Forms Data Controls :: Propopulating A Databound Textbox In DetailsView?
Mar 10, 2011
How Do I prepopulate A databound textbox in detailsview. When I place my text in the textbox the error says "Cannot enter 'description' into database insert fails.
The problem is that BindHeaders is called multiple times. I was expecting it to fire only once since a very similar code I used to customize the GridView control to use our mapping utility on the headers works this way.
I have a detailsview with three textboxes as itemtemplates. Each for holding a different date. To avoid the option of users entering invalid values the textboxes are disabled and the user can use a calender control to fill the dates. Because the textboxes are disabled I added a linkbutton to empty a date, if the user decides to clear it.
Asp:
[Code].... In the code behind is the following for linkbutton on click:
[Code]....
Now, the problem is that no matter which linkbutton a user clicks all three textboxes are cleared/emptied. Why?
I've been playing with a certain detailsview for most of last week. This particular control is located within a panel that is hidden until a user clicks a linkbutton on a gridview. Then the panel's visible property is set to true and the detailsview is populated based on the commandargument passed through the link button. What I've discovered is that with each postback, the datakey or control parameter, still not sure which or if both, is lost. I've discovered a lot about ViewState and how controls work and am a bit surprised that something as common as using a detailsview within a gridview wouldn't be handled better than it is now. I have been able to get the proper information to build a correct select statement when the user decides to edit a record. I am now working on an update statement, but for some reason while I have the right key to update the right record, I am unable to access the user-generated data that was entered in the details view.
For instance, I select record with ID of 1 in the gridview. It pulls up the detailsview and I can view it. I then click edit. The correct record is still there. (It was previously going to default). When I enter new text in a textbox and click update, the app still knows I am working with record #1 but doesn't seem to be able to find the textbox control. I have currently hard-coded a value into the field just to see if I could actually get the record to update and it did. I am using an OnInit to cause the sub to run and think this might be the problem. However, I have been unable to find a better way around this.
Here is the sub that executes on the OnInit() of the detailsview:
Protected Sub notes_binding() If notesDetail.CurrentMode = DetailsViewMode.Edit Then sqlNotesUpdate.UpdateCommand = "UPDATE [Oilchange_Notes] SET [notes] = '" & CType(notesDetail.FindControl("notes"), Textbox).Text & "' WHERE [vehicle_id] = " & Session("unitNumVal") sqlNotesUpdate.UpdateCommandType = SqlDataSourceCommandType.Text sqlNotesUpdate.Update() End If sqlNotesUpdate.SelectCommand = "SELECT * FROM [Oilchange_Notes] WHERE ([vehicle_id] = " & Session("unitNumVal") & ")" End Sub
And this is the error I get: Object reference not set to an instance of an object. If I'm correct about why it's not pulling the actual value or even acknowledging the control exists and is actually 'notes' (it is), then at would point would be the best to place this code?
I have a DetailsView control where I use templatefields. One of them are textcontrol tempatefield and dropdownlist templatefield.
What I want to so is, when I select let's say "Dollar" value in DropDown list, textcontrol text to be assigned "USD". Basically, text property of textcontrol to be asggined based on dropdownlist selected value.
I am trying to use something like this but it gives me an error:
I guess I'm not sure exactly how or where to do what I need.
First off - here's what I need - - when the user clicks on the NEW button in the detailsView, I have the User.Identity.name captured in a variable and I need to set one of the textboxes (InsertItemTemplate) named 'txtNew' to that name.
I've tried using the ModeChanging (and ModeChanged) event: Dim dv As TextBox = CType(DetailsView1.FindControl("txtNew"), TextBox) If (e.NewMode = DetailsViewMode.Insert) Then ....
However, no matter what, 'dv' always shows as 'Nothing', so I can't change the text of it.
I have a bound field in a DetailsView that I want updated with the contents of TextBox2.Text when I update. I have TextBox2 set AutoPostBack True. Cannot remember how to move the contents on update. I tried converting the "Description_Update" to a template field without success.
I can copy and paste the contents of TextBox2 into the DetailsView and it does update as do the other DataFields.
The DetailsView getting data filtered by a QueryStringField. Both my Gried and details view showing only one row. I want to get the value in 3 column "Illustrasjon" into Texbox4.
