At the moment I have a detailsview which displays read only data and I have a button also. What I want to achieve is a situation where a user can click a button which will convert that specific piece of data inside a detailsview into a pdf document.
View 7 RepliesI have got a detailsview in my webpage that inserts an item into a database when I click the insert button.
Once this button is clicked, the detailsview dissapears. Why it does this I don't know.
Some of my code:
[Code]....
I have a web form with a detailsview controlled by a linkbutton in a gridview. When the user clicks the linkbutton, a panel appears with the detailsview inside it. The select statement is created based on the commandargument of the link button. So far, if there is a record associated with the ID passed through the linkbutton, the detailsview displays correctly. However, if the user needs to update this, it jumps to the default record for that detailsview after clicking the standard update link. Without a default ID set, the detailsview does not display at all, as some IDs do not yet have a corresponding record for the detailsview.
How can I get around this issue? Also - is there a way to immediately display an open detailsview for IDs with no record associated yet?
I´m trying to link the gridview to detailsview and I used this page as my inspiration:
http://quickstarts.asp.net/QuickStartv20/aspnet/doc/ctrlref/data/detailsview.aspx
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
How to assign MaxLength Property to BoundField column in DetailsView COntrol without Converting into TemplateField.
View 3 RepliesI want to making another dropdownlist visible=false when clicking in dropdownlist on the same detailsview?
View 4 RepliesI have a panel, panel is a button and listbox, when the user clicks the button it should fire but it doesn't. Why would this be?
View 4 Replies[Code]....
If I want to get the ID by clicking on the Button does not work.
Even if the change: (Button).
How do I change the code to obtain ID in Button1?
I am trying to edit data using checkbox value. Firstly, I created popup window which using querystring some data from main page. In popup window, I want to change the checkbox value. For example, I made setSpare column and given the value to show bit data type such as 0 or 1 using checkbox(false or true). If some data has non setSpare(means 0), it wil lbe come out uncheckbox. If I want to check it and clicking submit button, It was not change. I am going to show the code below.
public partial class AddSpare : BasePage
{
string ObjectId;
protected void Page_Load(object sender, EventArgs e)
{
ObjectId = Request.QueryString["ObjectId"];
displayComInfo(ObjectId);
}
protected void displayComInfo(string ObjectId) // it informed relative data on web through using DB.
{
string query = "usp_ShowComputerList";
try
{
using (SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["SCSConnectionString2"].ConnectionString))
{
SqlCommand cmd = new SqlCommand(query, conn);
cmd.CommandType = System.Data.CommandType.StoredProcedure;
SqlParameter paramobjectId = cmd.Parameters.Add("@ObjectId", System.Data.SqlDbType.Int);
paramobjectId.Value = ObjectId;
conn.Open();
SqlDataReader dr = cmd.ExecuteReader();
if (dr.Read())
{
ModelTxt.Text = dr["Model"].ToString();
ModelTxt.ReadOnly = true;
ComputerTxt.Text = dr["ComputerName"].ToString();
ComputerTxt.ReadOnly = true;
userTxt.Text = dr["UserName"].ToString();
userTxt.ReadOnly = true;
ntTxt.Text = dr["NtLogon"].ToString();
ntTxt.ReadOnly = true;
HDDTxt.Text = dr["HddSize"].ToString() + "GB";
HDDTxt.ReadOnly = true;
RAMTxt.Text = dr["MemorySize"].ToString() + "GB";
RAMTxt.ReadOnly = true;
SerialNoTxt.Text = dr["SerialNo"].ToString();
SerialNoTxt.ReadOnly = true;
TextBox1.Text = dr["Spare"].ToString();
inputChkSpare.Checked = (bool)dr["Spare"]; //(bool)dr["Spare"] display false or true.
dr.Close();
}
}
}
catch (Exception ex)
{
MessagePanel1.Type = MessageType.Error;
MessagePanel1.Text = MessagePanel1.Text = "This is an error." + ex.Message;
}
}
protected void okBtn_Click(object sender, EventArgs e)
{
string query = "usp_SetSpare";
try
{
using (SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["SCSConnectionString2"].ConnectionString))
{
SqlCommand cmd = new SqlCommand(query, conn);
cmd.CommandType = System.Data.CommandType.StoredProcedure;
SqlParameter paramobjectId = cmd.Parameters.Add("@objId", System.Data.SqlDbType.Int);
SqlParameter paramspare = cmd.Parameters.Add("@spare", System.Data.SqlDbType.Char);
paramobjectId.Value = ObjectId;
if (inputChkSpare.Checked == true) // if I change the check box, it does not bring the changed value. It will bring the above value(already displayed thing)
{
paramspare.Value = "1";
}
else {
paramspare.Value = "0";
}
conn.Open();
cmd.ExecuteNonQuery();
cancelBtn.Value = "Close";
okBtn.Enabled = false;
MessagePanel1.Type = MessageType.Information;
MessagePanel1.Text = "This computer is spare from now.";
}
}
catch (Exception ex)
{
MessagePanel1.Type = MessageType.Error;
MessagePanel1.Text = MessagePanel1.Text = "This is an error." + ex.Message;
}
}
I trying this solution in visual basic but it dosent work, im getting a error:
RegisterForEventValidation can only be called during Render();
In the line:Dim script As String = Me.ClientScript.GetPostBackClientHyperlink(btn, "", True)
[Code]....
