I am trying to update record via stored procedure, but i got error at very start point. Problem is when i click on Edit link button within the Gridview it produce error.
I can populate values from database fine but its produce error when i click on edit link button. see the code below.
[Code]....
[Code]....
[Code]....
After this and in the same procedure i want to update the inserted or the updated record which occared in the above code with the follwing update statment :
[Code]....
updating mark is completed successfully if the record is existed (Update Case) but if the record does not exist (new record) ... the update of the mark is not occured ..
I'm getting problems to update a database table shown in a gridview using a stored procedure.
My table has 3 columns and my stored procedure is something like:
spUpdateMyTable(@column1 varchar(20), @column2 varchar(50), @id_table integer)
as
update mytable set column1 = @column1, column2 = @column2 where id_table = @id_table
The stored procedure works perfect when I try to execute it in the SQLServer query analizer, but my problem is when I call the sqldatasource update command.
When I do that, it seem that there are problems whith the parameter's names...
I'm doing that whit updateparameters.Add(parameter) and parameter is created whit the same name, tipe and the value that Is shown in the gridView.
I'm looking for in the msdn but everything I founded was about doing that through an update query but I need the stored procedure.
I would like to ask a question on the visual basic codes to loop the gridview to retrieve the values and based on the values, it will be provided as parameters to update to the database table using stored procedure.
Firstly, I have a gridview named grvProduct. The page (ui) will be loaded with data from the database with the use of stored procedures. And only certain values can be edited through the use of template in gridview. So based on those edited values, I'm supposed to pass these values as parameters to the stored procedure which will then update a database table.
Let say, I have 3 records retrieved from the database and displayed in the gridview. And I would like to edit a values in the 3 records, how do I do batch update and pass those parameters to the stored procedure? I went to debug and step through the visual basic codes and realised there were too many arguments specified because I actually loop the gridview.
Below is my visual basic codes:
[Code]....
Below is my Stored Procedure code:
[Code]....
I believe it is the error in the looping of the gridview which results that I could not batch update the data/values.
I have a page, let's called that Parameter page, displaying data from a database table using GridView. (The database is a SQL database.) I allow editing of data in GridView. The GridView uses stored procedure to retrieve data and to update data. In my project, users need to log in before using my asp.net project. So at every page, I know who the current user is by using HttpContext.Current.User.Identity.Name. Now as requirement changes, I need to record who has changed what (row) in the Parameter page. The information is to be written to a new table - audit log. Therefore I do not expect to change the Parameter table structure.
I have modified the stored procedure retrieving data. It returns one more column - an empty column with name currentUser. So GridView will create one more column. After data bound, I have the GridView_DataBound() to popluate that column using HttpContext.Current.User.Identity.Name.
I debug it in Visual Studio and am able to see the name of current log in user as the last column in GridView. I change the update stored procedure to take in one more parameter. That parameter, currentUser, takes default value. The default value is an empty string. So if UI part fails to send in the current user name to stored procedure, it just write the empty string as the user name. I change the <asp:SqlDataSource>. I add a <asp:Parameter> for currentUser.
[Code]....
I debug in Visual Studio. However when I save the change, the SQL profiler shows UI sends in @currentUser as NULL. Why?
Girdview has dropdownlist TemplateField called ddlSate, how to bind state field value in sql table to selected value of ddlState dropdownlist control? For example the sql table has AL value for state field, (Note by default ddlState lists all states options with sqldatasource), how AL is selected in ddlState when binding to ddlState?
Secondly, when user selects different state like GA, how below update stored precedure works? that means how to find ddl selected value in update procedure as shown below question mark line:
Here is part code:
<asp:GridView ID="gvOrder" runat="server" DataSourceID="ods1" AutoGenerateColumns="False"
style="margin-top: 11px" CssClass="pnlOrdercss" ScrollBars="Both"
BorderColor="Black" BorderWidth="1px">
<Columns>
[Code]....
I have a SQL table containing a timestamp column. This table is displayed in ASP using GridView control. The timestamp column is indicated in the DataKeyNames property of the GridView. I'm using TemplateFields for all columns and a ItemTemplate HiddenField control connected to the timestamp column using Eval.
<asp:TemplateField
ItemStyle-Wrap="false"
Visible="false"
HeaderText="timestamp"
SortExpression="timestamp">
<ItemTemplate>
<asp:HiddenField
ID="gv_hid_timestamp"
runat="server"
Value='<%#
Eval("timestamp") %>'
></asp:HiddenField>
</ItemTemplate>
</asp:TemplateField>
The data is displayed properly. I'm trying implement the optimistic concurrency in C# using the value of above mentioned timestamp and a stored procedure. The SQL stored procedure expects the @timestamp as varbinary(8). I'm not sure how to pass the value of gv_hid_timestamp back to the stored procedure. I'm using the following:
command.Parameters.Add("@timestamp", SqlDbType.Binary).Value = Byte.Parse(((HiddenField)gv.Rows[row].FindControl("gv_hid_timestamp")).Value);
resulting in the following error: "Input string was not in correct format." (I also tried different data types but with similar result). I want to be able to pass this parameter programmatically from C# and not have to specify it on the UpdateParameters list.