<asp:AccessDataSource ID="AccessDataSource2" runat="server" DataFile="~/App_Data/Oppgave.mdb" SelectCommand="SELECT [TekstID], [ElevID], [Illustrasjon] FROM [tblTekstGitt] WHERE ([TekstID] = ?)">.......
im using visual studio 2008, c#, asp.net, sqlserver to develop website. my problem is i want to change textbox control in detailsview when editing and inserting to other controls such as dropdownlist or radio button. is there any possible way to do it? i've try using edit item template, its work only to change it to other control but not working to bind it to database.
I'm tyring to write a simple DetailsView only used for inserting new records that will pre-fill a textbox with a query string value. Here's the DetailsView:
[code]....
All I want to do is set VenueID_FK.Text to = the "VenueID" querry string. I also want the user to be able to see the VenueID number as they are filling out GridView1.
I know this is probably a simple thing, but I am very new to asp.net. I thought I could handle this in the page load event, but when I try something like this
And then follow by setting the Text property programitically. I've accomplished something similar to this on a different page using a FormView, but only for ReadOnly mode and it was handled in the databound event on that page.
I get the error "The name 'DetailsView1' doesn't exist in the current context." when trying to do the above mentioned. When trying the same line in the databound event here, I get the same error.
they could provide with regards having a word count of a mulitline textbox that is found within a DetailsView? I have tried using JavaScipt and a this [URL] but I don't seem to be able to get it working within that DetailsView,
This is probably something very simple that I've over looked, but I have a template field in a details view. In the field there is a html <p> tag that is bound to a database field. The database field is set to nvarchar(max) and will usually be very long. When the text is loaded into the <p> tag, it is not wrapped and does not go onto a new line when it reaches the edge of the screen.
I have an ASP.Net detailsview control. Its DataSourceId varies and I set it in Page_load accordingly... (based on LLBLgen sub types, but this is not too important)I guess this is a page lifecycle leaky abstraction I am not "getting".The problem is that I bind to fields that may or may no be there depending on the datasource...To "disable" a bound field under certain conditions I've tried wrapping the bound field in a panel which I set to visible or invisible in code-behind, but I still get the following error:Sys.WebForms.PageRequestManagerServerErrorException: DataBinding: Entity does not contain a property with the name 'FilePrefix'.I change the detaislview.datasourceid in pageload...might be too late in lifecycle.I don't want to bind to that field, as it doesn't exist for the new datasource, but it tries to do so none-the-less and I get the error.[Edited]: Code as requested...ASP, detailsview bound column:
I am trying to arrange the information from a SQL record into a 3 column by 3 row table to fit the form presentation that I want. I have placed on the page 3X3 table and then tried to place a detailsview in the first cell for the first picture called P1dv.
I have place a detailsview in the last cell that would control the paging of information called Controldv. I need to fiqure out how to link P1dv paging to Controldv page action. I am using visual web dev. 2005. I am not updating or editing these are read only views.
example of what i need the form output to look like:
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
I have a gridview with a Select button. Clicking the Select button for a particular item, I need its full details displayed in DetailsView. how I can bind to DetailsView? Here is what I have so far.
Let's say I have DropDownList ddlRooms bound to the datasource which returns list of available rooms from table tblRooms. On the other hand I have users, and their info is stored in table tblUsers. Using FormView frmUsers can be inserted, edited and updated... frmUsers is be bound to separate datasource. To each user, I would ilke to assign a room, so the value of txtUserRoom will be populated based on the selected value from ddlRooms. How can i pass the selected value of ddlRooms to txtUserRoom while keeping txtUserRoom stil bound to user datasource? Do I need two separate fileds or can i just put value of ddlRooms into datasource user?
The amount of li elements that will be rendered into each ul is determined at runtime. Each link in a li belongs to into a specific ul (the one containing a specific caption. Imagine this as a kind of a treeview with nodes and subnodes) During the bind Event I need access to an ASP:HyperLink that will be rendered into the a-element. Which databound ASP.Net control should I pick for this? Looks like a repeater in a repeater, which should make the databinding process ugly. I'm thinking about creating this HTML-Output with StringWriters myself.
i already have a DataList, and i get any information from the rows i need by adding code such as:
[code]....
Well what i am doing there is using the values from the items that the DataList has obtained from the rows, now, what i need to do is EXACTLY the same, but for the FormView, i realised that this code does not work for the FormView, but only DataList control.
give me the code for doing exactly as shown, but for the FormView control.