Forms Data Controls :: Listview Not Reading Info From Databound Items On Update

Mar 14, 2011

have an annoying problem. i'm trying to update single items in a databound listview. but when i click the update button it gives me the cannot insert NULL value. it doesnt seem to read anything from the textboxes which i have databound from the database. even though text is clearly shown...

i have setup my update statement and parameters, it uses the Update command name and ItemUpdating event. i catch the data from the textboxes by using e.ItemIndex and use the text assigned to the parameters in a SqlCommand.

The thing i'm aiming for too is that when an item is updated it stays on the page where the item was updated, (i was using response.redirect before but it went against my aim since the whole page reloaded)

View 10 Replies


Similar Messages:

Forms Data Controls :: How To Get The Undisplayed Primary Key Info From A Databound Gridview

Jun 17, 2010

I have two gridviews, where the first is databound to a sql table (but does not display the primary key info), and want to filter the data displayed on the second gridview by using the primary key info from the first gridview table, indicated by the selected row in the first gridview - how I could achieve this? its kind of like using the gridviews as a menu and sub menu display!

View 1 Replies

ListView DataBound Says Items More 0 When Actually Items Less Than 0

Jul 23, 2010

So I have a ListView (assignmentsListView) in an UpdatePanel, being filtered by a DropDownList in the same UpdatePanel. The DropDownList has a list of persons in it and uses autopostback, and the ListView shows the tasks those persons are assigned to.

I am trying to use code similar to this:

[code]....

When I first load the page, the DropDownList shows the first person in the list, and the ListView correctly shows that persons tasks.

If I then select a person who I know has zero tasks, I get an error at the RegisterPostBackControl() method, saying the passed-in control cannot be null.

When debugging, at the RegisterPostBackControl method, it shows that the ListView Items collection has >0 elements in it (the number of elements matches the person selected before the current person).

View 1 Replies

Forms Data Controls :: How To Manipulate Databound Items Out

Feb 8, 2011

I have a simple problem. What i wish to do is to read the data bound item [Code]....

and if the output = 0 then rather than display the 0 I would like to display a message such as Not Available.

Can anyone provide a solution?

View 9 Replies

Forms Data Controls :: Moving Items Between Two Databound Listboxes?

Aug 4, 2010

I have two databound listboxes. I am able to move items between them using add and remove buttons using for loops. However I have no idea how to commit the items back to the db when the user finally clicks on the Save button on the form.

View 5 Replies

Forms Data Controls :: Ddl.items.insert On Databound Inserts Twice?

May 20, 2010

I have a DDL bound to a sqlDataSource, and I want to insert an item in the first position. I tried using this code in the onDatabound event:

Protected Sub ddl_onDataBound(ByVal sender As Object, ByVal e As EventArgs) Handles ddl.DataBound
ddl.Items.Insert(0, "None")
End Sub

But when I load the page, the item "None" is inserted twice at the beginning of the DDL? So I see something like:

None

None

item1

item2

Do I need to put the items.insert somewhere else, like on the pageLoad, to avoid it being executed twice, or am I doing something really wrong?

View 9 Replies

Forms Data Controls :: How To Bold Specific Databound Items In Gridview

Jan 10, 2010

I want to created a messaging system and to display the messages. I want to use a gridview. My problem is how can I display the new messages in BOLD rows and the readed messages in normal text.

View 7 Replies

Forms Data Controls :: Databound Event Is Triggered While There Is No Data In The Listview?

Jan 13, 2010

I have 2 pages (let's say one is a.aspx and the other one is b.aspx). In the b.aspx, there is a nested listview control (let's say outer listview and inner listview).Therefore, there is an event on databound for the outer listview. so basically, the event will programmatically bind the datasource for the inner listview.

Now, in a.aspx there is a button to open a new window (with unique window name) b.aspx. The very first time click on the button, a.aspx opens a new window for b.aspx without triggering the databound event. However, the second click and so on will trigger the databound event which is causing an error because there is no data yet in the outer listview.My question is, what could have possibly triggered the databound event while there is no data in the listview?

View 3 Replies

Forms Data Controls :: Update Items In DataList Without Clicking Update Button?

Jan 26, 2011

I get all hotels with my datalist. a label shows hotel names and a texbox gets order. I want to update values without clicking Submit.

I placed scriptmanager and update panel. I dont know next step

[Code]....

View 4 Replies

Forms Data Controls :: Get The Number Of Items In A Listview?

Jul 5, 2010

How can i get the number of a listview records (or the index of the last record) from within the ItemDataBound event ? I would like to hide one of the controls in the last record, how can i know if the item is the last one ?

View 2 Replies

Forms Data Controls :: Listview Items Backcolor?

Apr 18, 2010

I am looking for a way to set a listviewitem backcolor programaticaly based on a value of a datafield.

View 4 Replies

Forms Data Controls :: Adding A Dropdownlistbox Into Edit & Update Commands On A Databound Gridview?

Sep 30, 2010

I have a datagridview that has a column which displays a ref value from another unbound table, but during an edit of a gridview entry i want a dropdownlistbox to list all the available ref values from the other unbound table source, then to insert the selected value into the bound table

View 1 Replies

Forms Data Controls :: Copying ListView Items To A DataTable?

Oct 28, 2010

Is there a way where I could copy all the asp:ListView ItemTemplate Items into a DataTable?

My ListView Items contain TextBoxes and Labels.

View 5 Replies

Forms Data Controls :: How To Achive The Moving Of Items From One Listview To Another

Feb 1, 2010

I am using 2 listview. One is attached to the datasource and other is not. So in order to show the headers, I filled in the emptydatatemplate.I have a command on the 1st listview "Add", on clicking of which I should remove the item from that listview and add it to the 2nd listview.the datasource of the 1st listview is a stronglytyped list.Kindly help me, how to achive the moving of items from one listview to another and what should be the setting of the 2nd listview to show the headers.

