im using visual studio 2008, c#, asp.net, sqlserver to develop website. my problem is i want to change textbox control in detailsview when editing and inserting to other controls such as dropdownlist or radio button. is there any possible way to do it? i've try using edit item template, its work only to change it to other control but not working to bind it to database.
View 7 Repliesi have a detailsview with a dropdownlist. i would like to be able to select a value from this dropdownlist and depending on the selectedvalue display a specific control/header in another column.
View 9 RepliesI can't seem to reference a control properly, so that I could then change its properties. I have 3 fckeditor controls specified in edittemplate fields, but i only want to diplay them all if the querystring equals 1. so i created in aspx.cs file: {
View 4 RepliesI have a DetailsView control where I use templatefields. One of them are textcontrol tempatefield and dropdownlist templatefield.
What I want to so is, when I select let's say "Dollar" value in DropDown list, textcontrol text to be assigned "USD". Basically, text property of textcontrol to be asggined based on dropdownlist selected value.
I am trying to use something like this but it gives me an error:
[Code]....
i want to find a control (TextBox) in Detailsview using javascript
View 2 RepliesI have a webform with a DetailsView control. In the DetailsView, I would like to update the headertext (showing field names) to a "friendly name"
I also have a cross-reference table which has a field name with a matching friendly name.
Is there some code to get my DetailsView control to look up the field name, and then display the friendly name on my form.
I'm trying change mode in DetailsView but my program haven't running.
My code:
protected
void DetailsView1_ItemInserting(object sender,
DetailsViewInsertEventArgs e)
{
if(....)
{.........
I'm looking to find some command or control that will change fields in a detailsview insert a 0 if there was no data inserted into them. Some example code from my boundfield is:
<asp:BoundField DataField="Assignment_Travel_Time"
I am trying to handle the detailsview programmatically but I don't know what I am doing wrong. My details view control isn't going into edit mode. My code for my gridview's select button properly loads the data into the detailsview but once the detailsview renders clicking on "Edit" doesn't switch the detailsview contol into edit mode.
This code draws the information from my database and loads the information into the dataview:
[Code]....
This code is in my dvTeamDetails_ItemCommand sub and the beep works:
[Code]....
This code handles my mode changing event:
[Code]....
Here is some of the HTML code:
[Code]....
i'm beginning with a little question. So i have this scenario
[Code]....
So i have a Linq object named TCategory. When the user wants to edit this object he will have 2 fields id and categoryName and when he press update the UpdateCategory function will receive an already made object of TCategory type storing the data user has typed. The problem is that i also want to let the client to change the id of the object so i need to pass to the function the actual Id and the TCategory object. How can i do this?
[Code]....
Very new to VS2010
I've got data in a DetailsView control which shows the data and expands the rows to suit the content.
However, when I click to edit the information, the editing area changes to just a few characters wide.
How do I change the size of the editing area to match the view data state?
I am trying to highlight a cell in a DetailsView if the value displayed is either "Desktop Computer" or "Laptop Computer" say red, I seem to be able to find examples for gridview but I don't seem to be able to apply this to a DetailsView.
View 4 RepliesHow Do I prepopulate A databound textbox in detailsview. When I place my text in the textbox the error says "Cannot enter 'description' into database insert fails.
View 1 RepliesI have a detailsview with three textboxes as itemtemplates. Each for holding a different date. To avoid the option of users entering invalid values the textboxes are disabled and the user can use a calender control to fill the dates. Because the textboxes are disabled I added a linkbutton to empty a date, if the user decides to clear it.
Asp:
[Code]....
In the code behind is the following for linkbutton on click:
[Code]....
Now, the problem is that no matter which linkbutton a user clicks all three textboxes are cleared/emptied. Why?
I have a detailsview with editautogenerate. When I click "edit" to update the related row; showed up textboxes way narrow around 100px width.
My question:
Is it possible to enlarge edit mode textboxe size. I could not find in dietailsview proporties/editrowstyle sections...
I've been playing with a certain detailsview for most of last week. This particular control is located within a panel that is hidden until a user clicks a linkbutton on a gridview. Then the panel's visible property is set to true and the detailsview is populated based on the commandargument passed through the link button. What I've discovered is that with each postback, the datakey or control parameter, still not sure which or if both, is lost. I've discovered a lot about ViewState and how controls work and am a bit surprised that something as common as using a detailsview within a gridview wouldn't be handled better than it is now. I have been able to get the proper information to build a correct select statement when the user decides to edit a record. I am now working on an update statement, but for some reason while I have the right key to update the right record, I am unable to access the user-generated data that was entered in the details view.
For instance, I select record with ID of 1 in the gridview. It pulls up the detailsview and I can view it. I then click edit. The correct record is still there. (It was previously going to default). When I enter new text in a textbox and click update, the app still knows I am working with record #1 but doesn't seem to be able to find the textbox control. I have currently hard-coded a value into the field just to see if I could actually get the record to update and it did. I am using an OnInit to cause the sub to run and think this might be the problem. However, I have been unable to find a better way around this.
Here is the sub that executes on the OnInit() of the detailsview:
Protected Sub notes_binding()
If notesDetail.CurrentMode = DetailsViewMode.Edit Then
sqlNotesUpdate.UpdateCommand = "UPDATE [Oilchange_Notes] SET [notes] = '" & CType(notesDetail.FindControl("notes"), Textbox).Text & "' WHERE [vehicle_id] = " & Session("unitNumVal")
sqlNotesUpdate.UpdateCommandType = SqlDataSourceCommandType.Text
sqlNotesUpdate.Update()
End If
sqlNotesUpdate.SelectCommand = "SELECT * FROM [Oilchange_Notes] WHERE ([vehicle_id] = " & Session("unitNumVal") & ")"
End Sub
And this is the error I get: Object reference not set to an instance of an object. If I'm correct about why it's not pulling the actual value or even acknowledging the control exists and is actually 'notes' (it is), then at would point would be the best to place this code?
I guess I'm not sure exactly how or where to do what I need.
First off - here's what I need - - when the user clicks on the NEW button in the detailsView, I have the User.Identity.name captured in a variable and I need to set one of the textboxes (InsertItemTemplate) named 'txtNew' to that name.
I've tried using the ModeChanging (and ModeChanged) event:
Dim
dv As
TextBox =
CType(DetailsView1.FindControl("txtNew"),
TextBox)
If (e.NewMode =
DetailsViewMode.Insert)
Then ....
However, no matter what, 'dv' always shows as 'Nothing', so I can't change the text of it.
Where do I put the logic and what am I missing?
I have a bound field in a DetailsView that I want updated with the contents of TextBox2.Text when I update. I have TextBox2 set AutoPostBack True. Cannot remember how to move the contents on update. I tried converting the "Description_Update" to a template field without success.
I can copy and paste the contents of TextBox2 into the DetailsView and it does update as do the other DataFields.
<asp:TextBox
ID="TextBox2"
runat="server"
Height="80px"
TextMode="MultiLine" Width="360px"
Font-Size="Small"
MaxLength="120"
Text=""
Font-Names="Calibri" AutoPostBack="True"></asp:TextBox>
<asp:BoundField
DataField="Description_Update"
HeaderText="Descrip"
SortExpression="Description_Update"
/>
Do I need to use adn Eval or DataBind function or both. I have triued several combinations and do nothing but continue to butcher the database tables.
I am trying to update a textbox with the current days date when a checkbox field is checked during Edit of detailsview
The current script I have is which gives me a : Object reference not set to an instance of an object on line 3
[Code]....
Duplicate Data in Gridview and Updating textbox in DetailsView
View 2 RepliesI am using a DetailsView control. I am trying to disable some bound controls programmatically.
e.g. The DetailsView control is displaying the member details.
What I am trying to accomplish is that:
- if the member is active, then the deceased date textbox field should be disabled
- if the memberstatus is changed from Active to Deceased, then the deceased date textbox field should be enabled
I'm tyring to write a simple DetailsView only used for inserting new records that will pre-fill a textbox with a query string value. Here's the DetailsView:
[code]....
All I want to do is set VenueID_FK.Text to = the "VenueID" querry string. I also want the user to be able to see the VenueID number as they are filling out GridView1.
I know this is probably a simple thing, but I am very new to asp.net. I thought I could handle this in the page load event, but when I try something like this
TextBox VenueID_FK = (TextBox)DetailsView1.FindControl("VenueID_FK");
And then follow by setting the Text property programitically. I've accomplished something similar to this on a different page using a FormView, but only for ReadOnly mode and it was handled in the databound event on that page.
I get the error "The name 'DetailsView1' doesn't exist in the current context." when trying to do the above mentioned. When trying the same line in the databound event here, I get the same error.
they could provide with regards having a word count of a mulitline textbox that is found within a DetailsView? I have tried using JavaScipt and a this [URL] but I don't seem to be able to get it working within that DetailsView,
View 2 RepliesThe DetailsView getting data filtered by a QueryStringField. Both my Gried and details view showing only one row. I want to get the value in 3 column "Illustrasjon" into Texbox4.
<asp:AccessDataSource
ID="AccessDataSource2"
runat="server"
DataFile="~/App_Data/Oppgave.mdb"
SelectCommand="SELECT
[TekstID], [ElevID], [Illustrasjon] FROM [tblTekstGitt] WHERE ([TekstID] = ?)">.......
I've got a dropdownlist control that the user can select an an employee name and that should then fill in the detailsview control with specific information about that employee.
My dropdownlist control works fine and I do have AutoPostBack set to true. For some reason my detailsview doesn't work. There's no error message. The detailsview control just doesn't show up.
Here's my code:
This is the sqldatasource control for the dropdownlist control:
[Code]....
This is the sqldatasource control for the detailsview control:
[Code]....
Dropdownlist control:
[Code]....
Detailsview control:
[Code]....