I created a grid and successfully done update, delete, filled functionality.
But whenever I m clicking on Gridview row, its hieght get increased and color of the row become red while clicking on edit button. But this problem is occuring in Mozilla,IE7 not in IE6. Project is running good in IE6. What could be the solution for this.
I have a button called Next outside the GridView. If I click on Next, I want to highlite the 2nd row and display the details of the 2nd row below in panel. If again I click on Nextm i want to highlite 3rd row and want to display 3rd row results in a panel
View 8 RepliesIs there any way to stop Gridview to turn back to first row when user click edit link button. Say there are 50 rows in gridview, user scrolled down to 45th row then click edit button. Gridview shifted to editmode but user need to roll down back again to reach the row 45th.
View 1 Replies I want to click a new record button and my modal pop up pop up and my DetailsView is inside it. The reason I want to do this is so I don't have load it on page load since it will make my page slow, and secondly bcause this detailsview is used for new record and has a lot of validation controls so I have another method for my main GridView on whose select method I pop another DetailsView to edit tht row and that DetailsView has a validation method who won't allow any control on page that isn't validatd. So obviously if I load this new record (this is the 2nd DetailsView) on page load, that other GridView I won't jbe able to edit since that method won't be true since this new record DetailsView boxes will not be validated if they are blank.
So to get around this, I made the modal pop up panel invisible and the new record DetailsView visible=false so it doesn't render on page load but rather on button click. So all I want to do is click newj record button and this pop up panel pops and my DetailsView shows up. Right now it seems to load, but nothing shows. This is what I have:
[Code]....
i have a detailsview and if the tick box field "controlled" = true then I want the edit button to be hidden.
View 34 RepliesI am collecting user data using 3 detailsView, dv1,dv2, and dv3 each connected to sqldatasource , ds1,ds2,ds3. I would like the user to click one button(InsertBtn) and add all the data entered in each detailsview. I added
ds1.insert();
ds2.insert();
ds3.insert();
to OnClick event of InsertBtn. But the data does not get inserted...?? How can I make the user click one button and add the datas in each detalsView to database..???
changing gridview field by clicking a check button in gridviewÂ
View 1 RepliesI'm really struggling with this. How do I display my data with radio buttons in a detail view and bind it to my datasource like I've done with the textbox? The database values are int {yes = 1, no = 0, na = -1}. I want my user to be able to quickly update the radiobuttons instead.I'm working in C#.
<EditItemTemplate>
<asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("Electrical_Panels_Fastened_Securely") %>' ></asp:TextBox>
[code]...
I have a detailsview which has a button for insert and edit depending on mode plus a cancel button. What I am looking to do, is to use the cancel button to stop any insert or update to the database if clicked.
View 2 RepliesI have a detailsview control, which I use to enter data and save to the database. I am using object datasource to connect to the db. The detailsview control has autogenerateinsert = "true". When the insert is successfull, I want to set some variables and and to redirect the page to a different one. I don't know how to access the insert button click event of the detailsview to do it. If there is different solution like using <insertItemTemplate> and using custom linkbuttons.
View 1 RepliesI get all hotels with my datalist. a label shows hotel names and a texbox gets order. I want to update values without clicking Submit.
I placed scriptmanager and update panel. I dont know next step
[Code]....
i got a problem to update my database which i bounded to datagrid. The problem is, i want to update my database only by clicking one update button at the bottom.. when the user click it, all the fields will be updated to database.
View 3 RepliesI have a gridview with edit button. I want to set focus on a textbox in a row when clicking "Edit" button. (it is a label before clicking edit, it become a textbox after clicking edit). However, i can't set it focus in Rowdatabound. By the way, I make a simple .aspx page and just put a textbox on the tabcontainer tab panel. I found that i totally cannot set focus on this text box.
Here is aspx page with a text box, the .aspx page code is below:
[code]....
I have a detailsview control which I use to enter data and save to the database. The control is connected to the db through a objectdatasource. When the insert is successful, I want to set some variables and redirect the page to a different one. The detailsview control has AutoGenerateInsertButton="True". I don't know how to access the insert button click event in the code behind,
View 1 Replieswhat changed do I need to make to my code for it to achieve what I'm after.
At the moment I am getting a "cannot cast to type" error message with the below code.
I have also tried calling the ItemDataBound method in with the parent repeater tags and had no errors but when I clicked on the button it would just move back to the top of the page and would not hide or show any data. Also I have made the div style to none but the first record still shows its child but the rest don't.
[code].....