View 1 Replies

Forms Data Controls :: Changing The Items In The Listview At Runtime?

Feb 2, 2010

There is a page in my project named Messages.aspx that shows the messages received [but obviously], using the ListView control.

I want that the user should be able to see the body of the message on the same page [Messages.aspx] just by clicking the subject of the message, which is ofcourse a link.[Messages.aspx?msg_id=some_id]. Hence the user would actually reload the same page to read the contents of the message.

Now what I want is that I should be able to write some code that would change the <LayoutTemplate> and the <ItemTemplate> of the listview during the runtime. [in the page_load event of course]

Previously the listview would look like this:

[Code]....

After the clicks any message to read it and the page gets loaded, I want the layout of the listview to look like this.

[Code]....

View 2 Replies

Forms Data Controls :: Multi Selecting Items In A Listview?

Jul 18, 2010

i have the following problem. i'd like to use a listview with paging for mulitple selection of items in a list. The selection is no problem. I do have f.i. a list which holds the key values.

List<Int64> selectedList =
new
List<Int64>();

As soons as the user makes a selection or removes a selection the list will be updated accordingly. Also hold this list info when changing pages of the listview.

[Code]....

This list can be stored either in a session or a viewstate.

My question is how can i retrieve the information of the list back into my listview and thus displaying the selection the user has made when he jumps from page to page.

Below my listview.

[Code]....

View 2 Replies

VS 2010 / ListView Edit - SqlDataSource - All Items Update

Sep 16, 2011

I'm trying to update items in my SQL database from a ListView. It works, but all entries in the database update. Not just the one I'm working on. I backed up the database prior to testing, so there's not any issues there.This is how my SqlDataSource UPDATE command is setup:

SQL Code:
UPDATE entries SET duration = @duration, checkinDate = @checkinDate, receivedBy = @receivedBy, cosmeticDmgIn = @cosmeticDmgIn, STATUS = N'closed'

I don't have any code setup to update the database, which is probably the issue.When I load the ListView, select edit, type in my edits, and click "Update", all the rows in my database, for that column, are updated with that data.I tried inserting the parameters manually, within the ItemUpdating event, but it never works.

View 5 Replies

Forms Data Controls :: How To Populate Dropdownlist Whit Items In Listview

May 24, 2010

In my project I have a listview which I am binding from code behind. Now I would like to add a droppdownlist for each item in listview. So my question would be:

Is there a way to populate my dropdownlist whit data which I have in a List?

Here is a bit of code to show how my listview looks like:

[Code]....

View 2 Replies

Forms Data Controls :: ListView With Datasource And Later Adding Items Dynamically?

Dec 11, 2010

I have a listview which has a complicated Item template that contains a repeater, an objectdatasource and some other controls. On the first run I am only showing 10 Items of the listview. The user has an option to show 10 more ListView Items. If user clicks on show older items; the listview shall add another 10 items. how to go around this since my list view already has a datasource and I don't want to rebind the whole listview all over again. Instead; I just want to add another 10 items.

View 7 Replies

Forms Data Controls :: VB - Manipulating Data Items In Code Behind And Adding To Listview

Feb 10, 2011

i'm currently learning .Net and i can get data out of a database and display in a listview. But how can i access data items in the code behind and format, change, concatenate...do whatever i want to them then display in the list view? Is it even possible?

[Code]....

Maybe an example of what i'm trying to do would be to concatenate a address from the dataset and in a variable sAddress and then attach sAddress to a label in the list view, or add to colums of the dataset together and then show in a label in the listview.

View 5 Replies

Forms Data Controls :: Highlight Color On Duplicate Items In Listview In Vb2005

May 27, 2010

Highlight color on duplicate items in listview in vb2005

View 1 Replies

Forms Data Controls :: Strategies For Removing Empty List Items From A Listview Upon Render?

Sep 29, 2010

using asp.net 4 and vs 2010 I have a listview that displays data from a database. I have to configure it to display all column data where present, however, not all columns have data, with the result that blank spaces get rendered where this data would normally be displayed.

The code:

[Code]....

So, for example, some of the individuals that exist in this table might no longer be associated with a specific department, institution or have data in the "Address2" column.

View 4 Replies

ASP ListView: How To Access The Data That Is Databound To The Rows

Jun 4, 2010

I want to access the data that was databound to my list view when handling list view events such as:

protected void List_ItemDataBound(object sender, ListViewItemEventArgs e)
or
protected void List_ItemCommand(object sender, ListViewCommandEventArgs e)
Inside the events, I can not access the data via somthing like Eval("ID")
Currently we are using a very hacky solution:
string id = e.Item.FindControl("lblID").Text;
Where lblID is a hidden control that is populated with data in the aspx file using:
<asp:Label ID="lblID" runat="server" Text='<%# Eval("ID") %>' />

My eyes bleed when I look at this, Is there a better way?

View 2 Replies

Forms Data Controls :: Get A ListView To Automatically Update Itself?

Sep 6, 2010

I have a web page into which a user control is loaded. This user control contains a ListView. In the Page_Load event handler of the user control I have this code:

listView1.DataSource = TaskList; // Note: "TaskList" is a data table
listView1.DataBind();

It should be noted that the TaskList data table is actually instantiated in the web page. The user control then obtains a reference to it.

Everything described to this point works fine. Where I'm running into trouble is when I add a new row to TaskList. I had *thought* that the ListView control was dynamically connected to the data table, such that when I altered the contents of the data table in any way, that the changes would be automatically reflected in the ListView.

View 2 Replies

Data Controls :: Delete CheckBox Checked Selected Items In ListView?

May 7, 2015

Here i want Do project with Angular js..

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved