Code]....
I'm binding the listivew in the parent listview onitemcreated events. I receive the error Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
I am having trouble finding how to solve the following issue :
I am using nested listviews to display Sales and Sales details.
The main ListView displays General Information about Sales and the child ListView displays the detailed information about one sale. the child listview is shown only when the user clicks on a link (see included code, DataBind is made on PageLoad) :
ASPX Markup Code :
[Code]....
C# Behind Code :
[Code]....
If I removed the datapager part, I can manage show/hide the child list view on the button click event. but if I want to use the DataPager with the PreRender event handling, the child listview is not longer shown on button click.
The form allows a user to create and edit one estimate.
Each estimate can contain multiple Jobs, which are represented in a ListView.
Each Job can contain multiple Parts, which are contained in a ListView that sits in each item of the Jobs ListView.
A user can add and remove as many Jobs as they want.
A user can add and remove as many Parts to/from each Job as they want.
I have no issues adding to each of these, but I do have a problem removing a single part from a single job.
For a reference, here is one Job in the Jobs ListView on the form:
I want to make sure that no matter what a user does, the part of the form they are working on saves what they have. Removing a row from that Parts ListView is no exception. What I want it to do is save the values in each of those textboxes and then delete the necessary row.
Here's what I have in the codebehind:
[Code]....
The EstimateRow variable I create does not get a value from theListView)HFERID.Parent.FindControl("LVEstimateRow") bit of code. There must be another level of nesting that I'm not accessing correctly, because it can't seem to find that nested ListView.
I have a datakey defined on my outermost ListView. When I click on a linkbutton in a row in this listview, the second listview is displayed. This inner listview has several controls and also a linkbutton. When I click this linkbutton, it gets handled by its own event; linkbutton_click. In this event all the data is collected from the innermost listviews' controls, and sends it to the database. The only thing I need within this event is the datakey from the outermost listview.
how to do this when the checkbox in listview layout template check select all checkboxes in listview itemtemplate.I dont give 'Eval 'field to checkbox present in itemtemplate.
I have a listview and a dropdownlist that is pulling from an SQLTable that I am using to insert data into the ListView, which is associated with the SQLTable. For the life of me I cannot figure out how to get this thing to not allow duplicate entries into the listview.
If I could get at the data that is inside the ListView I think my problem would be solved. At the moment all the code I have is to simply find if I can at least get the data down to something I can compare, from that step I will have no problem writing something functional, at least functional for my needs. I really could use a hand with this:
[Code]....
I don't personally have access to the SQLTable, but I can have somebody make changes if this should/needs to be done from that end, but I would rather do it from this end in VB. I've been digging through the MSDN Libraries
I have a method that I created to use the row filter on a dataview. It works fine with a single filter but when I add the AND statement to the end it throughs and execption.
[Code]....
Syntax error: Missing operand before 'And' operator.I spent all day Friday trying to debug this but got nowhere?
In a formview I need to present a new value calucalted by dividing one field value by another. I need to present the result to one decimal place. The code I am using is the following, however it presents the resulting value rounded up or down to the nearest whole value:
I did try and insert refernces to {0:N1} but this just threw asp.net errors. Any advise on how I can guarantee that the value calculated is presented to one decimal place?
so I have 3 series that are created from Cross Table Data Bind. Unfortunately some of the points are missing. Is there an algorithm I can use to cycle through the datapoints for each series and insert empty points to the correct spots so that my data is displayed correctly?
I have a databound TreeView on an aspx content page. I selected the News ImageSet collection for this control. When I render the control locally, the images appear fine. Deployed on the same machine (yes I know I probably shouldn't develop on the server, but it's my server) the images are all broken. I removed the ImageSet attribute and it still rendered with broken links.
The environment is Windows XP SP 3, ASP.NET 4.0. Any reason why the the WebResource.axd would suddenly break outside of the Contoso world?
I've programmatically generated an ASP.NET Table that is then added to a page. There is also a Button on the same page where a user can export the Table data into Excel. Very standard stuff. The data that is displayed on the page is correct but after exporting 10 rows are missing. I've checked encoding. I've compared character input: nothing unusual. Has anyone ran into this before?Here's the export code (see comment at the table...)
I am trying to populate the ListView using LinqDataSource data source but the issue I am having is.I need to load the listview on Search button click action.
IN the page_load I kept like this: =========================================== LinqDS.Selecting += new EventHandler<LinqDataSourceSelectEventArgs>(LinqDS_Selecting);
protected void LinqDS_Selecting(object sender, LinqDataSourceSelectEventArgs e) { e.Result = ObjectDS; } ============================================= This works fine but this happens on page load,i want this binding to happen on button click?is there a way to do this?
So I have a dropdownlist and I'm trying to populate it with values in the database. For some reason, half of the rows has no value. It's happenning in a sequence as well, like the first row has no value, then the second row has value, then the third hasno value....
Im not sure what i could have done wrong here but i created a dataset (ran a query and it returns the correct data) - created my BLL class - bound the ObjectDataSource to the control using the BLL - ran the site and all the data is showing as expected. Now i click edit columns (from DetailsView smart tag) and the selected fields are empty. I refresh the schema and this makes no difference. What could i be doing wrong?
I have a Gridview which is populated from an ObjectDataSource. Data Source has a control parameter hooked up to the SelectedDataKey value of the GridView. My Gridview has rows which may not have a DataKey. I am receiving an error when a GridView row without a DataKey is selected.