I have an app where i have a GridView connected to a DropdownList....The selectedIndexChange determines what the gridview shows. Then have coded in the row editing event the ability to change the information in the row. MY ISSUE- cant take the new information changed in the row and update it in the database. I have a row updating event that im trying to figure out how to attach it to my stored proc and the newly edited row
View 12 Repliesi have bind griview dataSource with Store procedure having join of 3 table how can i update this gridview data using stored procedure?
View 5 RepliesI have the following stored procedure:
ALTER PROCEDURE Pro_members_Insert
@id int outPut,
@LoginName nvarchar(50),
@Password nvarchar(15),
@FirstName nvarchar(100),
@LastName nvarchar(100),
@signupDate smalldatetime,
@Company nvarchar(100),
@Phone nvarchar(50),
@Email nvarchar(150),
@Address nvarchar(255),
@PostalCode nvarchar(10),
@State_Province nvarchar(100),
@City nvarchar(50),
@countryCode nvarchar(4),
@active bit,
@activationCode nvarchar(50)
AS
declare @usName as varchar(50)
set @usName=''
select @usName=isnull(LoginName,'') from members where LoginName=@LoginName
if @usName <> ''
begin
set @ID=-3
RAISERROR('User Already exist.', 16, 1)
return
end
set @usName=''
select @usName=isnull(email,'') from members where Email=@Email
if @usName <> ''
begin
set @ID=-4
RAISERROR('Email Already exist.', 16, 1)
return
end
declare @MemID as int
select @memID=isnull(max(ID),0)+1 from members
INSERT INTO members (................................
When I run this page, signup.aspx, provide required fields and click submit, the page simply reloads and the database table does not reflect the newly-inserted record. How do I catch the error messages that might be returned from the sproc? how to change signup.aspx so that the insert occurs.
along with a gridview update file that I store in my database
View 1 Replieshere I am binding two dropdownlist and featching some value from database through stored procedure
below is my sp
ALTER PROCEDURE [dbo].[Get_OpenCostCode]
-- Add the parameters for the stored procedure here
(@UserId NVARCHAR(50)) [Code]....
and here is the .cs code
[Code]....]
but wen i run this shows error,There is already an open DataReader associated with this Command which must be closed first.
I also put in my connectionstring tag in webconfig file MultipleActiveResultSets=true;
I have one problem with stored procedure.
My table:
tbl_payments
UserId
PaymentId
PaymentType
Stored procedure:
ALTER PROCEDURE dbo.Select_Customer
@PaymentId varchar(100)
/*
(
@parameter1 int = 5, [code]....
i need an example of a paging gridview using stored procedure.
i tried finding on the web and i can't find exactly what i need.
[Code]....
[Code]....
I'm pretty new at web programming but a lot of years as a client-server dev.
I'm populating a gridview from a stored procedure, but I don't want to actually execute the populate till I have all the values filled in the page. (some are static textboxes, a calendar (date) value and some drop-downs that are populated earlier) I see there's nothing like gridview1.show() like there is in c# windows form programming. I tried
[Code]....
[Code]....
I created two stored procedures in SQL Server Management Studio.
First procedure add field in ProjcetsToUsers table (for many-to-many associations)
[code]....
I can delete the user from the project and then add another, and the new one is added but removed the remains.
As for data base both this function work correctly.
I am trying to use a stored procedure to insert new records from aspx page. I have created an stored procedure for that and it works fine but I want to display an error message when record exist. It does not display any error message however it does not insert when record exist. How can I display an error message when record exist flag in stored procedure -
[Code]....
I want to update two tables using stored procedures but my data not updating to data base
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlClient;
namespace INV_DN
{
public partial class Form1 : Form
{
SqlConnection con;
SqlDataAdapter da1;
SqlCommand cmd;
// SqlCommandBuilder cb;
DataSet ds;
public Form1()
[Code].....
I have a stored procedure that returns a dataset with a different number of columns and different column names depending on user input. How can I use this with a GridView? Normally I define the columns beforehand in a static fashion, but, have never done a dynamic dataset like this.
View 1 RepliesIm loading some results from a SQL Stored procedure into a Grid View. From my stored procedure I simply get 2 columns returned, Details and Savings, the savings are being returned in the format 30.50123 I want to limit this to 2 decimal places and put a euro sign in front of it like so €30.50, I have managed to do this however its adding a new "savings"column to my Grid view which I obviously don't want. So I now have a savings column with the correct format of €30.50 and my 2 columns from my stored procedure
details and savings. Heres my code....
[Code]...
how to call a stored procedure and to display it in a grid view table..
View 3 RepliesI need to be able to delete records from a gridview using a stored procedure. My data comes from two sources so the standard delete won't work. I have come up with the code below which deletes a record, but the wrong one. How can I iterate through the rows to delete the row I actually want to delete.
[Code]....
I am using two SQL Data Adapters to initially populate a gridview and then repopulate from search results. The Search SQL Data Source uses a stored procedure to retrieve the results but I cannot get the updated gridview to display.Here is my aspx code:
[Code]....
Here is my CS code:
[Code]....
I cannot get the gridview to display after I click the Search button.
I am trying to show gridview as Stored procedure results sent.
[code]....
page is displaying with Edit and deleti buttons with no. of rows. But not result set (no data).